Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3bf0a419 authored by Linus Walleij's avatar Linus Walleij
Browse files

ARM: pb1176: add ethernet to devicetree 



The PB1176 device tree was missing the SMSC9118 ethernet adapter,
so add it. Since this peripheral is not in either development
chip but on the board itself, it gets defined in the root node
of the device tree.

Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent cc9ab84c

arch/arm/boot/dts/arm-realview-pb1176.dts

+22 −0
Original line number Diff line number Diff line
@@ -53,6 +53,14 @@ 
		regulator-boot-on;

        };



	veth: fixedregulator@0 {

		compatible = "regulator-fixed";

		regulator-name = "veth";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-boot-on;

	};



	xtal24mhz: xtal24mhz@24M {

		#clock-cells = <0>;

		compatible = "fixed-clock";
@@ -131,6 +139,20 @@ 
		status = "disabled";

	};



	/* SMSC 9118 ethernet with PHY and EEPROM */

	ethernet@3a000000 {

		compatible = "smsc,lan9118", "smsc,lan9115";

		reg = <0x3a000000 0x10000>;

		interrupt-parent = <&intc_fpga1176>;

		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;

		phy-mode = "mii";

		reg-io-width = <4>;

		smsc,irq-active-high;

		smsc,irq-push-pull;

		vdd33a-supply = <&veth>;

		vddvario-supply = <&veth>;

	};



	usb@3b000000 {

		compatible = "nxp,usb-isp1761";

		reg = <0x3b000000 0x20000>;