Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 (62d3af1b) · Commits · e / devices / android_kernel_oneplus_sm7250

MAINTAINERS

+8 −0

Original line number	Diff line number	Diff line
		@@ -1945,6 +1945,14 @@ M: george@mvista.com
		L: netdev@vger.kernel.org
		S: Supported

		POWERPC 4xx EMAC DRIVER
		P: Eugene Surovegin
		M: ebs@ebshome.net
		W: http://kernel.ebshome.net/emac/
		L: linuxppc-embedded@ozlabs.org
		L: netdev@vger.kernel.org
		S: Maintained

		PNP SUPPORT
		P: Adam Belay
		M: ambx1@neo.rr.com

drivers/net/Kconfig

+57 −20

Original line number	Diff line number	Diff line
		@@ -1163,38 +1163,74 @@ config IBMVETH
		be called ibmveth.

		config IBM_EMAC
		bool "IBM PPC4xx EMAC driver support"
		tristate "PowerPC 4xx on-chip Ethernet support"
		depends on 4xx
		select CRC32
		---help---
		This driver supports the IBM PPC4xx EMAC family of on-chip
		help
		This driver supports the PowerPC 4xx EMAC family of on-chip
		Ethernet controllers.

		config IBM_EMAC_ERRMSG
		bool "Verbose error messages"
		depends on IBM_EMAC && BROKEN

		config IBM_EMAC_RXB
		int "Number of receive buffers"
		depends on IBM_EMAC
		default "128" if IBM_EMAC4
		default "64"
		default "128"

		config IBM_EMAC_TXB
		int "Number of transmit buffers"
		depends on IBM_EMAC
		default "128" if IBM_EMAC4
		default "8"
		default "64"

		config IBM_EMAC_FGAP
		int "Frame gap"
		config IBM_EMAC_POLL_WEIGHT
		int "MAL NAPI polling weight"
		depends on IBM_EMAC
		default "8"
		default "32"

		config IBM_EMAC_SKBRES
		int "Skb reserve amount"
		config IBM_EMAC_RX_COPY_THRESHOLD
		int "RX skb copy threshold (bytes)"
		depends on IBM_EMAC
		default "256"

		config IBM_EMAC_RX_SKB_HEADROOM
		int "Additional RX skb headroom (bytes)"
		depends on IBM_EMAC
		default "0"
		help
		Additional receive skb headroom. Note, that driver
		will always reserve at least 2 bytes to make IP header
		aligned, so usualy there is no need to add any additional
		headroom.

		If unsure, set to 0.

		config IBM_EMAC_PHY_RX_CLK_FIX
		bool "PHY Rx clock workaround"
		depends on IBM_EMAC && (405EP \|\| 440GX \|\| 440EP)
		help
		Enable this if EMAC attached to a PHY which doesn't generate
		RX clock if there is no link, if this is the case, you will
		see "TX disable timeout" or "RX disable timeout" in the system
		log.

		If unsure, say N.

		config IBM_EMAC_DEBUG
		bool "Debugging"
		depends on IBM_EMAC
		default n

		config IBM_EMAC_ZMII
		bool
		depends on IBM_EMAC && (NP405H \|\| NP405L \|\| 44x)
		default y

		config IBM_EMAC_RGMII
		bool
		depends on IBM_EMAC && 440GX
		default y

		config IBM_EMAC_TAH
		bool
		depends on IBM_EMAC && 440GX
		default y

		config NET_PCI
		bool "EISA, VLB, PCI and on board controllers"
		@@ -1775,6 +1811,7 @@ config NE_H8300
		controller on the Renesas H8/300 processor.

		source "drivers/net/fec_8xx/Kconfig"
		source "drivers/net/fs_enet/Kconfig"

		endmenu

		@@ -2201,8 +2238,8 @@ config S2IO
		depends on PCI
		---help---
		This driver supports the 10Gbe XFrame NIC of S2IO.
		For help regarding driver compilation, installation and
		tuning please look into ~/drivers/net/s2io/README.txt.
		More specific information on configuring the driver is in
		<file:Documentation/networking/s2io.txt>.

		config S2IO_NAPI
		bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"

drivers/net/Makefile

+3 −0

Original line number	Diff line number	Diff line
		@@ -203,3 +203,6 @@ obj-$(CONFIG_IRDA) += irda/
		obj-$(CONFIG_ETRAX_ETHERNET) += cris/

		obj-$(CONFIG_NETCONSOLE) += netconsole.o

		obj-$(CONFIG_FS_ENET) += fs_enet/

drivers/net/acenic.c

+2 −4

Original line number	Diff line number	Diff line
		@@ -871,9 +871,7 @@ static void ace_init_cleanup(struct net_device *dev)
		if (ap->info)
		pci_free_consistent(ap->pdev, sizeof(struct ace_info),
		ap->info, ap->info_dma);
		if (ap->skb)
		kfree(ap->skb);
		if (ap->trace_buf)
		kfree(ap->trace_buf);

		if (dev->irq)

drivers/net/amd8111e.c

100755 → 100644

+0 −0

File mode changed from 100755 to 100644.

View file