Merge "ARM: dts: msm: Update pm8916 DTSI for 4.19 kernel" (62c946f5) · Commits · e / devices / android_kernel_oneplus_sm7250

qcom/pm8916.dtsi

+96 −304

Original line number	Original line	Diff line number	Diff line
			#include <dt-bindings/interrupt-controller/irq.h>
			#include <dt-bindings/spmi/spmi.h>

	&spmi_bus {		&spmi_bus {

	qcom,pm8916@0 {		pm8916_0: pm8916@0 {
	reg = <0x0>;		compatible = "qcom,pm8916", "qcom,spmi-pmic";
	#address-cells = <1>;		reg = <0 SPMI_USID>;
	#size-cells = <1>;		#address-cells = <2>;
			#size-cells = <0>;

	pm8916_revid: qcom,revid@100 {		pm8916_revid: qcom,revid@100 {
	compatible = "qcom,qpnp-revid";		compatible = "qcom,qpnp-revid";
	@@ -13,8 +17,8 @@
	pm8916_pon: qcom,power-on@800 {		pm8916_pon: qcom,power-on@800 {
	compatible = "qcom,qpnp-power-on";		compatible = "qcom,qpnp-power-on";
	reg = <0x800 0x100>;		reg = <0x800 0x100>;
	interrupts = <0x0 0x8 0x0>,		interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,
	<0x0 0x8 0x1>;		<0x0 0x8 0x1 IRQ_TYPE_NONE>;
	interrupt-names = "kpdpwr", "resin";		interrupt-names = "kpdpwr", "resin";
	qcom,pon-dbc-delay = <15625>;		qcom,pon-dbc-delay = <15625>;
	qcom,system-reset;		qcom,system-reset;
	@@ -38,77 +42,35 @@
	};		};
	};		};

	pm8916_mpps: mpps {		pm8916_gpios: pinctrl@c000 {
			compatible = "qcom,pm8916-gpio";
			reg = <0xc000 0x400>;
	gpio-controller;		gpio-controller;
	#gpio-cells = <2>;		#gpio-cells = <2>;
	#address-cells = <1>;		interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
	#size-cells = <1>;		<0 0xc1 0 IRQ_TYPE_NONE>,
	label = "pm8916-mpp";		<0 0xc2 0 IRQ_TYPE_NONE>,
			<0 0xc3 0 IRQ_TYPE_NONE>;
	mpp@a000 {		interrupt-names = "pm8916_gpio1", "pm8916_gpio2",
	reg = <0xa000 0x100>;		"pm8916_gpio3", "pm8916_gpio4";
	qcom,pin-num = <1>;
	};		};

	mpp@a100 {		pm8916_mpps: mpps@a000 {
	reg = <0xa100 0x100>;		compatible = "qcom,pm8916-mpp";
	qcom,pin-num = <2>;		reg = <0xa000 0x400>;
	};

	mpp@a200 {
	reg = <0xa200 0x100>;
	qcom,pin-num = <3>;
	};

	mpp@a300 {
	reg = <0xa300 0x100>;
	qcom,pin-num = <4>;
	};
	};

	pm8916_gpios: gpios {
	gpio-controller;		gpio-controller;
	#gpio-cells = <2>;		#gpio-cells = <2>;
	#address-cells = <1>;		interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
	#size-cells = <1>;		<0 0xa1 0 IRQ_TYPE_NONE>,
	label = "pm8916-gpio";		<0 0xa2 0 IRQ_TYPE_NONE>,
			<0 0xa3 0 IRQ_TYPE_NONE>;
	gpio@c000 {		interrupt-names = "pm8916_mpp1", "pm8916_mpp2",
	reg = <0xc000 0x100>;		"pm8916_mpp3", "pm8916_mpp4";
	qcom,pin-num = <1>;
	};

	gpio@c100 {
	reg = <0xc100 0x100>;
	qcom,pin-num = <2>;
	};

	gpio@c200 {
	reg = <0xc200 0x100>;
	qcom,pin-num = <3>;
	};

	gpio@c300 {
	reg = <0xc300 0x100>;
	qcom,pin-num = <4>;
	};
	};		};

