Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7a38003b authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'omap-for-v4.11/dt-signed-v2' of... 

Merge tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.11 merge window. These
changes add earlycon stdout-path propety for the SoCs so far
tested with it. The other changes are addition of BeagleBone
green and making WLAN work on BeagleBone black wireless and
green wireless. The rest of the changes are the usual enabling
features on various devices:

- Enable devices on am335x-sl50
- Changes to dra7-evm boards to enable enable irqs for dp83867
  eth phys, add pinmux configuration for mmc, remov erratum
  i869 pinmux configurations, disable NAND support because of
  pin conflict, add pcf8575 used for lcd
- Remove NAND partition table for omap3-igep
- Configure USB Ethernet MAC from device tree for beagleboard
  xm, pandaboard, omap5-uevm and igepv5
- Configure am335x-chilisom to wake from RTC-only state
- Update Nanobone for external FRAM chip
- Clean up n900 dts
- Update am335x-phycore and am335x-wega for various devices
- Changes for am57xx-beagle-x15 to implement rgmii2 errata

* tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

: (35 commits)
  ARM: dts: dra72/1-evm: add pcf8575 used for lcd
  ARM: dts: dra7xx: Add stdout-path property
  ARM: dts: am57xx: Add stdout-path property
  ARM: dts: am43xx: Add stdout-path property
  ARM: dts: am33xx: Add stdout-path property
  ARM: dts: am335x-sl50: Enable the Ambient Light Sensor.
  ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander.
  ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock.
  ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory.
  ARM: dts: am335x-sl50: Enable UART1.
  ARM: dts: am335x-sl50: Remove I2C1 node.
  ARM: dts: omap3-igep: Remove NAND partition table
  ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps"
  ARM: dts: am335x-phycore-som: Remove partition tables
  ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
  ARM: dts: Configure BeagleBone peripheral USB VBUS irq
  ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC
  ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC
  ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC
  ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree
  ...

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 2e33f294 d8e166b4

arch/arm/boot/dts/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -569,7 +569,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ 
	am335x-base0033.dtb \

	am335x-bone.dtb \

	am335x-boneblack.dtb \

	am335x-boneblack-wireless.dtb \

	am335x-bonegreen.dtb \

	am335x-bonegreen-wireless.dtb \

	am335x-chiliboard.dtb \

	am335x-cm-t335.dtb \

	am335x-evm.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

+2 −0
Original line number Diff line number Diff line
@@ -207,6 +207,8 @@ 
&usb0 {

	status = "okay";

	dr_mode = "peripheral";

	interrupts-extended = <&intc 18 &tps 0>;

	interrupt-names = "mc", "vbus";

};



&usb1 {

arch/arm/boot/dts/am335x-boneblack-common.dtsi

0 → 100644
+163 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <dt-bindings/display/tda998x.h>



&ldo3_reg {

	regulator-min-microvolt = <1800000>;

	regulator-max-microvolt = <1800000>;

	regulator-always-on;

};



&mmc1 {

	vmmc-supply = <&vmmcsd_fixed>;

};



&mmc2 {

	vmmc-supply = <&vmmcsd_fixed>;

	pinctrl-names = "default";

	pinctrl-0 = <&emmc_pins>;

	bus-width = <8>;

	status = "okay";

};



&am33xx_pinmux {

	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */

			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */

			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */

			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */

			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */

			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */

			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */

			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */

			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */

			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */

			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */

			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */

			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */

			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */

			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */

			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */

			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */

			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */

			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */

			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */

			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */

		>;

	};



	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */

		>;

	};



	mcasp0_pins: mcasp0_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */

			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/

			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */

			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */

			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */

		>;

	};

};



&lcdc {

	status = "okay";



	/* If you want to get 24 bit RGB and 16 BGR mode instead of

	 * current 16 bit RGB and 24 BGR modes, set the propety

	 * below to "crossed" and uncomment the video-ports -property

	 * in tda19988 node.

