ARM: dts: msm: bengal bring up audio changes (3de3bd80) · Commits · e / devices / android_kernel_oneplus_sm7250

qcom/bengal-audio-overlay.dtsi

+19 −19

Original line number	Diff line number	Diff line
		@@ -85,7 +85,7 @@
		clock-names = "lpass_audio_hw_vote";
		clocks = <&lpass_audio_hw_vote 0>;
		qcom,swr_master_id = <3>;
		qcom,swrm-hctl-reg = <0x0a7ec0f0>;
		qcom,swrm-hctl-reg = <0x0a7ec100>;
		qcom,mipi-sdw-block-packing-mode = <1>;
		swrm-io-base = <0xa740000 0x0>;
		interrupts =
		@@ -167,14 +167,14 @@
		"MIC BIAS3", "Analog Mic3",
		"AMIC4", "MIC BIAS3",
		"MIC BIAS3", "Analog Mic4",
		"TX DMIC0", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic0",
		"TX DMIC1", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic1",
		"TX DMIC2", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic2",
		"TX DMIC3", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic3",
		"TX DMIC0", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic0",
		"TX DMIC1", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic1",
		"TX DMIC2", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic2",
		"TX DMIC3", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic3",
		"IN1_HPHL", "HPHL_OUT",
		"IN2_HPHR", "HPHR_OUT",
		"IN3_AUX", "AUX_OUT",
		@@ -207,14 +207,14 @@
		"TX_AIF1 CAP", "VA_TX_SWR_CLK",
		"TX_AIF2 CAP", "VA_TX_SWR_CLK",
		"TX_AIF3 CAP", "VA_TX_SWR_CLK",
		"VA DMIC0", "VA MIC BIAS3",
		"VA DMIC1", "VA MIC BIAS3",
		"VA DMIC2", "VA MIC BIAS1",
		"VA DMIC3", "VA MIC BIAS1",
		"VA MIC BIAS3", "Digital Mic0",
		"VA MIC BIAS3", "Digital Mic1",
		"VA MIC BIAS1", "Digital Mic2",
		"VA MIC BIAS1", "Digital Mic3",
		"VA DMIC0", "VA MIC BIAS1",
		"VA DMIC1", "VA MIC BIAS1",
		"VA DMIC2", "VA MIC BIAS3",
		"VA DMIC3", "VA MIC BIAS3",
		"VA MIC BIAS1", "Digital Mic0",
		"VA MIC BIAS1", "Digital Mic1",
		"VA MIC BIAS3", "Digital Mic2",
		"VA MIC BIAS3", "Digital Mic3",
		"VA SWR_MIC0", "ADC1_OUTPUT",
		"VA SWR_MIC4", "ADC2_OUTPUT",
		"VA SWR_MIC5", "ADC3_OUTPUT",
		@@ -286,9 +286,9 @@
		compatible = "qcom,msm-cdc-pinctrl";
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&tx_swr_clk_active &tx_swr_data1_active
		&tx_swr_data2_active &tx_swr_data3_active>;
		&tx_swr_data2_active>;
		pinctrl-1 = <&tx_swr_clk_sleep &tx_swr_data1_sleep
		&tx_swr_data2_sleep &tx_swr_data3_sleep>;
		&tx_swr_data2_sleep>;
		qcom,lpi-gpios;
		qcom,chip-wakeup-reg = <0x003ca04c>;
		qcom,chip-wakeup-maskbit = <0>;

qcom/bengal-lpi.dtsi

+0 −28

Original line number	Diff line number	Diff line
		@@ -1734,34 +1734,6 @@
		};
		};

		tx_swr_data3_sleep: tx_swr_data3_sleep {
		mux {
		pins = "gpio18";
		function = "func2";
		};

		config {
		pins = "gpio18";
		drive-strength = <10>;
		input-enable;
		bias-pull-down;
		};
		};

		tx_swr_data3_active: tx_swr_data3_active {
		mux {
		pins = "gpio18";
		function = "func2";
		};

		config {
		pins = "gpio18";
		drive-strength = <10>;
		slew-rate = <3>;
		bias-bus-hold;
		};
		};

		rx_swr_clk_sleep: rx_swr_clk_sleep {
		mux {
		pins = "gpio3";