Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 581b19e5 authored by Maxime Ripard's avatar Maxime Ripard
Browse files

ARM: sun7i: olinuxino micro: Convert to DT label based syntax 



In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 6bd0027e

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

+181 −183
Original line number Diff line number Diff line
@@ -68,83 +68,73 @@ 
		spi1 = &spi2;

	};



	soc@01c00000 {

		spi1: spi@01c06000 {

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

			pinctrl-0 = <&spi1_pins_a>;

			status = "okay";

		};

		pinctrl-0 = <&led_pins_olinuxino>;



		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

			cd-inverted;

			status = "okay";

		green {

			label = "a20-olinuxino-micro:green:usr";

			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;

			default-state = "on";

		};

	};



		mmc3: mmc@01c12000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */

			cd-inverted;

			status = "okay";

};



		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			usb2_vbus-supply = <&reg_usb2_vbus>;

&ahci {

	target-supply = <&reg_ahci_5v>;

	status = "okay";

};



		ehci0: usb@01c14000 {

&ehci0 {

	status = "okay";

};



		ohci0: usb@01c14400 {

&ehci1 {

	status = "okay";

};



		spi2: spi@01c17000 {

&gmac {

	pinctrl-names = "default";

			pinctrl-0 = <&spi2_pins_a>;

	pinctrl-0 = <&gmac_pins_mii_a>;

	phy = <&phy1>;

	phy-mode = "mii";

	status = "okay";

		};



		ahci: sata@01c18000 {

			target-supply = <&reg_ahci_5v>;

			status = "okay";

	phy1: ethernet-phy@1 {

		reg = <1>;

	};



		ehci1: usb@01c1c000 {

			status = "okay";

};



		ohci1: usb@01c1c400 {

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

		};



		pinctrl@01c20800 {

			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {

				allwinner,pins = "PH11";

				allwinner,function = "gpio_in";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	axp209: pmic@34 {

		compatible = "x-powers,axp209";

		reg = <0x34>;

		interrupt-parent = <&nmi_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



		interrupt-controller;

		#interrupt-cells = <1>;

	};

};



			led_pins_olinuxino: led_pins@0 {

				allwinner,pins = "PH2";

				allwinner,function = "gpio_out";

				allwinner,drive = <SUN4I_PINCTRL_20_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	status = "okay";

};



&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

};



		lradc: lradc@01c22800 {

&lradc {

	vref-supply = <&reg_vcc3v0>;

	status = "okay";
@@ -198,86 +188,94 @@ 
	};

};



		uart0: serial@01c28000 {

&mmc0 {

	pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

	cd-inverted;

	status = "okay";

};



		uart6: serial@01c29800 {

&mmc3 {

	pinctrl-names = "default";

			pinctrl-0 = <&uart6_pins_a>;

	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */

	cd-inverted;

	status = "okay";

};



		uart7: serial@01c29c00 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart7_pins_a>;

&ohci0 {

	status = "okay";

};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

&ohci1 {

	status = "okay";

};



			axp209: pmic@34 {

				compatible = "x-powers,axp209";

				reg = <0x34>;

				interrupt-parent = <&nmi_intc>;

				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

&pio {

	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {

		allwinner,pins = "PH11";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



				interrupt-controller;

				#interrupt-cells = <1>;

	led_pins_olinuxino: led_pins@0 {

		allwinner,pins = "PH2";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_20_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};



		i2c1: i2c@01c2b000 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c1_pins_a>;

&reg_ahci_5v {

	status = "okay";

};



		i2c2: i2c@01c2b400 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c2_pins_a>;

&reg_usb1_vbus {

	status = "okay";

};



		gmac: ethernet@01c50000 {

			pinctrl-names = "default";

			pinctrl-0 = <&gmac_pins_mii_a>;

			phy = <&phy1>;

			phy-mode = "mii";

&reg_usb2_vbus {

	status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};

};



	leds {

		compatible = "gpio-leds";

&spi1 {

	pinctrl-names = "default";

		pinctrl-0 = <&led_pins_olinuxino>;



		green {

			label = "a20-olinuxino-micro:green:usr";

			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;

			default-state = "on";

	pinctrl-0 = <&spi1_pins_a>;

	status = "okay";

};



&spi2 {

	pinctrl-names = "default";

	pinctrl-0 = <&spi2_pins_a>;

	status = "okay";

};



	reg_ahci_5v: ahci-5v {

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



	reg_usb1_vbus: usb1-vbus {

&uart6 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart6_pins_a>;

	status = "okay";

};



	reg_usb2_vbus: usb2-vbus {

&uart7 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart7_pins_a>;

	status = "okay";

};



&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

};