	pm8916_rtc: qcom,pm8916_rtc {		pm8916_rtc: qcom,pm8916_rtc {
	compatible = "qcom,qpnp-rtc";		compatible = "qcom,pm8916-rtc";
	#address-cells = <1>;		interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
	#size-cells = <1>;
	qcom,qpnp-rtc-write = <0>;
	qcom,qpnp-rtc-alarm-pwrup = <0>;

	qcom,pm8916_rtc_rw@6000 {
	reg = <0x6000 0x100>;
	};

	qcom,pm8916_rtc_alarm@6100 {
	reg = <0x6100 0x100>;
	interrupts = <0x0 0x61 0x1>;
	};
	};		};

	pm8916_vadc: vadc@3100 {		pm8916_vadc: vadc@3100 {
	@@ -116,12 +78,13 @@
	reg = <0x3100 0x100>;		reg = <0x3100 0x100>;
	#address-cells = <1>;		#address-cells = <1>;
	#size-cells = <0>;		#size-cells = <0>;
	interrupts = <0x0 0x31 0x0>;		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
	interrupt-names = "eoc-int-en-set";		interrupt-names = "eoc-int-en-set";
	qcom,adc-bit-resolution = <15>;		qcom,adc-bit-resolution = <15>;
	qcom,adc-vdd-reference = <1800>;		qcom,adc-vdd-reference = <1800>;
	qcom,vadc-poll-eoc;		qcom,vadc-poll-eoc;
	qcom,pmic-revid = <&pm8916_revid>;		qcom,pmic-revid = <&pm8916_revid>;
			#thermal-sensor-cells = <1>;

	chan@8 {		chan@8 {
	label = "die_temp";		label = "die_temp";
	@@ -160,20 +123,22 @@
	pm8916_tz: qcom,temp-alarm@2400 {		pm8916_tz: qcom,temp-alarm@2400 {
	compatible = "qcom,spmi-temp-alarm";		compatible = "qcom,spmi-temp-alarm";
	reg = <0x2400 0x100>;		reg = <0x2400 0x100>;
	interrupts = <0x0 0x24 0x0>;		interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
	label = "pm8916_tz";		label = "pm8916_tz";
	qcom,channel-num = <8>;		qcom,channel-num = <8>;
	qcom,threshold-set = <0>;		qcom,threshold-set = <0>;
	qcom,temp_alarm-vadc = <&pm8916_vadc>;		qcom,temp_alarm-vadc = <&pm8916_vadc>;
			#thermal-sensor-cells = <0>;
	};		};

	pm8916_adc_tm: vadc@3400 {		pm8916_adc_tm: vadc@3400 {
			compatible = "qcom,adc-tm-rev2";
	reg = <0x3400 0x100>;		reg = <0x3400 0x100>;
	#address-cells = <1>;		#address-cells = <1>;
	#size-cells = <0>;		#size-cells = <0>;
	interrupts = <0x0 0x34 0x0>,		interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>,
	<0x0 0x34 0x3>,		<0x0 0x34 0x3 IRQ_TYPE_EDGE_RISING>,
	<0x0 0x34 0x4>;		<0x0 0x34 0x4 IRQ_TYPE_EDGE_RISING>;
	interrupt-names = "eoc-int-en-set",		interrupt-names = "eoc-int-en-set",
	"high-thr-en-set",		"high-thr-en-set",
	"low-thr-en-set";		"low-thr-en-set";
	@@ -184,8 +149,10 @@
	};		};

	pm8916_chg: qcom,charger {		pm8916_chg: qcom,charger {
			compatible = "qcom,qpnp-linear-charger";
	#address-cells = <1>;		#address-cells = <1>;
	#size-cells = <1>;		#size-cells = <1>;
			#cooling-cells = <2>;

	qcom,vddmax-mv = <4200>;		qcom,vddmax-mv = <4200>;
	qcom,vddsafe-mv = <4200>;		qcom,vddsafe-mv = <4200>;
	@@ -201,6 +168,7 @@
	qcom,batt-hot-percentage = <25>;		qcom,batt-hot-percentage = <25>;
	qcom,batt-cold-percentage = <80>;		qcom,batt-cold-percentage = <80>;
	qcom,tchg-mins = <232>;		qcom,tchg-mins = <232>;
			qcom,resume-soc = <99>;
	qcom,chg-vadc = <&pm8916_vadc>;		qcom,chg-vadc = <&pm8916_vadc>;
	qcom,chg-adc_tm = <&pm8916_adc_tm>;		qcom,chg-adc_tm = <&pm8916_adc_tm>;

