Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 598699d0 authored by Maxime Ripard's avatar Maxime Ripard
Browse files

ARM: sun7i: i12 tvbox: Convert to DT label based syntax 



In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 9bb08254

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

+125 −127
Original line number Diff line number Diff line
@@ -57,54 +57,135 @@ 
	model = "I12 / Q5 / QT840A A20 tvbox";

	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";



	soc@01c00000 {

		mmc0: mmc@01c0f000 {

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

			cd-inverted;

			status = "okay";

		pinctrl-0 = <&led_pins_i12_tvbox>;



		red {

			label = "i12_tvbox:red:usr";

			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;

		};



		blue {

			label = "i12_tvbox:blue:usr";

			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;

		};

	};



		mmc3: mmc@01c12000 {

	reg_vmmc3: vmmc3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

			pinctrl-0 = <&mmc3_pins_a>;

			vmmc-supply = <&reg_vmmc3>;

			bus-width = <4>;

			non-removable;

		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;

		regulator-name = "vmmc3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		enable-active-high;

		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;

	};



	reg_vmmc3_io: vmmc3-io {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;

		regulator-name = "vmmc3-io";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		/* This controls VCC-PI, must be always on! */

		regulator-always-on;

		enable-active-high;

		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;

	};



	reg_gmac_3v3: gmac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;

		regulator-name = "gmac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <50000>;

		enable-active-high;

		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;

	};

};



&ehci0 {

	status = "okay";

};



		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			usb2_vbus-supply = <&reg_usb2_vbus>;

&ehci1 {

	status = "okay";

};



		ehci0: usb@01c14000 {

&gmac {

	pinctrl-names = "default";

	pinctrl-0 = <&gmac_pins_mii_a>;

	phy = <&phy1>;

	phy-mode = "mii";

	phy-supply = <&reg_gmac_3v3>;

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};



		ohci0: usb@01c14400 {

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";



	axp209: pmic@34 {

		compatible = "x-powers,axp209";

		reg = <0x34>;

		interrupt-parent = <&nmi_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



		interrupt-controller;

		#interrupt-cells = <1>;

	};

};



		ehci1: usb@01c1c000 {

&ir0 {

	pinctrl-names = "default";

	pinctrl-0 = <&ir0_pins_a>;

	status = "okay";

};



		ohci1: usb@01c1c400 {

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

	cd-inverted;

	status = "okay";

};



		pinctrl@01c20800 {

			mmc3_pins_a: mmc3@0 {

&mmc3 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc3_pins_a>;

	vmmc-supply = <&reg_vmmc3>;

	bus-width = <4>;

	non-removable;

	status = "okay";

};



&mmc3_pins_a {

	/* AP6210 / AP6330 requires pull-up */

	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};



&ohci0 {

	status = "okay";

};



&ohci1 {

	status = "okay";

};



&pio {

	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {

		allwinner,pins = "PH2";

		allwinner,function = "gpio_out";
@@ -134,105 +215,22 @@ 
	};

};



		ir0: ir@01c21800 {

			pinctrl-names = "default";

			pinctrl-0 = <&ir0_pins_a>;

			status = "okay";

		};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

&reg_usb1_vbus {

	status = "okay";



			axp209: pmic@34 {

				compatible = "x-powers,axp209";

				reg = <0x34>;

				interrupt-parent = <&nmi_intc>;

				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



				interrupt-controller;

				#interrupt-cells = <1>;

			};

};



		gmac: ethernet@01c50000 {

			pinctrl-names = "default";

			pinctrl-0 = <&gmac_pins_mii_a>;

			phy = <&phy1>;

			phy-mode = "mii";

			phy-supply = <&reg_gmac_3v3>;

&reg_usb2_vbus {

	status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};

};



	leds {

		compatible = "gpio-leds";

&uart0 {

	pinctrl-names = "default";

		pinctrl-0 = <&led_pins_i12_tvbox>;



		red {

			label = "i12_tvbox:red:usr";

			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;

		};



		blue {

			label = "i12_tvbox:blue:usr";

			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;

		};

	};



	reg_usb1_vbus: usb1-vbus {

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



	reg_usb2_vbus: usb2-vbus {

&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

};
 


	reg_vmmc3: vmmc3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;

		regulator-name = "vmmc3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		enable-active-high;

		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;

	};



	reg_vmmc3_io: vmmc3-io {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;

		regulator-name = "vmmc3-io";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		/* This controls VCC-PI, must be always on! */

		regulator-always-on;

		enable-active-high;

		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;

	};



	reg_gmac_3v3: gmac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;

		regulator-name = "gmac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <50000>;

		enable-active-high;

		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;

	};

};