Merge "ARM: dts: msm: Add initial device tree for khaje QRD" (385d4b8c) · Commits · e / devices / android_kernel_oneplus_sm7250

bindings/arm/msm/msm.txt

+1 −0

Original line number	Diff line number	Diff line
		@@ -251,6 +251,7 @@ compatible = "qcom,bengal-idp"
		compatible = "qcom,bengalp"
		compatible = "qcom,bengalp-idp"
		compatible = "qcom,khaje-idp"
		compatible = "qcom,khaje-qrd"
		compatible = "qcom,scuba-rumi"
		compatible = "qcom,scuba-idp"
		compatible = "qcom,scuba-qrd"

qcom/Makefile

+3 −0

Original line number	Diff line number	Diff line
		@@ -231,12 +231,15 @@ endif
		ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)
		dtbo-$(CONFIG_ARCH_KHAJE) += \
		khaje-idp-overlay.dtbo \
		khaje-qrd-overlay.dtbo \
		khaje-idp-nopmi-overlay.dtbo

		khaje-idp-overlay.dtbo-base := khaje.dtb
		khaje-qrd-overlay.dtbo-base := khaje.dtb
		khaje-idp-nopmi-overlay.dtbo-base := khaje.dtb
		else
		dtb-$(CONFIG_ARCH_KHAJE) += khaje-idp.dtb \
		khaje-qrd.dtb \
		khaje-idp-nopmi.dtb
		endif

qcom/bengal-qrd-nopmi.dtsi

0 → 100644

+24 −0

Original line number	Diff line number	Diff line
		#include "bengal-qrd.dtsi"

		&led_flash_rear {
		/delete-property/ flash-source;
		/delete-property/ torch-source;
		/delete-property/ switch-source;
		};

		&led_flash_rear_aux {
		/delete-property/ flash-source;
		/delete-property/ torch-source;
		/delete-property/ switch-source;
		};

		&led_flash_rear_aux2 {
		/delete-property/ flash-source;
		/delete-property/ torch-source;
		/delete-property/ switch-source;
		};

		&sde_dsi {
		/delete-property/ lab-supply;
		/delete-property/ ibb-supply;
		};

qcom/bengal-qrd-overlay.dts

+2 −1

Original line number	Diff line number	Diff line
		/dts-v1/;
		/plugin/;

		#include "bengal-pmi632.dtsi"
		#include "bengal-qrd.dtsi"
		#include "bengal-qrd-pmi632.dtsi"
		#include "bengal-thermal-pmi632-overlay.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. Bengal QRD";

qcom/bengal-qrd-pmi632.dtsi

0 → 100644

+94 −0

Original line number	Diff line number	Diff line
		#include "bengal-pmi632.dtsi"

		&soc {
		qrd_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "qg-batterydata-atl466271_3300mAh.dtsi"
		};
		};

		&pmi632_qg {
		qcom,battery-data = <&qrd_batterydata>;
		qcom,qg-iterm-ma = <100>;
		qcom,hold-soc-while-full;
		qcom,linearize-soc;
		qcom,qg-use-s7-ocv;
		};

		&pmi632_charger {
		qcom,battery-data = <&qrd_batterydata>;
		qcom,suspend-input-on-debug-batt;
		qcom,sw-jeita-enable;
		qcom,step-charging-enable;
		/* SMB1355 only */
		qcom,sec-charger-config = <2>;
		qcom,hvdcp2-max-icl-ua = <2000000>;
		dpdm-supply = <&qusb_phy0>;
		qcom,charger-temp-max = <800>;
		qcom,smb-temp-max = <800>;
		qcom,auto-recharge-soc = <98>;
		qcom,flash-disable-soc = <10>;
		qcom,hw-die-temp-mitigation;
		qcom,hw-connector-mitigation;
		qcom,connector-internal-pull-kohm = <100>;
		qcom,float-option = <1>;
		qcom,thermal-mitigation = <4200000 3500000 3000000
		2500000 2000000 1500000 1000000 500000>;
		};

		&pmi632_gpios {
		smb_en {
		smb_en_default: smb_en_default {
		pins = "gpio2";
		function = "func1";
		output-enable;
		};
		};

		pmi632_sense {
		/* GPIO 7 and 8 are external-sense pins for PMI632 */
		pmi632_sense_default: pmi632_sense_default {
		pins = "gpio7", "gpio8";
		bias-high-impedance; /* disable the GPIO */
		bias-disable; /* no-pull */
		};
		};

		pmi632_ctm {
		/* Disable GPIO1 for h/w base mitigation */
		pmi632_ctm_default: pmi632_ctm_default {
		pins = "gpio1";
		bias-high-impedance; /* disable the GPIO */
		bias-disable; /* no-pull */
		};
		};
		};

		&usb0 {
		extcon = <&pmi632_charger>, <&eud>;
		};

		&smb1355 {
		pinctrl-names = "default";
		pinctrl-0 = <&smb_int_default>;
		interrupt-parent = <&tlmm>;
		interrupts = <105 IRQ_TYPE_LEVEL_LOW>;
		status = "ok";
		};

		&smb1355_charger {
		pinctrl-names = "default";
		pinctrl-0 = <&smb_en_default &pmi632_sense_default &pmi632_ctm_default>;
		qcom,parallel-mode = <1>;
		qcom,disable-ctm;
		qcom,hw-die-temp-mitigation;
		status = "ok";
		};

		&dsi_td4330_truly_v2_video {
		qcom,platform-bklight-en-gpio = <&pmi632_gpios 6 0>;
		};

		&dsi_td4330_truly_v2_cmd {
		qcom,platform-bklight-en-gpio = <&pmi632_gpios 6 0>;
		};