	@@ -208,10 +176,11 @@

	qcom,chgr@1000 {		qcom,chgr@1000 {
	reg = <0x1000 0x100>;		reg = <0x1000 0x100>;
	interrupts = <0x0 0x10 0x7>,		interrupts =
	<0x0 0x10 0x6>,		<0x0 0x10 0x7 IRQ_TYPE_EDGE_RISING>,
	<0x0 0x10 0x5>,		<0x0 0x10 0x6 IRQ_TYPE_EDGE_RISING>,
	<0x0 0x10 0x0>;		<0x0 0x10 0x5 IRQ_TYPE_EDGE_BOTH>,
			<0x0 0x10 0x0 IRQ_TYPE_EDGE_FALLING>;
	interrupt-names = "chg-done",		interrupt-names = "chg-done",
	"chg-failed",		"chg-failed",
	"fast-chg-on",		"fast-chg-on",
	@@ -220,17 +189,18 @@

	qcom,bat-if@1200 {		qcom,bat-if@1200 {
	reg = <0x1200 0x100>;		reg = <0x1200 0x100>;
	interrupts = <0x0 0x12 0x1>,		interrupts = <0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,
	<0x0 0x12 0x0>;		<0x0 0x12 0x0 IRQ_TYPE_EDGE_BOTH>;
	interrupt-names = "bat-temp-ok",		interrupt-names = "bat-temp-ok",
	"batt-pres";		"batt-pres";
	};		};

	qcom,usb-chgpth@1300 {		qcom,usb-chgpth@1300 {
	reg = <0x1300 0x100>;		reg = <0x1300 0x100>;
	interrupts = <0 0x13 0x4>,		interrupts =
	<0 0x13 0x2>,		<0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
	<0 0x13 0x1>;		<0 0x13 0x2 IRQ_TYPE_EDGE_RISING>,
			<0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>;
	interrupt-names = "usb-over-temp",		interrupt-names = "usb-over-temp",
	"chg-gone",		"chg-gone",
	"usbin-valid";		"usbin-valid";
	@@ -242,6 +212,7 @@
	};		};

	pm8916_bms: qcom,vmbms {		pm8916_bms: qcom,vmbms {
			compatible = "qcom,qpnp-vm-bms";
	#address-cells = <1>;		#address-cells = <1>;
	#size-cells = <1>;		#size-cells = <1>;
	status = "disabled";		status = "disabled";
	@@ -266,7 +237,6 @@
	qcom,force-s3-on-suspend;		qcom,force-s3-on-suspend;
	qcom,force-s2-in-charging;		qcom,force-s2-in-charging;
	qcom,report-charger-eoc;		qcom,report-charger-eoc;
	qcom,resume-soc = <99>;

	qcom,batt-pres-status@1208 {		qcom,batt-pres-status@1208 {
	reg = <0x1208 0x1>;		reg = <0x1208 0x1>;
	@@ -278,12 +248,12 @@

	qcom,vm-bms@4000 {		qcom,vm-bms@4000 {
	reg = <0x4000 0x100>;		reg = <0x4000 0x100>;
	interrupts = <0x0 0x40 0x0>,		interrupts = <0x0 0x40 0x0 IRQ_TYPE_NONE>,
	<0x0 0x40 0x1>,		<0x0 0x40 0x1 IRQ_TYPE_NONE>,
	<0x0 0x40 0x2>,		<0x0 0x40 0x2 IRQ_TYPE_NONE>,
	<0x0 0x40 0x3>,		<0x0 0x40 0x3 IRQ_TYPE_NONE>,
	<0x0 0x40 0x4>,		<0x0 0x40 0x4 IRQ_TYPE_NONE>,
	<0x0 0x40 0x5>;		<0x0 0x40 0x5 IRQ_TYPE_NONE>;

