Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 457c25ef authored by Oder Chiou's avatar Oder Chiou Committed by Mark Brown
Browse files

ASoC: rt5663: Add the function of impedance sensing 



Support the function of impedance sensing. It could be set the matrix row
number of the impedance sensing table and the related parameters in the
DTS.

Signed-off-by: default avatarOder Chiou <oder_chiou@realtek.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2bd6bf03

Documentation/devicetree/bindings/sound/rt5663.txt

+16 −0
Original line number Diff line number Diff line
@@ -19,6 +19,22 @@ Optional properties: 
  Based on the different PCB layout, add the manual offset value to

  compensate the DC offset for each L and R channel, and they are different

  between headphone and headset.

- "realtek,impedance_sensing_num"

  The matrix row number of the impedance sensing table.

  If the value is 0, it means the impedance sensing is not supported.

- "realtek,impedance_sensing_table"

  The matrix rows of the impedance sensing table are consisted by impedance

  minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and

  R channel accordingly. Example is shown as following.

  <   0    300  7  0xffd160  0xffd1c0  0xff8a10  0xff8ab0

    301  65535  4  0xffe470  0xffe470  0xffb8e0  0xffb8e0>

  The first and second column are defined for the impedance range. If the

  detected impedance value is in the range, then the volume value of the

  third column will be set to codec. In our codec design, each volume value

  should compensate different DC offset to avoid the pop sound, and it is

  also different between headphone and headset. In the example, the

  "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of

  impedance in the impedance sensing function.



Pins on the device (for linking into audio routes) for RT5663:

include/sound/rt5663.h

+3 −0
Original line number Diff line number Diff line
@@ -16,6 +16,9 @@ struct rt5663_platform_data { 
	unsigned int dc_offset_r_manual;

	unsigned int dc_offset_l_manual_mic;

	unsigned int dc_offset_r_manual_mic;



	unsigned int impedance_sensing_num;

	unsigned int *impedance_sensing_table;

};



#endif

sound/soc/codecs/rt5663.c

+214 −4
Original line number Diff line number Diff line
@@ -38,6 +38,16 @@ enum { 
	CODEC_VER_0,

};



struct impedance_mapping_table {

	unsigned int imp_min;

	unsigned int imp_max;

	unsigned int vol;

	unsigned int dc_offset_l_manual;

	unsigned int dc_offset_r_manual;

	unsigned int dc_offset_l_manual_mic;

	unsigned int dc_offset_r_manual_mic;

};



struct rt5663_priv {

	struct snd_soc_codec *codec;

	struct rt5663_platform_data pdata;
@@ -45,6 +55,7 @@ struct rt5663_priv { 
	struct delayed_work jack_detect_work;

	struct snd_soc_jack *hs_jack;

	struct timer_list btn_check_timer;

	struct impedance_mapping_table *imp_table;



	int codec_ver;

	int sysclk;
@@ -1575,6 +1586,9 @@ static int rt5663_jack_detect(struct snd_soc_codec *codec, int jack_insert) 
			rt5663->jack_type = SND_JACK_HEADSET;

			rt5663_enable_push_button_irq(codec, true);



			if (rt5663->pdata.impedance_sensing_num)

				break;



			if (rt5663->pdata.dc_offset_l_manual_mic) {

				regmap_write(rt5663->regmap, RT5663_MIC_DECRO_2,

					rt5663->pdata.dc_offset_l_manual_mic >>
@@ -1596,6 +1610,9 @@ static int rt5663_jack_detect(struct snd_soc_codec *codec, int jack_insert) 
		default:

			rt5663->jack_type = SND_JACK_HEADPHONE;



			if (rt5663->pdata.impedance_sensing_num)

				break;



			if (rt5663->pdata.dc_offset_l_manual) {

				regmap_write(rt5663->regmap, RT5663_MIC_DECRO_2,

					rt5663->pdata.dc_offset_l_manual >> 16);
@@ -1623,6 +1640,177 @@ static int rt5663_jack_detect(struct snd_soc_codec *codec, int jack_insert) 
	return rt5663->jack_type;

}



static int rt5663_impedance_sensing(struct snd_soc_codec *codec)

{

	struct rt5663_priv *rt5663 = snd_soc_codec_get_drvdata(codec);

	unsigned int value, i, reg84, reg26, reg2fa, reg91, reg10, reg80;



	for (i = 0; i < rt5663->pdata.impedance_sensing_num; i++) {

		if (rt5663->imp_table[i].vol == 7)

			break;

	}



	if (rt5663->jack_type == SND_JACK_HEADSET) {

		snd_soc_write(codec, RT5663_MIC_DECRO_2,

			rt5663->imp_table[i].dc_offset_l_manual_mic >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_3,

			rt5663->imp_table[i].dc_offset_l_manual_mic & 0xffff);

		snd_soc_write(codec, RT5663_MIC_DECRO_5,

			rt5663->imp_table[i].dc_offset_r_manual_mic >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_6,

			rt5663->imp_table[i].dc_offset_r_manual_mic & 0xffff);

