Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3e7d83bc authored by Michael Chan's avatar Michael Chan Committed by David S. Miller
Browse files

[TG3]: Add GPIO3 for 5752 



Add bit definitions for the new GPIO3 in 5752. GPIO3 must be driven as
output when it is unused.

Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ff645bec

drivers/net/tg3.c

+10 −0
Original line number Diff line number Diff line
@@ -5353,6 +5353,11 @@ static int tg3_reset_hw(struct tg3 *tp) 


		gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE2 |

			    GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT2;



		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)

			gpio_mask |= GRC_LCLCTRL_GPIO_OE3 |

				     GRC_LCLCTRL_GPIO_OUTPUT3;



		tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;



		/* GPIO1 must be driven high for eeprom write protect */
@@ -8077,6 +8082,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) 
	    (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))

		tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |

				       GRC_LCLCTRL_GPIO_OUTPUT1);

	/* Unused GPIO3 must be driven as output on 5752 because there

	 * are no pull-up resistors on unused GPIO pins.

	 */

	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)

		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;



	/* Force the chip into D0. */

	err = tg3_set_power_state(tp, 0);

drivers/net/tg3.h

+3 −0
Original line number Diff line number Diff line
@@ -1311,6 +1311,9 @@ 
#define  GRC_LCLCTRL_CLEARINT		0x00000002

#define  GRC_LCLCTRL_SETINT		0x00000004

#define  GRC_LCLCTRL_INT_ON_ATTN	0x00000008

#define  GRC_LCLCTRL_GPIO_INPUT3	0x00000020

#define  GRC_LCLCTRL_GPIO_OE3		0x00000040

#define  GRC_LCLCTRL_GPIO_OUTPUT3	0x00000080

#define  GRC_LCLCTRL_GPIO_INPUT0	0x00000100

#define  GRC_LCLCTRL_GPIO_INPUT1	0x00000200

#define  GRC_LCLCTRL_GPIO_INPUT2	0x00000400