Merge "ARM: dts: msm: Enable ESD check for BOE Panel on Kona" (52821733) · Commits · e / devices / android_kernel_oneplus_sm7250

arch/arm64/boot/dts/qcom/kona-sde-display.dtsi

+18 −0

Original line number	Diff line number	Diff line
		@@ -163,6 +163,12 @@
		/* PHY TIMINGS REVISION W */
		&dsi_sw43404_amoled_cmd {
		qcom,ulps-enabled;
		qcom,esd-check-enabled;
		qcom,mdss-dsi-panel-status-check-mode = "reg_read";
		qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
		qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-panel-status-value = <0x9c>;
		qcom,mdss-dsi-panel-status-read-length = <1>;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-phy-timings = [00 14 05 05 1f 1e 05
		@@ -174,6 +180,12 @@
		};

		&dsi_sw43404_amoled_video {
		qcom,esd-check-enabled;
		qcom,mdss-dsi-panel-status-check-mode = "reg_read";
		qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
		qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-panel-status-value = <0x9c>;
		qcom,mdss-dsi-panel-status-read-length = <1>;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-phy-timings = [00 14 05 05 1f 1e 05
		@@ -186,6 +198,12 @@

		&dsi_sw43404_amoled_fhd_plus_cmd {
		qcom,ulps-enabled;
		qcom,esd-check-enabled;
		qcom,mdss-dsi-panel-status-check-mode = "reg_read";
		qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
		qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-panel-status-value = <0x9c>;
		qcom,mdss-dsi-panel-status-read-length = <1>;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-phy-timings = [00 12 04 04 1e 1e 04