Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 459caa5c authored by Vandana Jain's avatar Vandana Jain Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: qcom: Fix for multiple failure in camera 

1. Add dma address range in dtsi for each level.
2. Add src-clock-rates as per 4.19 kernel.
3. Temporarily disabled actuator, flash and eeprom.

Change-Id: I9724a44dfd1dfc918d21a631553d56457fecf101
parent 03efe83e

qcom/msm8917-camera.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -376,7 +376,7 @@ 
			"camss_top_ahb_clk", "camss_vfe_cpp_ahb_clk",

			"camss_vfe_cpp_axi_clk", "camss_vfe_cpp_clk",

			"micro_iface_clk", "camss_ahb_clk";

		qcom,src-clock-rates = <61540000 180000000 0 0 0 180000000 0 0>;

		qcom,clock-rates = <61540000 180000000 0 0 0 180000000 0 0>;

		qcom,min-clock-rate = <133000000>;

		resets = <&gcc GCC_CAMSS_MICRO_BCR>;

		reset-names = "micro_iface_reset";

qcom/msm8937-camera.dtsi

+5 −6
Original line number Diff line number Diff line
@@ -306,25 +306,22 @@ 
			compatible = "qcom,msm-cam-smmu-cb";

			iommus = <&apps_iommu 0x400 0x00>,

				<&apps_iommu 0x2400 0x00>;

			qcom,iommu-dma-addr-pool = <0x10000000 0x70000000>;

			label = "vfe";

			qcom,scratch-buf-support;

		};



		msm_cam_smmu_cb2: msm_cam_smmu_cb2 {

			compatible = "qcom,msm-cam-smmu-cb";

			label = "vfe_secure";

			qcom,secure-context;

		};



		msm_cam_smmu_cb3: msm_cam_smmu_cb3 {

			compatible = "qcom,msm-cam-smmu-cb";

			iommus = <&apps_iommu 0x1c00 0x00>;

			qcom,iommu-dma-addr-pool = <0x00020000 0x78000000>;

			label = "cpp";

		};



		msm_cam_smmu_cb4: msm_cam_smmu_cb4 {

			compatible = "qcom,msm-cam-smmu-cb";

			iommus = <&apps_iommu 0x1800 0x00>;

			qcom,iommu-dma-addr-pool = <0x00020000 0x78000000>;

			label = "jpeg_enc0";

		};

	};
@@ -397,6 +394,8 @@ 
			<106 512 0 0>;

		qcom,msm-bus-vector-dyn-vote;

		qcom,micro-reset;

		qcom,src-clock-rates = <133333333 160000000 200000000

			266666667 308570000 320000000 360000000>;

		qcom,cpp-fw-payload-info {

			qcom,stripe-base = <156>;

			qcom,plane-base = <141>;

qcom/qm215-camera.dtsi

+6 −2
Original line number Diff line number Diff line
@@ -300,11 +300,11 @@ 
	qcom,cam_smmu {

		status = "ok";

		compatible = "qcom,msm-cam-smmu";

		qcom,iommu-dma-addr-pool = <0x00020000 0x7FFE0000>;

		msm_cam_smmu_cb1: msm_cam_smmu_cb1 {

			compatible = "qcom,msm-cam-smmu-cb";

			iommus = <&apps_iommu 0x400 0x00>,

				<&apps_iommu 0x2400 0x00>;

			qcom,iommu-dma-addr-pool = <0x10000000 0x70000000>;

			label = "vfe";

			qcom,scratch-buf-support;

		};
@@ -312,12 +312,14 @@ 
		msm_cam_smmu_cb3: msm_cam_smmu_cb3 {

			compatible = "qcom,msm-cam-smmu-cb";

			iommus = <&apps_iommu 0x1c00 0x00>;

			qcom,iommu-dma-addr-pool = <0x00020000 0x78000000>;

			label = "cpp";

		};



		msm_cam_smmu_cb4: msm_cam_smmu_cb4 {

			compatible = "qcom,msm-cam-smmu-cb";

			iommus = <&apps_iommu 0x1800 0x00>;

			qcom,iommu-dma-addr-pool = <0x00020000 0x78000000>;

			label = "jpeg_enc0";

		};

	};
@@ -377,7 +379,7 @@ 
			"camss_top_ahb_clk", "camss_vfe_cpp_ahb_clk",

			"camss_vfe_cpp_axi_clk", "camss_vfe_cpp_clk",

			"micro_iface_clk", "camss_ahb_clk";

		qcom,src-clock-rates = <61540000 180000000 0 0 0 180000000 0 0>;

		qcom,clock-rates = <61540000 180000000 0 0 0 180000000 0 0>;

		qcom,min-clock-rate = <133000000>;

		resets = <&gcc GCC_CAMSS_MICRO_BCR>;

		reset-names = "micro_iface_reset";
@@ -390,6 +392,8 @@ 
			<106 512 0 0>;

		qcom,msm-bus-vector-dyn-vote;

		qcom,micro-reset;

		qcom,src-clock-rates = <133333333 160000000 200000000

			266666667 308570000 320000000 360000000>;

		qcom,cpp-fw-payload-info {

			qcom,stripe-base = <156>;

			qcom,plane-base = <141>;

qcom/sdm439-camera-sensor-mtp.dtsi

+5 −3
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@ 
		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

		status = "disabled";

	};



	actuator1: qcom,actuator@1 {
@@ -27,6 +28,7 @@ 
		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {
@@ -60,7 +62,7 @@ 
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_VANA";

		status = "ok";

		status = "disabled";

		clocks = <&gcc MCLK0_CLK_SRC>,

			<&gcc GCC_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";
@@ -140,7 +142,7 @@ 
			"sensor_cam_mclk";

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;

		status = "ok";

		status = "disabled";

		clocks = <&gcc MCLK2_CLK_SRC>,

			<&gcc GCC_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";
@@ -177,7 +179,7 @@ 
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		status = "ok";

		status = "disabled";

		clocks = <&gcc MCLK2_CLK_SRC>,

				<&gcc GCC_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

qcom/sdm439-camera-sensor-qrd.dtsi

+4 −2
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@ 
		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

		status = "disabled";

	};



	actuator1: qcom,actuator@1 {
@@ -27,6 +28,7 @@ 
		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {
@@ -60,7 +62,7 @@ 
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_VANA";

		status = "ok";

		status = "disabled";

		clocks = <&gcc MCLK0_CLK_SRC>,

			<&gcc GCC_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";
@@ -141,7 +143,7 @@ 
			"sensor_cam_mclk";

		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;

		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;

		status = "ok";

		status = "disabled";

		clocks = <&gcc MCLK2_CLK_SRC>,

			<&gcc GCC_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";