	} else {

		snd_soc_write(codec, RT5663_MIC_DECRO_2,

			rt5663->imp_table[i].dc_offset_l_manual >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_3,

			rt5663->imp_table[i].dc_offset_l_manual & 0xffff);

		snd_soc_write(codec, RT5663_MIC_DECRO_5,

			rt5663->imp_table[i].dc_offset_r_manual >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_6,

			rt5663->imp_table[i].dc_offset_r_manual & 0xffff);

	}



	reg84 = snd_soc_read(codec, RT5663_ASRC_2);

	reg26 = snd_soc_read(codec, RT5663_STO1_ADC_MIXER);

	reg2fa = snd_soc_read(codec, RT5663_DUMMY_1);

	reg91 = snd_soc_read(codec, RT5663_HP_CHARGE_PUMP_1);

	reg10 = snd_soc_read(codec, RT5663_RECMIX);

	reg80 = snd_soc_read(codec, RT5663_GLB_CLK);



	snd_soc_update_bits(codec, RT5663_STO_DRE_1, 0x8000, 0);

	snd_soc_write(codec, RT5663_ASRC_2, 0);

	snd_soc_write(codec, RT5663_STO1_ADC_MIXER, 0x4040);

	snd_soc_update_bits(codec, RT5663_PWR_ANLG_1,

		RT5663_PWR_VREF1_MASK | RT5663_PWR_VREF2_MASK |

		RT5663_PWR_FV1_MASK | RT5663_PWR_FV2_MASK,

		RT5663_PWR_VREF1 | RT5663_PWR_VREF2);

	usleep_range(10000, 10005);

	snd_soc_update_bits(codec, RT5663_PWR_ANLG_1,

		RT5663_PWR_FV1_MASK | RT5663_PWR_FV2_MASK,

		RT5663_PWR_FV1 | RT5663_PWR_FV2);

	snd_soc_update_bits(codec, RT5663_GLB_CLK, RT5663_SCLK_SRC_MASK,

		RT5663_SCLK_SRC_RCCLK);

	snd_soc_update_bits(codec, RT5663_RC_CLK, RT5663_DIG_25M_CLK_MASK,

		RT5663_DIG_25M_CLK_EN);

	snd_soc_update_bits(codec, RT5663_ADDA_CLK_1, RT5663_I2S_PD1_MASK, 0);

	snd_soc_write(codec, RT5663_PRE_DIV_GATING_1, 0xff00);

	snd_soc_write(codec, RT5663_PRE_DIV_GATING_2, 0xfffc);

	snd_soc_write(codec, RT5663_HP_CHARGE_PUMP_1, 0x1232);

	snd_soc_write(codec, RT5663_HP_LOGIC_2, 0x0005);

	snd_soc_write(codec, RT5663_DEPOP_2, 0x3003);

	snd_soc_update_bits(codec, RT5663_DEPOP_1, 0x0030, 0x0030);

	snd_soc_update_bits(codec, RT5663_DEPOP_1, 0x0003, 0x0003);

	snd_soc_update_bits(codec, RT5663_PWR_DIG_2,

		RT5663_PWR_ADC_S1F | RT5663_PWR_DAC_S1F,

		RT5663_PWR_ADC_S1F | RT5663_PWR_DAC_S1F);

	snd_soc_update_bits(codec, RT5663_PWR_DIG_1,

		RT5663_PWR_DAC_L1 | RT5663_PWR_DAC_R1 |

		RT5663_PWR_LDO_DACREF_MASK | RT5663_PWR_ADC_L1 |

		RT5663_PWR_ADC_R1,

		RT5663_PWR_DAC_L1 | RT5663_PWR_DAC_R1 |

		RT5663_PWR_LDO_DACREF_ON | RT5663_PWR_ADC_L1 |

		RT5663_PWR_ADC_R1);

	msleep(40);

	snd_soc_update_bits(codec, RT5663_PWR_ANLG_2,

		RT5663_PWR_RECMIX1 | RT5663_PWR_RECMIX2,

		RT5663_PWR_RECMIX1 | RT5663_PWR_RECMIX2);

	msleep(30);

	snd_soc_write(codec, RT5663_HP_CHARGE_PUMP_2, 0x1371);

	snd_soc_write(codec, RT5663_STO_DAC_MIXER, 0);

	snd_soc_write(codec, RT5663_BYPASS_STO_DAC, 0x000c);

	snd_soc_write(codec, RT5663_HP_BIAS, 0xafaa);

	snd_soc_write(codec, RT5663_CHARGE_PUMP_1, 0x2224);

