[PATCH] ppc64: SMU based macs cpufreq support (4350147a) · Commits · e / devices / android_kernel_oneplus_sm7250

arch/powerpc/Kconfig

+8 −0

Original line number	Diff line number	Diff line
		@@ -404,6 +404,14 @@ config CPU_FREQ_PMAC
		this currently includes some models of iBook & Titanium
		PowerBook.

		config CPU_FREQ_PMAC64
		bool "Support for some Apple G5s"
		depends on CPU_FREQ && PMAC_SMU && PPC64
		select CPU_FREQ_TABLE
		help
		This adds support for frequency switching on Apple iMac G5,
		and some of the more recent desktop G5 machines as well.

		config PPC601_SYNC_FIX
		bool "Workarounds for PPC601 bugs"
		depends on 6xx && (PPC_PREP \|\| PPC_PMAC)

arch/powerpc/kernel/misc_64.S

+70 −0

Original line number	Diff line number	Diff line
		@@ -603,6 +603,76 @@ _GLOBAL(real_writeb)
		blr
		#endif /* defined(CONFIG_PPC_PMAC) \|\| defined(CONFIG_PPC_MAPLE) */

		/*
		* SCOM access functions for 970 (FX only for now)
		*
		* unsigned long scom970_read(unsigned int address);
		* void scom970_write(unsigned int address, unsigned long value);
		*
		* The address passed in is the 24 bits register address. This code
		* is 970 specific and will not check the status bits, so you should
		* know what you are doing.
		*/
		_GLOBAL(scom970_read)
		/* interrupts off */
		mfmsr r4
		ori r0,r4,MSR_EE
		xori r0,r0,MSR_EE
		mtmsrd r0,1

		/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
		* (including parity). On current CPUs they must be 0'd,
		* and finally or in RW bit
		*/
		rlwinm r3,r3,8,0,15
		ori r3,r3,0x8000

		/* do the actual scom read */
		sync
		mtspr SPRN_SCOMC,r3
		isync
		mfspr r3,SPRN_SCOMD
		isync
		mfspr r0,SPRN_SCOMC
		isync

		/* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
		* that's the best we can do). Not implemented yet as we don't use
		* the scom on any of the bogus CPUs yet, but may have to be done
		* ultimately
		*/

		/* restore interrupts */
		mtmsrd r4,1
		blr


		_GLOBAL(scom970_write)
		/* interrupts off */
		mfmsr r5
		ori r0,r5,MSR_EE
		xori r0,r0,MSR_EE
		mtmsrd r0,1

		/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
		* (including parity). On current CPUs they must be 0'd.
		*/

		rlwinm r3,r3,8,0,15

		sync
		mtspr SPRN_SCOMD,r4 /* write data */
		isync
		mtspr SPRN_SCOMC,r3 /* write command */
		isync
		mfspr 3,SPRN_SCOMC
		isync

		/* restore interrupts */
		mtmsrd r5,1
		blr


		/*
		* Create a kernel thread
		* kernel_thread(fn, arg, flags)

arch/powerpc/platforms/powermac/Makefile

+2 −1

Original line number	Diff line number	Diff line
		obj-y += pic.o setup.o time.o feature.o pci.o \
		sleep.o low_i2c.o cache.o
		obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o
		obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o
		obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o
		obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o
		obj-$(CONFIG_NVRAM) += nvram.o
		# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
		obj-$(CONFIG_PPC64) += nvram.o

arch/powerpc/platforms/powermac/cpufreq.c→arch/powerpc/platforms/powermac/cpufreq_32.c

+9 −8

Original line number	Diff line number	Diff line
		@@ -397,18 +397,16 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy,
		unsigned int relation)
		{
		unsigned int newstate = 0;
		int rc;

		if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
		target_freq, relation, &newstate))
		return -EINVAL;

		return do_set_cpu_speed(newstate, 1);
		}
		rc = do_set_cpu_speed(newstate, 1);

		unsigned int pmac_get_one_cpufreq(int i)
		{
		/* Supports only one CPU for now */
		return (i == 0) ? cur_freq : 0;
		ppc_proc_freq = cur_freq * 1000ul;
		return rc;
		}

		static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
		@@ -464,7 +462,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
		/* If we resume, first check if we have a get() function */
		if (get_speed_proc)
		cur_freq = get_speed_proc();
		else
		else)
		cur_freq = 0;

