Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 73cfe264 authored by Giuseppe CAVALLARO's avatar Giuseppe CAVALLARO Committed by David S. Miller
Browse files

stmmac: do not fail when the timer cannot be used. 



If the external timer cannot be used the driver
will continue to work without mitigation.

Signed-off-by: default avatarGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e6e3625f

drivers/net/stmmac/stmmac_main.c

+28 −22
Original line number Diff line number Diff line
@@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev) 
	unsigned int txsize = priv->dma_tx_size;

	unsigned int rxsize = priv->dma_rx_size;

	unsigned int bfsize = priv->dma_buf_sz;

	int buff2_needed = 0;

	int dis_ic = 0;

	int buff2_needed = 0, dis_ic = 0;



#ifdef CONFIG_STMMAC_TIMER

	/* Using Timers disable interrupts on completion for the reception */

	dis_ic = 1;

#endif

	/* Set the Buffer size according to the MTU;

	 * indeed, in case of jumbo we need to bump-up the buffer sizes.

	 */
@@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev) 
	else

		bfsize = DMA_BUFFER_SIZE;



#ifdef CONFIG_STMMAC_TIMER

	/* Disable interrupts on completion for the reception if timer is on */

	if (likely(priv->tm->enable))

		dis_ic = 1;

#endif

	/* If the MTU exceeds 8k so use the second buffer in the chain */

	if (bfsize >= BUF_SIZE_8KiB)

		buff2_needed = 1;
@@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv) 


static inline void stmmac_enable_irq(struct stmmac_priv *priv)

{

#ifndef CONFIG_STMMAC_TIMER

	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);

#else

#ifdef CONFIG_STMMAC_TIMER

	if (likely(priv->tm->enable))

		priv->tm->timer_start(tmrate);

	else

#endif

	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);

}



static inline void stmmac_disable_irq(struct stmmac_priv *priv)

{

#ifndef CONFIG_STMMAC_TIMER

	writel(0, priv->dev->base_addr + DMA_INTR_ENA);

#else

#ifdef CONFIG_STMMAC_TIMER

	if (likely(priv->tm->enable))

		priv->tm->timer_stop();

	else

#endif

	writel(0, priv->dev->base_addr + DMA_INTR_ENA);

}



static int stmmac_has_work(struct stmmac_priv *priv)
@@ -1031,22 +1033,23 @@ static int stmmac_open(struct net_device *dev) 
	}



#ifdef CONFIG_STMMAC_TIMER

	priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);

	priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);

	if (unlikely(priv->tm == NULL)) {

		pr_err("%s: ERROR: timer memory alloc failed \n", __func__);

		return -ENOMEM;

	}

	priv->tm->freq = tmrate;



	/* Test if the HW timer can be actually used.

	 * In case of failure continue with no timer. */

	/* Test if the external timer can be actually used.

	 * In case of failure continue without timer. */

	if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {

		pr_warning("stmmaceth: cannot attach the HW timer\n");

		pr_warning("stmmaceth: cannot attach the external timer.\n");

		tmrate = 0;

		priv->tm->freq = 0;

		priv->tm->timer_start = stmmac_no_timer_started;

		priv->tm->timer_stop = stmmac_no_timer_stopped;

	}

	} else

		priv->tm->enable = 1;

#endif



	/* Create and initialize the TX/RX descriptors chains. */
@@ -1322,8 +1325,10 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) 


	/* Interrupt on completition only for the latest segment */

	priv->mac_type->ops->close_tx_desc(desc);



#ifdef CONFIG_STMMAC_TIMER

	/* Clean IC while using timers */

	/* Clean IC while using timer */

	if (likely(priv->tm->enable))

		priv->mac_type->ops->clear_tx_ic(desc);

#endif

	/* To avoid raise condition */
@@ -2028,6 +2033,7 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) 


#ifdef CONFIG_STMMAC_TIMER

		priv->tm->timer_stop();

		if (likely(priv->tm->enable))

			dis_ic = 1;

#endif

		napi_disable(&priv->napi);

drivers/net/stmmac/stmmac_timer.h

+1 −0
Original line number Diff line number Diff line
@@ -26,6 +26,7 @@ struct stmmac_timer { 
	void (*timer_start) (unsigned int new_freq);

	void (*timer_stop) (void);

	unsigned int freq;

	unsigned int enable;

};



/* Open the HW timer device and return 0 in case of success */