	 */

	blue-and-red-wiring = "straight";



	port {

		lcdc_0: endpoint@0 {

			remote-endpoint = <&hdmi_0>;

		};

	};

};



&i2c0 {

	tda19988: tda19988 {

		compatible = "nxp,tda998x";

		reg = <0x70>;



		pinctrl-names = "default", "off";

		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;

		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;



		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */

		/* video-ports = <0x234501>; */



		#sound-dai-cells = <0>;

		audio-ports = <	TDA998x_I2S	0x03>;



		ports {

			port@0 {

				hdmi_0: endpoint@0 {

					remote-endpoint = <&lcdc_0>;

				};

			};

		};

	};

};



&rtc {

	system-power-controller;

};



&mcasp0	{

	#sound-dai-cells = <0>;

	pinctrl-names = "default";

	pinctrl-0 = <&mcasp0_pins>;

	status = "okay";

	op-mode = <0>;	/* MCASP_IIS_MODE */

	tdm-slots = <2>;

	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */

			0 0 1 0

		>;

	tx-num-evt = <32>;

	rx-num-evt = <32>;

};



/ {

	clk_mcasp0_fixed: clk_mcasp0_fixed {

		#clock-cells = <0>;

		compatible = "fixed-clock";

		clock-frequency = <24576000>;

	};



	clk_mcasp0: clk_mcasp0 {

		#clock-cells = <0>;

		compatible = "gpio-gate-clock";

		clocks = <&clk_mcasp0_fixed>;

		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */

	};



	sound {

		compatible = "simple-audio-card";

		simple-audio-card,name = "TI BeagleBone Black";

		simple-audio-card,format = "i2s";

		simple-audio-card,bitclock-master = <&dailink0_master>;

		simple-audio-card,frame-master = <&dailink0_master>;



		dailink0_master: simple-audio-card,cpu {

			sound-dai = <&mcasp0>;

			clocks = <&clk_mcasp0>;

		};



		simple-audio-card,codec {

			sound-dai = <&tda19988>;

		};

	};

};

arch/arm/boot/dts/am335x-boneblack-wireless.dts

0 → 100644
+109 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

/dts-v1/;



#include "am33xx.dtsi"

#include "am335x-bone-common.dtsi"

#include "am335x-boneblack-common.dtsi"

#include <dt-bindings/interrupt-controller/irq.h>



/ {

	model = "TI AM335x BeagleBone Black Wireless";

	compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";



	wlan_en_reg: fixedregulator@2 {

		compatible = "regulator-fixed";

		regulator-name = "wlan-en-regulator";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		startup-delay-us= <70000>;



		/* WL_EN */

		gpio = <&gpio3 9 0>;

		enable-active-high;

	};

};



&am33xx_pinmux {

	bt_pins: pinmux_bt_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */

		>;

	};



	mmc3_pins: pinmux_mmc3_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */

			AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */

			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */

			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */

			AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */

			AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */

		>;

	};



	uart3_pins: pinmux_uart3_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */

			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gmii1_rxd2.uart3_txd */

			AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3)		/* mdio_data.uart3_ctsn */

			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* mdio_clk.uart3_rtsn */

		>;

	};



	wl18xx_pins: pinmux_wl18xx_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */

			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */

			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */

		>;

	};

};



&mac {

	status = "disabled";

};



&mmc3 {

	dmas = <&edma_xbar 12 0 1

		&edma_xbar 13 0 2>;

	dma-names = "tx", "rx";

	status = "okay";

	vmmc-supply = <&wlan_en_reg>;

	bus-width = <4>;

	non-removable;

	cap-power-off-card;

	ti,needs-special-hs-handling;

	keep-power-in-suspend;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;



	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@2 {

		compatible = "ti,wl1835";

		reg = <2>;

		interrupt-parent = <&gpio0>;

		interrupts = <29 IRQ_TYPE_EDGE_RISING>;