	snd_soc_write(codec, RT5663_HP_OUT_EN, 0x8088);

	snd_soc_write(codec, RT5663_CHOP_ADC, 0x3000);

	snd_soc_write(codec, RT5663_ADDA_RST, 0xc000);

	snd_soc_write(codec, RT5663_STO1_HPF_ADJ1, 0x3320);

	snd_soc_write(codec, RT5663_HP_CALIB_2, 0x00c9);

	snd_soc_write(codec, RT5663_DUMMY_1, 0x004c);

	snd_soc_write(codec, RT5663_ANA_BIAS_CUR_1, 0x7733);

	snd_soc_write(codec, RT5663_CHARGE_PUMP_2, 0x7777);

	snd_soc_write(codec, RT5663_STO_DRE_9, 0x0007);

	snd_soc_write(codec, RT5663_STO_DRE_10, 0x0007);

	snd_soc_write(codec, RT5663_DUMMY_2, 0x02a4);

	snd_soc_write(codec, RT5663_RECMIX, 0x0005);

	snd_soc_write(codec, RT5663_HP_IMP_SEN_1, 0x4334);

	snd_soc_update_bits(codec, RT5663_IRQ_3, 0x0004, 0x0004);

	snd_soc_write(codec, RT5663_HP_LOGIC_1, 0x2200);

	snd_soc_update_bits(codec, RT5663_DEPOP_1, 0x3000, 0x3000);

	snd_soc_write(codec, RT5663_HP_LOGIC_1, 0x6200);



	for (i = 0; i < 100; i++) {

		msleep(20);

		if (snd_soc_read(codec, RT5663_INT_ST_1) & 0x2)

			break;

	}



	value = snd_soc_read(codec, RT5663_HP_IMP_SEN_4);



	snd_soc_update_bits(codec, RT5663_DEPOP_1, 0x3000, 0);

	snd_soc_write(codec, RT5663_INT_ST_1, 0);

	snd_soc_write(codec, RT5663_HP_LOGIC_1, 0);

	snd_soc_update_bits(codec, RT5663_RC_CLK, RT5663_DIG_25M_CLK_MASK,

		RT5663_DIG_25M_CLK_DIS);

	snd_soc_write(codec, RT5663_GLB_CLK, reg80);

	snd_soc_write(codec, RT5663_RECMIX, reg10);

	snd_soc_write(codec, RT5663_DUMMY_2, 0x00a4);

	snd_soc_write(codec, RT5663_DUMMY_1, reg2fa);

	snd_soc_write(codec, RT5663_HP_CALIB_2, 0x00c8);

	snd_soc_write(codec, RT5663_STO1_HPF_ADJ1, 0xb320);

	snd_soc_write(codec, RT5663_ADDA_RST, 0xe400);

	snd_soc_write(codec, RT5663_CHOP_ADC, 0x2000);

	snd_soc_write(codec, RT5663_HP_OUT_EN, 0x0008);

	snd_soc_update_bits(codec, RT5663_PWR_ANLG_2,

		RT5663_PWR_RECMIX1 | RT5663_PWR_RECMIX2, 0);

	snd_soc_update_bits(codec, RT5663_PWR_DIG_1,

		RT5663_PWR_DAC_L1 | RT5663_PWR_DAC_R1 |

		RT5663_PWR_LDO_DACREF_MASK | RT5663_PWR_ADC_L1 |

		RT5663_PWR_ADC_R1, 0);

	snd_soc_update_bits(codec, RT5663_PWR_DIG_2,

		RT5663_PWR_ADC_S1F | RT5663_PWR_DAC_S1F, 0);

	snd_soc_update_bits(codec, RT5663_DEPOP_1, 0x0003, 0);

	snd_soc_update_bits(codec, RT5663_DEPOP_1, 0x0030, 0);

	snd_soc_write(codec, RT5663_HP_LOGIC_2, 0);

	snd_soc_write(codec, RT5663_HP_CHARGE_PUMP_1, reg91);

	snd_soc_update_bits(codec, RT5663_PWR_ANLG_1,

		RT5663_PWR_VREF1_MASK | RT5663_PWR_VREF2_MASK, 0);

	snd_soc_write(codec, RT5663_STO1_ADC_MIXER, reg26);

	snd_soc_write(codec, RT5663_ASRC_2, reg84);



	for (i = 0; i < rt5663->pdata.impedance_sensing_num; i++) {

		if (value >= rt5663->imp_table[i].imp_min &&

			value <= rt5663->imp_table[i].imp_max)

			break;

