[ARM] msm: Update list of proc_comm enums.

	PCOM_RESET_CHIP_IMM,

	PCOM_PM_VID_EN,

	PCOM_VREG_PULLDOWN,

	PCOM_GET_MODEM_VERSION,

	PCOM_CLK_REGIME_SEC_RESET,

	PCOM_CLK_REGIME_SEC_RESET_ASSERT,

	PCOM_CLK_REGIME_SEC_RESET_DEASSERT,

	PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,

	PCOM_CLK_REGIME_SEC_ENABLE,

	PCOM_CLK_REGIME_SEC_DISABLE,

	PCOM_CLK_REGIME_SEC_IS_ON,

	PCOM_CLK_REGIME_SEC_SEL_CLK_INV,

	PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,

	PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,

	PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,

	PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,

	PCOM_CLK_REGIME_SEC_SEL_SPEED,

	PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,

	PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,

	PCOM_CLK_REGIME_SEC_USB_XTAL_ON,

	PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,

	PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,

	PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,

	PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,

	PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,

	PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,

	PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,

	PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,

	PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,

	PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,

	PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,

	PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,

	PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,

	PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,

	PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,

	PCOM_CLK_REGIME_SEC_LCD_CTRL,

	PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,

	PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,

	PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,

	PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,

	PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,

	PCOM_GPIO_CONFIG,

	PCOM_GPIO_CONFIGURE_GROUP,

	PCOM_GPIO_TLMM_SET_PORT,

	PCOM_GPIO_TLMM_CONFIG_EX,

	PCOM_SET_FTM_BOOT_COUNT,

	PCOM_RESERVED0,

	PCOM_RESERVED1,

	PCOM_CUSTOMER_CMD1,

	PCOM_CUSTOMER_CMD2,

	PCOM_CUSTOMER_CMD3,

	PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,

	PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,

	PCOM_CLK_REGIME_SEC_RAIL_DISABLE,

	PCOM_CLK_REGIME_SEC_RAIL_ENABLE,

	PCOM_CLK_REGIME_SEC_RAIL_CONTROL,

	PCOM_SET_SW_WATCHDOG_STATE,

	PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,

	PCOM_PM_MPP_CONFIG_I_SINK,

	PCOM_RESERVED_101,

	PCOM_MSM_HSUSB_PHY_RESET,

	PCOM_GET_BATT_MV_LEVEL,

	PCOM_CHG_USB_IS_PC_CONNECTED,

	PCOM_CHG_USB_IS_CHARGER_CONNECTED,

	PCOM_CHG_USB_IS_DISCONNECTED,

	PCOM_CHG_USB_IS_AVAILABLE,

	PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,

	PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,

	PCOM_CLKCTL_RPC_RESET_ASSERT,

	PCOM_CLKCTL_RPC_RESET_DEASSERT,

	PCOM_CLKCTL_RPC_RAIL_ON,

	PCOM_CLKCTL_RPC_RAIL_OFF,

	PCOM_CLKCTL_RPC_RAIL_ENABLE,

	PCOM_CLKCTL_RPC_RAIL_DISABLE,

	PCOM_CLKCTL_RPC_RAIL_CONTROL,

	PCOM_CLKCTL_RPC_MIN_MSMC1,

	PCOM_NUM_CMDS,

};

	PCOM_CMD_RUNNING,

	PCOM_CMD_SUCCESS,

	PCOM_CMD_FAIL,

	PCOM_CMD_FAIL_FALSE_RETURNED,

	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,

	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,

	PCOM_CMD_FAIL_CMD_UNREGISTERED,

	PCOM_CMD_FAIL_CMD_LOCKED,

	PCOM_CMD_FAIL_SERVER_NOT_YET_READY,

	PCOM_CMD_FAIL_BAD_DESTINATION,

	PCOM_CMD_FAIL_SERVER_RESET,

	PCOM_CMD_FAIL_SMSM_NOT_INIT,

	PCOM_CMD_FAIL_PROC_COMM_BUSY,

	PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,

};

/* List of VREGs that support the Pull Down Resistor setting. */

enum {

enum vreg_pdown_id {

	PM_VREG_PDOWN_MSMA_ID,

	PM_VREG_PDOWN_MSMP_ID,

	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */

	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID

};

enum {

        PCOM_CLKRGM_APPS_RESET_USB_PHY  = 34,

        PCOM_CLKRGM_APPS_RESET_USBH     = 37,

};

/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */

#define GPIO_ENABLE	0