		/* We don't, hrm... we don't really know our speed here, best
		@@ -474,6 +472,8 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
		do_set_cpu_speed(sleep_freq == low_freq ?
		CPUFREQ_LOW : CPUFREQ_HIGH, 0);

		ppc_proc_freq = cur_freq * 1000ul;

		no_schedule = 0;
		return 0;
		}
		@@ -714,6 +714,7 @@ static int __init pmac_cpufreq_setup(void)

		pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
		pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
		ppc_proc_freq = cur_freq * 1000ul;

		printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
		printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",

arch/powerpc/platforms/powermac/cpufreq_64.c

0 → 100644

+323 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
		* and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 as
		* published by the Free Software Foundation.
		*
		* This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
		* that is iMac G5 and latest single CPU desktop.
		*/

		#include <linux/config.h>
		#include <linux/module.h>
		#include <linux/types.h>
		#include <linux/errno.h>
		#include <linux/kernel.h>
		#include <linux/delay.h>
		#include <linux/sched.h>
		#include <linux/slab.h>
		#include <linux/cpufreq.h>
		#include <linux/init.h>
		#include <linux/completion.h>
		#include <asm/prom.h>
		#include <asm/machdep.h>
		#include <asm/irq.h>
		#include <asm/sections.h>
		#include <asm/cputable.h>
		#include <asm/time.h>
		#include <asm/smu.h>

		#undef DEBUG

		#ifdef DEBUG
		#define DBG(fmt...) printk(fmt)
		#else
		#define DBG(fmt...)
		#endif

		/* see 970FX user manual */

		#define SCOM_PCR 0x0aa001 /* PCR scom addr */

		#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
		#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
		#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
		#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
		#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
		#define PCR_SPEED_SHIFT 17
		#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
		#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
		#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
		#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
		#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
		#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */

		#define SCOM_PSR 0x408001 /* PSR scom addr */
		/* warning: PSR is a 64 bits register */
		#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
		#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
		#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
		#define PSR_CUR_SPEED_SHIFT (56)

		/*
		* The G5 only supports two frequencies (Quarter speed is not supported)
		*/
		#define CPUFREQ_HIGH 0
		#define CPUFREQ_LOW 1

		static struct cpufreq_frequency_table g5_cpu_freqs[] = {
		{CPUFREQ_HIGH, 0},
		{CPUFREQ_LOW, 0},
		{0, CPUFREQ_TABLE_END},
		};

		static struct freq_attr* g5_cpu_freqs_attr[] = {
		&cpufreq_freq_attr_scaling_available_freqs,
		NULL,
		};

		/* Power mode data is an array of the 32 bits PCR values to use for
		* the various frequencies, retreived from the device-tree
		*/
		static u32 *g5_pmode_data;
		static int g5_pmode_max;
		static int g5_pmode_cur;

		static DECLARE_MUTEX(g5_switch_mutex);


		static struct smu_sdbp_fvt g5_fvt_table; / table of op. points */
		static int g5_fvt_count; /* number of op. points */
		static int g5_fvt_cur; /* current op. point */

		/* ----------------- real hardware interface */

		static void g5_switch_volt(int speed_mode)
		{
		struct smu_simple_cmd cmd;

		DECLARE_COMPLETION(comp);
		smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
		&comp, 'V', 'S', 'L', 'E', 'W',
		0xff, g5_fvt_cur+1, speed_mode);
		wait_for_completion(&comp);
		}

		static int g5_switch_freq(int speed_mode)
		{
		struct cpufreq_freqs freqs;
		int to;

		if (g5_pmode_cur == speed_mode)
		return 0;

		down(&g5_switch_mutex);

		freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
		freqs.new = g5_cpu_freqs[speed_mode].frequency;
		freqs.cpu = 0;

		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

		/* If frequency is going up, first ramp up the voltage */
		if (speed_mode < g5_pmode_cur)
		g5_switch_volt(speed_mode);

		/* Clear PCR high */
		scom970_write(SCOM_PCR, 0);
		/* Clear PCR low */
		scom970_write(SCOM_PCR, PCR_HILO_SELECT \| 0);
		/* Set PCR low */
		scom970_write(SCOM_PCR, PCR_HILO_SELECT \|
		g5_pmode_data[speed_mode]);

		/* Wait for completion */
		for (to = 0; to < 10; to++) {
		unsigned long psr = scom970_read(SCOM_PSR);

		if ((psr & PSR_CMD_RECEIVED) == 0 &&
		(((psr >> PSR_CUR_SPEED_SHIFT) ^
		(g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
		== 0)
		break;
		if (psr & PSR_CMD_COMPLETED)
		break;
		udelay(100);
		}

