Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5170065d authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus 

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Remove remaining reference to ite_gpio.h from Kbuild
  [MIPS] PNX8550 fixups
parents ab8e8235 c4710e65

arch/mips/Kconfig

+0 −2
Original line number Diff line number Diff line
@@ -440,13 +440,11 @@ config MIPS_XXS1500 


config PNX8550_V2PCI

	bool "Philips PNX8550 based Viper2-PCI board"

	depends on BROKEN

	select PNX8550

	select SYS_SUPPORTS_LITTLE_ENDIAN



config PNX8550_JBS

	bool "Philips PNX8550 based JBS board"

	depends on BROKEN

	select PNX8550

	select SYS_SUPPORTS_LITTLE_ENDIAN

arch/mips/philips/pnx8550/common/int.c

+1 −1
Original line number Diff line number Diff line
@@ -90,7 +90,7 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) 
	unsigned int pending = read_c0_status() & read_c0_cause();



	if (pending & STATUSF_IP2)

		do_IRQ(2, regs);

		hw0_irqdispatch(2, regs);

	else if (pending & STATUSF_IP7) {

		if (read_c0_config7() & 0x01c0)

			timer_irqdispatch(7, regs);

arch/mips/philips/pnx8550/common/platform.c

+6 −10
Original line number Diff line number Diff line
@@ -17,15 +17,13 @@ 
#include <linux/init.h>

#include <linux/resource.h>

#include <linux/serial.h>

#include <linux/serial_ip3106.h>

#include <linux/serial_pnx8xxx.h>

#include <linux/platform_device.h>



#include <int.h>

#include <usb.h>

#include <uart.h>



extern struct uart_ops ip3106_pops;



static struct resource pnx8550_usb_ohci_resources[] = {

	[0] = {

		.start		= PNX8550_USB_OHCI_OP_BASE,
@@ -63,31 +61,29 @@ static struct resource pnx8550_uart_resources[] = { 
	},

};



struct ip3106_port ip3106_ports[] = {

struct pnx8xxx_port pnx8xxx_ports[] = {

	[0] = {

		.port   = {

			.type		= PORT_IP3106,

			.type		= PORT_PNX8XXX,

			.iotype		= UPIO_MEM,

			.membase	= (void __iomem *)PNX8550_UART_PORT0,

			.mapbase	= PNX8550_UART_PORT0,

			.irq		= PNX8550_UART_INT(0),

			.uartclk	= 3692300,

			.fifosize	= 16,

			.ops		= &ip3106_pops,

			.flags		= UPF_BOOT_AUTOCONF,

			.line		= 0,

		},

	},

	[1] = {

		.port   = {

			.type		= PORT_IP3106,

			.type		= PORT_PNX8XXX,

			.iotype		= UPIO_MEM,

			.membase	= (void __iomem *)PNX8550_UART_PORT1,

			.mapbase	= PNX8550_UART_PORT1,

			.irq		= PNX8550_UART_INT(1),

			.uartclk	= 3692300,

			.fifosize	= 16,

			.ops		= &ip3106_pops,

			.flags		= UPF_BOOT_AUTOCONF,

			.line		= 1,

		},
@@ -111,12 +107,12 @@ static struct platform_device pnx8550_usb_ohci_device = { 
};



static struct platform_device pnx8550_uart_device = {

	.name		= "ip3106-uart",

	.name		= "pnx8xxx-uart",

	.id		= -1,

	.dev = {

		.dma_mask		= &uart_dmamask,

		.coherent_dma_mask	= 0xffffffff,

		.platform_data = ip3106_ports,

		.platform_data = pnx8xxx_ports,

	},

	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),

	.resource	= pnx8550_uart_resources,

arch/mips/philips/pnx8550/common/prom.c

+2 −2
Original line number Diff line number Diff line
@@ -13,7 +13,7 @@ 
#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/string.h>

#include <linux/serial_ip3106.h>

#include <linux/serial_pnx8xxx.h>



#include <asm/bootinfo.h>

#include <uart.h>
@@ -126,7 +126,7 @@ void prom_putchar(char c) 
{

	if (pnx8550_console_port != -1) {

		/* Wait until FIFO not full */

		while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)

		while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16)

			;

		/* Send one char */

		ip3106_fifo(UART_BASE, pnx8550_console_port) = c;

arch/mips/philips/pnx8550/common/setup.c

+3 −3
Original line number Diff line number Diff line
@@ -24,7 +24,7 @@ 
#include <linux/mm.h>

#include <linux/delay.h>

#include <linux/interrupt.h>

#include <linux/serial_ip3106.h>

#include <linux/serial_pnx8xxx.h>

#include <linux/pm.h>



#include <asm/cpu.h>
@@ -56,7 +56,7 @@ extern char *prom_getcmdline(void); 


struct resource standard_io_resources[] = {

	{

		.start	= .0x00,

		.start	= 0x00,

		.end	= 0x1f,

		.name	= "dma1",

		.flags	= IORESOURCE_BUSY
@@ -144,7 +144,7 @@ void __init plat_mem_setup(void) 
		/* We must initialize the UART (console) before prom_printf */

		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */

		ip3106_lcr(UART_BASE, pnx8550_console_port) =

			IP3106_UART_LCR_8BIT;

			PNX8XXX_UART_LCR_8BIT;

		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;

	}