	interrupt-names = "leave_cv",		interrupt-names = "leave_cv",
	"enter_cv",		"enter_cv",
	@@ -295,192 +265,24 @@
	};		};

	pm8916_leds: qcom,leds@a100 {		pm8916_leds: qcom,leds@a100 {
			compatible = "qcom,leds-qpnp";
	reg = <0xa100 0x100>;		reg = <0xa100 0x100>;
	label = "mpp";		label = "mpp";
	};		};
	};		};

	qcom,pm8916@1 {		pm8916_1: pm8916@1 {
	reg = <0x1>;		compatible = "qcom,pm8916", "qcom,spmi-pmic";
	#address-cells = <1>;		reg = <1 SPMI_USID>;
	#size-cells = <1>;		#address-cells = <2>;
			#size-cells = <0>;
	regulator@1400 {
	regulator-name = "8916_s1";
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0x1700 0x300>;
	status = "disabled";

	qcom,ctl@1700 {
	reg = <0x1700 0x100>;
	};

	qcom,ps@1800 {
	reg = <0x1800 0x100>;
	};

	qcom,freq@1900 {
	reg = <0x1900 0x100>;
	};
	};

	regulator@1a00 {
	regulator-name = "8916_s3";
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0x1a00 0x300>;
	status = "disabled";

	qcom,ctl@1a00 {
	reg = <0x1a00 0x100>;
	};

	qcom,ps@1b00 {
	reg = <0x1b00 0x100>;
	};

	qcom,freq@1c00 {
	reg = <0x1c00 0x100>;
	};
	};

	regulator@1d00 {
	regulator-name = "8916_s4";
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0x1d00 0x300>;
	status = "disabled";

	qcom,ctl@1d00 {
	reg = <0x1d00 0x100>;
	};

	qcom,ps@1e00 {
	reg = <0x1e00 0x100>;
	};

	qcom,freq@1f00 {
	reg = <0x1f00 0x100>;
	};

	};

	regulator@4000 {
	regulator-name = "8916_l1";
	reg = <0x4000 0x100>;
	status = "disabled";
	};

	regulator@4100 {
	regulator-name = "8916_l2";
	reg = <0x4100 0x100>;
	status = "disabled";
	};

	regulator@4200 {
	regulator-name = "8916_l3";
	reg = <0x4200 0x100>;
	status = "disabled";
	};

	regulator@4300 {
	regulator-name = "8916_l4";
	reg = <0x4300 0x100>;
	status = "disabled";
	};

	regulator@4400 {
	regulator-name = "8916_l5";
	reg = <0x4400 0x100>;
	status = "disabled";
	};

	regulator@4500 {
	regulator-name = "8916_l6";
	reg = <0x4500 0x100>;
	status = "disabled";
	};

	regulator@4600 {
	regulator-name = "8916_l7";
	reg = <0x4600 0x100>;
	status = "disabled";
	};

	regulator@4700 {
	regulator-name = "8916_l8";
	reg = <0x4700 0x100>;
	status = "disabled";
	};

	regulator@4800 {
	regulator-name = "8916_l9";
	reg = <0x4800 0x100>;
	status = "disabled";
	};

	regulator@4900 {
	regulator-name = "8916_l10";
	reg = <0x4900 0x100>;
	status = "disabled";
	};

	regulator@4a00 {
	regulator-name = "8916_l11";
	reg = <0x4a00 0x100>;
	status = "disabled";
	};

	regulator@4b00 {
	regulator-name = "8916_l12";
	reg = <0x4b00 0x100>;
	status = "disabled";
	};

	regulator@4c00 {
	regulator-name = "8916_l13";
	reg = <0x4c00 0x100>;
	status = "disabled";
	};

	regulator@4d00 {
	regulator-name = "8916_l14";
	reg = <0x4d00 0x100>;
	status = "disabled";
	};

	regulator@4e00 {
	regulator-name = "8916_l15";
	reg = <0x4e00 0x100>;
	status = "disabled";
	};

	regulator@4f00 {
	regulator-name = "8916_l16";
	reg = <0x4f00 0x100>;
	status = "disabled";
	};

	regulator@5000 {
	regulator-name = "8916_l17";
	reg = <0x5000 0x100>;
	status = "disabled";
	};