		/* If frequency is going down, last ramp the voltage */
		if (speed_mode > g5_pmode_cur)
		g5_switch_volt(speed_mode);

		g5_pmode_cur = speed_mode;
		ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;

		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

		up(&g5_switch_mutex);

		return 0;
		}

		static int g5_query_freq(void)
		{
		unsigned long psr = scom970_read(SCOM_PSR);
		int i;

		for (i = 0; i <= g5_pmode_max; i++)
		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
		(g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
		break;
		return i;
		}

		/* ----------------- cpufreq bookkeeping */

		static int g5_cpufreq_verify(struct cpufreq_policy *policy)
		{
		return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
		}

		static int g5_cpufreq_target(struct cpufreq_policy *policy,
		unsigned int target_freq, unsigned int relation)
		{
		unsigned int newstate = 0;

		if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
		target_freq, relation, &newstate))
		return -EINVAL;

		return g5_switch_freq(newstate);
		}

		static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
		{
		return g5_cpu_freqs[g5_pmode_cur].frequency;
		}

		static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
		{
		if (policy->cpu != 0)
		return -ENODEV;

		policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
		policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
		policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
		cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);

		return cpufreq_frequency_table_cpuinfo(policy,
		g5_cpu_freqs);
		}


		static struct cpufreq_driver g5_cpufreq_driver = {
		.name = "powermac",
		.owner = THIS_MODULE,
		.flags = CPUFREQ_CONST_LOOPS,
		.init = g5_cpufreq_cpu_init,
		.verify = g5_cpufreq_verify,
		.target = g5_cpufreq_target,
		.get = g5_cpufreq_get_speed,
		.attr = g5_cpu_freqs_attr,
		};


		static int __init g5_cpufreq_init(void)
		{
		struct device_node *cpunode;
		unsigned int psize, ssize;
		struct smu_sdbp_header *shdr;
		unsigned long max_freq;
		u32 *valp;
		int rc = -ENODEV;

		/* Look for CPU and SMU nodes */
		cpunode = of_find_node_by_type(NULL, "cpu");
		if (!cpunode) {
		DBG("No CPU node !\n");
		return -ENODEV;
		}

		/* Check 970FX for now */
		valp = (u32 *)get_property(cpunode, "cpu-version", NULL);
		if (!valp) {
		DBG("No cpu-version property !\n");
		goto bail_noprops;
		}
		if (((*valp) >> 16) != 0x3c) {
		DBG("Wrong CPU version: %08x\n", *valp);
		goto bail_noprops;
		}

		/* Look for the powertune data in the device-tree */
		g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize);
		if (!g5_pmode_data) {
		DBG("No power-mode-data !\n");
		goto bail_noprops;
		}
		g5_pmode_max = psize / sizeof(u32) - 1;

		/* Look for the FVT table */
		shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
		if (!shdr)
		goto bail_noprops;
		g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
		ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header);
		g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
		g5_fvt_cur = 0;

		/* Sanity checking */
		if (g5_fvt_count < 1 \|\| g5_pmode_max < 1)
		goto bail_noprops;

		/*
		* From what I see, clock-frequency is always the maximal frequency.
		* The current driver can not slew sysclk yet, so we really only deal
		* with powertune steps for now. We also only implement full freq and
		* half freq in this version. So far, I haven't yet seen a machine
		* supporting anything else.
		*/
		valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
		if (!valp)
		return -ENODEV;
		max_freq = (*valp)/1000;
		g5_cpu_freqs[0].frequency = max_freq;
		g5_cpu_freqs[1].frequency = max_freq/2;

		/* Check current frequency */
		g5_pmode_cur = g5_query_freq();
		if (g5_pmode_cur > 1)
		/* We don't support anything but 1:1 and 1:2, fixup ... */
		g5_pmode_cur = 1;

		/* Force apply current frequency to make sure everything is in
		* sync (voltage is right for example). Firmware may leave us with
		* a strange setting ...
		*/
		g5_switch_freq(g5_pmode_cur);

		printk(KERN_INFO "Registering G5 CPU frequency driver\n");
		printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
		g5_cpu_freqs[1].frequency/1000,
		g5_cpu_freqs[0].frequency/1000,
		g5_cpu_freqs[g5_pmode_cur].frequency/1000);

		rc = cpufreq_register_driver(&g5_cpufreq_driver);

		/* We keep the CPU node on hold... hopefully, Apple G5 don't have
		* hotplug CPU with a dynamic device-tree ...
		*/
		return rc;

		bail_noprops:
		of_node_put(cpunode);

		return rc;
		}

		module_init(g5_cpufreq_init);


		MODULE_LICENSE("GPL");