Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 62549b74 authored by Abhishek Ambure's avatar Abhishek Ambure Committed by snandini
Browse files

qcacmn: Add reason codes to report various connect fail 

The connection process fails for several reasons and the status codes
defined in IEEE802.11 specification doesn't cover the locally generated
reason codes. Add an attribute to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor sub command which can be used by driver/firmware to report various
additional reason codes for connection failures.

Change-Id: Ibab4696fba34f7a18fb8b5f8601e90c5dfcba89e
CRs-Fixed: 2799153
parent e149a8f5

os_if/linux/qca_vendor.h

+38 −0
Original line number Diff line number Diff line
@@ -9091,6 +9091,15 @@ enum qca_vendor_wlan_sta_guard_interval { 
 * only. This represents number of Beacon frames received from this station with

 * the packet number less than or equal to the last received packet number when

 * beacon protection is enabled.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE: u32, used in

 * STA mode only. Driver uses this attribute to populate the connection failure

 * reason codes and the values are defined in

 * enum qca_sta_connect_fail_reason_codes. Userspace applications can send

 * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command after receiving

 * connection failure from driver. The driver shall not include this attribute

 * in response to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no

 * connection failure observed in the last attempted connection.

 */

enum qca_wlan_vendor_attr_get_sta_info {

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
@@ -9133,6 +9142,7 @@ enum qca_wlan_vendor_attr_get_sta_info { 
	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT = 40,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43,



	/* keep last */

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
@@ -9220,6 +9230,34 @@ enum qca_disconnect_reason_codes { 
	QCA_DISCONNECT_REASON_USER_TRIGGERED = 16,

};



/**

 * enum qca_sta_connect_fail_reason_codes - Defines values carried

 * by QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE vendor

 * attribute.

 * @QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND: No probe response frame received

 * for unicast probe request.

 * @QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL: STA failed to send auth request.

 * @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED: AP didn't send ACK for

 * ath request.

 * @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED: Auth response is not

 * received from AP.

 * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL: STA failed to send assoc

 * request.

 * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED: AP didn't send ACK for

 * assoc request.

 * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED: Assoc response is not

 * received from AP.

 */

enum qca_sta_connect_fail_reason_codes {

	QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND = 1,

	QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL = 2,

	QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED = 3,

	QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED = 4,

	QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL = 5,

	QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED = 6,

	QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED = 7,

};



/**

 * enum qca_wlan_vendor_attr_driver_disconnect_reason - Defines attributes

 * used by %QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command.