Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 67d7188a authored by Stephen Boyd's avatar Stephen Boyd
Browse files

Merge branch 'clk-bcm2835' into clk-next 

* clk-bcm2835:
  clk: bcm2835: Add support for programming the audio domain clocks
  clk: bcm2835: Add binding docs for the new platform clock driver.
  clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
parents 53c929c9 41691b88

Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt

0 → 100644
+45 −0
Original line number Diff line number Diff line 
Broadcom BCM2835 CPRMAN clocks



This binding uses the common clock binding:

    Documentation/devicetree/bindings/clock/clock-bindings.txt



The CPRMAN clock controller generates clocks in the audio power domain

of the BCM2835.  There is a level of PLLs deriving from an external

oscillator, a level of PLL dividers that produce channels off of the

few PLLs, and a level of mostly-generic clock generators sourcing from

the PLL channels.  Most other hardware components source from the

clock generators, but a few (like the ARM or HDMI) will source from

the PLL dividers directly.



Required properties:

- compatible:	Should be "brcm,bcm2835-cprman"

- #clock-cells:	Should be <1>. The permitted clock-specifier values can be

		  found in include/dt-bindings/clock/bcm2835.h

- reg:		Specifies base physical address and size of the registers

- clocks:	The external oscillator clock phandle



Example:



	clk_osc: clock@3 {

		compatible = "fixed-clock";

		reg = <3>;

		#clock-cells = <0>;

		clock-output-names = "osc";

		clock-frequency = <19200000>;

	};



	clocks: cprman@7e101000 {

		compatible = "brcm,bcm2835-cprman";

		#clock-cells = <1>;

		reg = <0x7e101000 0x2000>;

		clocks = <&clk_osc>;

	};



	i2c0: i2c@7e205000 {

		compatible = "brcm,bcm2835-i2c";

		reg = <0x7e205000 0x1000>;

		interrupts = <2 21>;

		clocks = <&clocks BCM2835_CLOCK_VPU>;

		#address-cells = <1>;

		#size-cells = <0>;

	};

drivers/clk/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -19,7 +19,6 @@ endif 
obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o

obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o

obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o

obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o

obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o

obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o

obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o

drivers/clk/bcm/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -3,4 +3,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o 
obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o

obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o

obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o

obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o

obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o