Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 76e691fc authored by Andreas Färber's avatar Andreas Färber Committed by Shawn Guo
Browse files

ARM: dts: imx6sx: Add UDOO Neo support 



Add initial device trees for UDOO Neo Basic, Extended and Full boards:
* Serial console is enabled, other serial ports are prepared.
* I2C based PMIC is enabled.
* Ethernet is enabled for Basic and Full.
* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
* Both user LEDs are enabled, with the orange one reserved for the M4
  and with the SD card as default trigger for the red LED.

The decision on a board compatible string is deferred to later.

Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
Signed-off-by: default avatarAndreas Färber <afaerber@suse.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 4d9e9cbb

arch/arm/boot/dts/Makefile

+4 −1
Original line number Diff line number Diff line
@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ 
	imx6sx-sabreauto.dtb \

	imx6sx-sdb-reva.dtb \

	imx6sx-sdb-sai.dtb \

	imx6sx-sdb.dtb

	imx6sx-sdb.dtb \

	imx6sx-udoo-neo-basic.dtb \

	imx6sx-udoo-neo-extended.dtb \

	imx6sx-udoo-neo-full.dtb

dtb-$(CONFIG_SOC_IMX6UL) += \

	imx6ul-14x14-evk.dtb \

	imx6ul-geam-kit.dtb \

arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts

0 → 100644
+69 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016 Andreas Färber

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This library is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This library is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;



#include "imx6sx-udoo-neo.dtsi"



/ {

	model = "UDOO Neo Basic";

	compatible = "fsl,imx6sx";



	memory {

		reg = <0x80000000 0x20000000>;

	};

};



&fec1 {

	phy-handle = <&ethphy1>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		ethphy1: ethernet-phy@0 {

			compatible = "ethernet-phy-ieee802.3-c22";

			reg = <0>;

		};

	};

};

arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts

0 → 100644
+54 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016 Andreas Färber

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This library is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This library is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;



#include "imx6sx-udoo-neo.dtsi"



/ {

	model = "UDOO Neo Extended";

	compatible = "fsl,imx6sx";



	memory {

		reg = <0x80000000 0x40000000>;

	};

};

arch/arm/boot/dts/imx6sx-udoo-neo-full.dts

0 → 100644
+69 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016 Andreas Färber

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This library is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This library is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;



#include "imx6sx-udoo-neo.dtsi"



/ {

	model = "UDOO Neo Full";

	compatible = "fsl,imx6sx";



	memory {

		reg = <0x80000000 0x40000000>;

	};

};



&fec1 {

	phy-handle = <&ethphy1>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		ethphy1: ethernet-phy@0 {

			compatible = "ethernet-phy-ieee802.3-c22";

			reg = <0>;

		};

	};

};

arch/arm/boot/dts/imx6sx-udoo-neo.dtsi

0 → 100644
+293 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016 Andreas Färber

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This library is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This library is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



#include "imx6sx.dtsi"



/ {

	compatible = "fsl,imx6sx";



	chosen {

		stdout-path = "serial0:115200n8";

	};



	leds {

		compatible = "gpio-leds";



		red {

			label = "udoo-neo:red:mmc";

			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;

			default-state = "off";

			linux,default-trigger = "mmc0";

		};



		orange {

			label = "udoo-neo:orange:user";

			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;

			default-state = "keep";

		};

	};



	reg_sdio_pwr: regulator-sdio-pwr {

		compatible = "regulator-fixed";

		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;

		enable-active-high;

		regulator-name = "SDIO_PWR";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-boot-on;

	};

};



&cpu0 {

	arm-supply = <&sw1a_reg>;

	soc-supply = <&sw1c_reg>;

};



&fec1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet1>;

	phy-mode = "rmii";

	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;

};



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c1>;

	clock-frequency = <100000>;

	status = "okay";



	pmic: pmic@08 {

		compatible = "fsl,pfuze3000";

		reg = <0x08>;



		regulators {

			sw1a_reg: sw1a {

				regulator-min-microvolt = <700000>;

				regulator-max-microvolt = <1475000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <6250>;

			};



			sw1c_reg: sw1b {

				regulator-min-microvolt = <700000>;

				regulator-max-microvolt = <1475000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <6250>;

			};



			sw2_reg: sw2 {

				regulator-min-microvolt = <1500000>;

				regulator-max-microvolt = <1850000>;

				regulator-boot-on;

				regulator-always-on;

			};



			sw3a_reg: sw3 {

				regulator-min-microvolt = <900000>;

				regulator-max-microvolt = <1650000>;

				regulator-boot-on;

				regulator-always-on;

			};



			swbst_reg: swbst {

				regulator-min-microvolt = <5000000>;

				regulator-max-microvolt = <5150000>;

			};



			snvs_reg: vsnvs {

				regulator-min-microvolt = <1000000>;

				regulator-max-microvolt = <3000000>;

				regulator-boot-on;

				regulator-always-on;

			};



			vref_reg: vrefddr {

				regulator-boot-on;

				regulator-always-on;

			};



			vgen1_reg: vldo1 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};



			vgen2_reg: vldo2 {

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <1550000>;

			};



			vgen3_reg: vccsd {

				regulator-min-microvolt = <2850000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};



			vgen4_reg: v33 {

				regulator-min-microvolt = <2850000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};



			vgen5_reg: vldo3 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};



			vgen6_reg: vldo4 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};

		};

	};

};



&iomuxc {

	pinctrl_enet1: enet1grp {

		fsl,pins =

			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,

			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,

			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,

			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,

			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,

			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,



			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,

			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,

			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,

			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,

			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,

			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,



			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;

	};



	pinctrl_i2c1: i2c1grp {

		fsl,pins =

			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,

			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;

	};



	pinctrl_uart1: uart1grp {

		fsl,pins =

			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,

			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;

	};



	pinctrl_uart2: uart2grp {

		fsl,pins =

			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,

			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;

	};



	pinctrl_uart5: uart5grp {

		fsl,pins =

			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,

			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;

	};



	pinctrl_uart6: uart6grp {

		fsl,pins =

			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,

			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,

			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,

			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,

			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,

			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,

			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,

			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;

	};



	pinctrl_usdhc2: usdhc2grp {

		fsl,pins =

			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,

			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,

			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,

			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,

			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,

			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,

			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */

	};

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;

	status = "okay";

};



/* Cortex-M4 serial */

&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart2>;

	status = "disabled";

};



/* Arduino serial */

&uart5 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart5>;

	status = "disabled";

};



&uart6 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart6>;

	uart-has-rtscts;

	status = "disabled";

};



&usdhc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc2>;

	vmmc-supply = <&reg_sdio_pwr>;

	bus-width = <4>;

	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;

	no-1-8-v;

	keep-power-in-suspend;

	wakeup-source;

	status = "okay";

};