	regulator@5100 {
	regulator-name = "8916_l18";
	reg = <0x5100 0x100>;
	status = "disabled";
	};

	pm8916_pwm: qcom,pwms@bc00 {		pm8916_pwm: qcom,pwms@bc00 {
	compatible = "qcom,pwm-lpg";		compatible = "qcom,pwm-lpg";
	reg = <0xbc00 0x100>;		reg = <0xbc00 0x100>;
	reg-names = "qpnp-lpg-channel-base";		reg-names = "lpg-base";
	qcom,channel-id = <0>;
	qcom,supported-sizes = <6>, <9>;
	#pwm-cells = <2>;		#pwm-cells = <2>;
			qcom,num-lpg-channels = <1>;
	};		};

	pm8916_vib: qcom,vibrator@c000 {		pm8916_vib: qcom,vibrator@c000 {
	@@ -491,16 +293,17 @@
	};		};

	pm8916_tombak_dig: msm8x16_wcd_codec@f000 {		pm8916_tombak_dig: msm8x16_wcd_codec@f000 {
			compatible = "qcom,msm8x16_wcd_codec";
	reg = <0xf000 0x100>;		reg = <0xf000 0x100>;
	interrupt-parent = <&spmi_bus>;		interrupt-parent = <&spmi_bus>;
	interrupts = <0x1 0xf0 0x0>,		interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x1>,		<0x1 0xf0 0x1 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x2>,		<0x1 0xf0 0x2 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x3>,		<0x1 0xf0 0x3 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x4>,		<0x1 0xf0 0x4 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x5>,		<0x1 0xf0 0x5 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x6>,		<0x1 0xf0 0x6 IRQ_TYPE_NONE>,
	<0x1 0xf0 0x7>;		<0x1 0xf0 0x7 IRQ_TYPE_NONE>;
	interrupt-names = "spk_cnp_int",		interrupt-names = "spk_cnp_int",
	"spk_clip_int",		"spk_clip_int",
	"spk_ocp_int",		"spk_ocp_int",
	@@ -538,17 +341,19 @@
	"cdc-vdda-cp";		"cdc-vdda-cp";

	qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias";		qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias";
			qcom,subsys-name = "modem";
	};		};

	pm8916_tombak_analog: msm8x16_wcd_codec@f100 {		pm8916_tombak_analog: msm8x16_wcd_codec@f100 {
			compatible = "qcom,msm8x16_wcd_codec";
	reg = <0xf100 0x100>;		reg = <0xf100 0x100>;
	interrupt-parent = <&spmi_bus>;		interrupt-parent = <&spmi_bus>;
	interrupts = <0x1 0xf1 0x0>,		interrupts = <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
	<0x1 0xf1 0x1>,		<0x1 0xf1 0x1 IRQ_TYPE_NONE>,
	<0x1 0xf1 0x2>,		<0x1 0xf1 0x2 IRQ_TYPE_NONE>,
	<0x1 0xf1 0x3>,		<0x1 0xf1 0x3 IRQ_TYPE_NONE>,
	<0x1 0xf1 0x4>,		<0x1 0xf1 0x4 IRQ_TYPE_NONE>,
	<0x1 0xf1 0x5>;		<0x1 0xf1 0x5 IRQ_TYPE_NONE>;
	interrupt-names = "ear_ocp_int",		interrupt-names = "ear_ocp_int",
	"hphr_ocp_int",		"hphr_ocp_int",
	"hphl_ocp_det",		"hphl_ocp_det",
	@@ -556,18 +361,5 @@
	"hphr_cnp_int",		"hphr_cnp_int",
	"hphl_cnp_int";		"hphl_cnp_int";
	};		};

	pm8916_bcm: qpnp-buck-current-monitor@1800 {
	reg = <0x1800 0x100>;
	interrupts = <1 0x18 0>, <1 0x18 1>;
	interrupt-names = "iwarning", "icritical";
	qcom,enable-current-monitor;
	qcom,icrit-init-threshold-pc = <90>;
	qcom,iwarn-init-threshold-pc = <70>;
	qcom,icrit-polling-delay-msec = <1000>;
	qcom,iwarn-polling-delay-msec = <2000>;

	status = "disabled";
	};
	};		};
	};		};