	}



	snd_soc_update_bits(codec, RT5663_STO_DRE_9, RT5663_DRE_GAIN_HP_MASK,

		rt5663->imp_table[i].vol);

	snd_soc_update_bits(codec, RT5663_STO_DRE_10, RT5663_DRE_GAIN_HP_MASK,

		rt5663->imp_table[i].vol);



	if (rt5663->jack_type == SND_JACK_HEADSET) {

		snd_soc_write(codec, RT5663_MIC_DECRO_2,

			rt5663->imp_table[i].dc_offset_l_manual_mic >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_3,

			rt5663->imp_table[i].dc_offset_l_manual_mic & 0xffff);

		snd_soc_write(codec, RT5663_MIC_DECRO_5,

			rt5663->imp_table[i].dc_offset_r_manual_mic >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_6,

			rt5663->imp_table[i].dc_offset_r_manual_mic & 0xffff);

	} else {

		snd_soc_write(codec, RT5663_MIC_DECRO_2,

			rt5663->imp_table[i].dc_offset_l_manual >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_3,

			rt5663->imp_table[i].dc_offset_l_manual & 0xffff);

		snd_soc_write(codec, RT5663_MIC_DECRO_5,

			rt5663->imp_table[i].dc_offset_r_manual >> 16);

		snd_soc_write(codec, RT5663_MIC_DECRO_6,

			rt5663->imp_table[i].dc_offset_r_manual & 0xffff);

	}



	return 0;

}



static int rt5663_button_detect(struct snd_soc_codec *codec)

{

	int btn_type, val;
@@ -1701,6 +1889,8 @@ static void rt5663_jack_detect_work(struct work_struct *work) 
				break;

			case CODEC_VER_0:

				report = rt5663_jack_detect(rt5663->codec, 1);

				if (rt5663->pdata.impedance_sensing_num)

					rt5663_impedance_sensing(rt5663->codec);

				break;

			default:

				dev_err(codec->dev, "Unknown CODEC Version\n");
@@ -1796,10 +1986,6 @@ static const struct snd_kcontrol_new rt5663_v2_specific_controls[] = { 
};



static const struct snd_kcontrol_new rt5663_specific_controls[] = {

	/* Headphone Output Volume */

	SOC_DOUBLE_R_TLV("Headphone Playback Volume", RT5663_STO_DRE_9,

		RT5663_STO_DRE_10, RT5663_DRE_GAIN_HP_SHIFT, 23, 1,

		rt5663_hp_vol_tlv),

	/* Mic Boost Volume*/

	SOC_SINGLE_TLV("IN1 Capture Volume", RT5663_CBJ_2,

		RT5663_GAIN_BST1_SHIFT, 8, 0, in_bst_tlv),
@@ -1807,6 +1993,13 @@ static const struct snd_kcontrol_new rt5663_specific_controls[] = { 
	SOC_ENUM("IF1 ADC Data Swap", rt5663_if1_adc_enum),

};



static const struct snd_kcontrol_new rt5663_hpvol_controls[] = {

	/* Headphone Output Volume */

	SOC_DOUBLE_R_TLV("Headphone Playback Volume", RT5663_STO_DRE_9,

		RT5663_STO_DRE_10, RT5663_DRE_GAIN_HP_SHIFT, 23, 1,

		rt5663_hp_vol_tlv),

};



static int rt5663_is_sys_clk_from_pll(struct snd_soc_dapm_widget *w,

	struct snd_soc_dapm_widget *sink)

{
@@ -2889,6 +3082,10 @@ static int rt5663_probe(struct snd_soc_codec *codec) 
			ARRAY_SIZE(rt5663_specific_dapm_routes));

		snd_soc_add_codec_controls(codec, rt5663_specific_controls,

			ARRAY_SIZE(rt5663_specific_controls));



		if (!rt5663->imp_table)

			snd_soc_add_codec_controls(codec, rt5663_hpvol_controls,

				ARRAY_SIZE(rt5663_hpvol_controls));

		break;

	}
@@ -3177,6 +3374,8 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663) 


static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)

{

	int table_size;



	device_property_read_u32(dev, "realtek,dc_offset_l_manual",

		&rt5663->pdata.dc_offset_l_manual);

	device_property_read_u32(dev, "realtek,dc_offset_r_manual",
@@ -3185,6 +3384,17 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev) 
		&rt5663->pdata.dc_offset_l_manual_mic);

	device_property_read_u32(dev, "realtek,dc_offset_r_manual_mic",

		&rt5663->pdata.dc_offset_r_manual_mic);

	device_property_read_u32(dev, "realtek,impedance_sensing_num",

		&rt5663->pdata.impedance_sensing_num);



	if (rt5663->pdata.impedance_sensing_num) {

		table_size = sizeof(struct impedance_mapping_table) *

			rt5663->pdata.impedance_sensing_num;

		rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL);

		device_property_read_u32_array(dev,

			"realtek,impedance_sensing_table",

			(u32 *)rt5663->imp_table, table_size);

	}



	return 0;

}