	};

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins &bt_pins>;

	status = "okay";

};



&gpio3 {

	ls_buf_en {

		gpio-hog;

		gpios = <10 GPIO_ACTIVE_HIGH>;

		output-high;

		line-name = "LS_BUF_EN";

	};

};

arch/arm/boot/dts/am335x-boneblack.dts

+1 −154
Original line number Diff line number Diff line
@@ -9,162 +9,9 @@ 


#include "am33xx.dtsi"

#include "am335x-bone-common.dtsi"

#include <dt-bindings/display/tda998x.h>

#include "am335x-boneblack-common.dtsi"



/ {

	model = "TI AM335x BeagleBone Black";

	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";

};
 


&ldo3_reg {

	regulator-min-microvolt = <1800000>;

	regulator-max-microvolt = <1800000>;

	regulator-always-on;

};



&mmc1 {

	vmmc-supply = <&vmmcsd_fixed>;

};



&mmc2 {

	vmmc-supply = <&vmmcsd_fixed>;

	pinctrl-names = "default";

	pinctrl-0 = <&emmc_pins>;

	bus-width = <8>;

	status = "okay";

};



&am33xx_pinmux {

	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */

			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */

			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */

			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */

			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */

			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */

			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */

			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */

			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */

			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */

			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */

			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */

			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */

			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */

			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */

			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */

			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */

			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */

			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */

			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */

			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */

		>;

	};

	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */

		>;

	};



	mcasp0_pins: mcasp0_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */

			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/

			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */

			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */

			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */

		>;

	};

};



&lcdc {

	status = "okay";



	/* If you want to get 24 bit RGB and 16 BGR mode instead of

	 * current 16 bit RGB and 24 BGR modes, set the propety

	 * below to "crossed" and uncomment the video-ports -property

	 * in tda19988 node.

	 */

	blue-and-red-wiring = "straight";



	port {

		lcdc_0: endpoint@0 {

			remote-endpoint = <&hdmi_0>;

		};

	};

};



&i2c0 {

	tda19988: tda19988 {

		compatible = "nxp,tda998x";

		reg = <0x70>;



		pinctrl-names = "default", "off";

		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;

		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;



		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */

		/* video-ports = <0x234501>; */



		#sound-dai-cells = <0>;

		audio-ports = <	TDA998x_I2S	0x03>;



		ports {

			port@0 {

				hdmi_0: endpoint@0 {

					remote-endpoint = <&lcdc_0>;

				};

			};

		};

	};

};



&rtc {

	system-power-controller;

};



&mcasp0	{

	#sound-dai-cells = <0>;

	pinctrl-names = "default";

	pinctrl-0 = <&mcasp0_pins>;

	status = "okay";

	op-mode = <0>;	/* MCASP_IIS_MODE */

	tdm-slots = <2>;

	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */

			0 0 1 0

		>;

	tx-num-evt = <32>;

	rx-num-evt = <32>;

};



/ {

	clk_mcasp0_fixed: clk_mcasp0_fixed {

		#clock-cells = <0>;

		compatible = "fixed-clock";

		clock-frequency = <24576000>;

	};



	clk_mcasp0: clk_mcasp0 {

		#clock-cells = <0>;

		compatible = "gpio-gate-clock";

		clocks = <&clk_mcasp0_fixed>;

		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */

	};



	sound {

		compatible = "simple-audio-card";

		simple-audio-card,name = "TI BeagleBone Black";

		simple-audio-card,format = "i2s";

		simple-audio-card,bitclock-master = <&dailink0_master>;

		simple-audio-card,frame-master = <&dailink0_master>;



		dailink0_master: simple-audio-card,cpu {

			sound-dai = <&mcasp0>;

			clocks = <&clk_mcasp0>;

		};



		simple-audio-card,codec {

			sound-dai = <&tda19988>;

		};

	};

};