dt-bindings: qcom: smb1355: Add bindings

Qualcomm Technologies, Inc. SMB1355 Charger Specific Bindings

SMB1355 slave charger is paired with QTI family of standalone chargers to

enable a high current, low profile Li+ battery charging system.

The device provides 28V DC withstand, wide operating input range of 3.8 to

14.2V for standard 5V USB inputs as well as a wide variety of HVDCP Travel

Adapters and is compatible with QTI's Quick Charge technology.

=======================

Required Node Structure

=======================

SMB1355 Charger must be described in two levels of device nodes.

==================================

First Level Node - SMB1355 Charger

==================================

Charger specific properties:

- compatible

  Usage:      required

  Value type: <string>

  Definition: "qcom,smb1355".

- qcom,pmic-revid

  Usage:      required

  Value type: phandle

  Definition: Should specify the phandle of SMB's revid module. This is used

	      to identify the SMB subtype.

- qcom,disable-ctm

  Usage:      optional

  Value type: <empty>

  Definition: boolean flag. Usually a thermistor near usb/typeC connector is

	      connected to AUX. Set this flag to indicate the thermistor

	      doesn't exist.

- qcom,parallel-mode

  Usage:      optional

  Value type: <u32>

  Definition: Specifies parallel charging mode. If not specified, MID-MID

              option is selected by default.

- qcom,stacked-batfet

  Usage:      optional

  Value type: <empty>

  Definition: boolean flag. Specifies if parallel charger has stacked BATFET

              configuration.

	      In stacked batfet the main and parallel charger's batfet are

	      stacked one after the other and thus all the charge current

	      (FCC) flows through main. In a non-stacked configuration each

	      charger controls the charge current (FCC) separately.

- qcom,die-temp-threshold-degc

  Usage:      optional

  Value type: <u32>

  Definition: Specifies DIE temp threshold beyond which h/w starts mitigation.

	      If not sepcified, 90 degrees centigrade is used.

- qcom,hw-die-temp-mitigation

  Usage:      optional

  Value type: bool

  Definition: Boolean property to enable h/w controlled die temp mitigation.

================================================

Second Level Nodes - SMB1355 Charger Peripherals

================================================

Peripheral specific properties:

- reg

  Usage:      required

  Value type: <prop-encoded-array>

  Definition: Address and size of the peripheral's register block.

- interrupts

  Usage:      required

  Value type: <prop-encoded-array>

  Definition: Peripheral interrupt specifier.

- interrupt-names

  Usage:      required

  Value type: <stringlist>

  Definition: Interrupt names.  This list must match up 1-to-1 with the

	      interrupts specified in the 'interrupts' property.

=======

Example

=======

smb1355_charger: qcom,smb1355-charger {

	compatible = "qcom,smb1355";

	#address-cells = <1>;

	#size-cells = <1>;

	qcom,chgr@1000 {

		reg = <0x1000 0x100>;

		interrupts = <0x10 0x1 IRQ_TYPE_EDGE_BOTH>;

		interrupt-names = "chg-state-change";

	};

	qcom,chgr-misc@1600 {

		reg = <0x1600 0x100>;

		interrupts = <0x16 0x1 IRQ_TYPE_EDGE_BOTH>;

		interrupt-names = "wdog-bark";

	};

};