Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1e349600 authored by Keerthy's avatar Keerthy Committed by Lee Jones
Browse files

mfd: Add LP87565 PMIC support 



The LP87565 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

        - Configurable Bucks(Single and multi-phase).
        - Configurable General Purpose Output Signals (GPO).

The LP87565-Q1 variant device uses two 2-phase outputs configuration,
Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3
output.

Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent f58b14e6

Documentation/devicetree/bindings/mfd/lp87565.txt

0 → 100644
+43 −0
Original line number Diff line number Diff line 
TI LP87565 PMIC MFD driver



Required properties:

  - compatible:	"ti,lp87565", "ti,lp87565-q1"

  - reg:		I2C slave address.

  - gpio-controller:	Marks the device node as a GPIO Controller.

  - #gpio-cells:	Should be two.  The first cell is the pin number and

			the second cell is used to specify flags.

			See ../gpio/gpio.txt for more information.

  - xxx-in-supply:	Phandle to parent supply node of each regulator

			populated under regulators node. xxx should match

			the supply_name populated in driver.

Example:



lp87565_pmic: pmic@60 {

	compatible = "ti,lp87565-q1";

	reg = <0x60>;

	gpio-controller;

	#gpio-cells = <2>;



	buck10-in-supply = <&vsys_3v3>;

	buck23-in-supply = <&vsys_3v3>;



	regulators: regulators {

		buck10_reg: buck10 {

			/* VDD_MPU */

			regulator-name = "buck10";

			regulator-min-microvolt = <850000>;

			regulator-max-microvolt = <1250000>;

			regulator-always-on;

			regulator-boot-on;

		};



		buck23_reg: buck23 {

			/* VDD_GPU */

			regulator-name = "buck23";

			regulator-min-microvolt = <850000>;

			regulator-max-microvolt = <1250000>;

			regulator-boot-on;

			regulator-always-on;

		};

	};

};

drivers/mfd/Kconfig

+14 −0
Original line number Diff line number Diff line
@@ -1351,6 +1351,20 @@ config MFD_TI_LP873X 
	  This driver can also be built as a module. If so, the module

	  will be called lp873x.



config MFD_TI_LP87565

	tristate "TI LP87565 Power Management IC"

	depends on I2C && OF

	select MFD_CORE

	select REGMAP_I2C

	help

	  If you say yes here then you get support for the LP87565 series of

	  Power Management Integrated Circuits (PMIC).

	  These include voltage regulators, thermal protection, configurable

	  General Purpose Outputs (GPO) that are used in portable devices.



	  This driver can also be built as a module. If so, the module

	  will be called lp87565.



config MFD_TPS65218

	tristate "TI TPS65218 Power Management chips"

	depends on I2C

drivers/mfd/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -25,6 +25,7 @@ obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o 
obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o



obj-$(CONFIG_MFD_TI_LP873X)	+= lp873x.o

obj-$(CONFIG_MFD_TI_LP87565)	+= lp87565.o



obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o

obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o

drivers/mfd/lp87565.c

0 → 100644
+100 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/

 *

 * Author: Keerthy <j-keerthy@ti.com>

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation version 2.

 */



#include <linux/interrupt.h>

#include <linux/mfd/core.h>

#include <linux/module.h>

#include <linux/of_device.h>

#include <linux/regmap.h>



#include <linux/mfd/lp87565.h>



static const struct regmap_config lp87565_regmap_config = {

	.reg_bits = 8,

	.val_bits = 8,

	.max_register = LP87565_REG_MAX,

};



static const struct mfd_cell lp87565_cells[] = {

	{ .name = "lp87565-q1-regulator", },

	{ .name = "lp87565-q1-gpio", },

};



static const struct of_device_id of_lp87565_match_table[] = {

	{ .compatible = "ti,lp87565", },

	{

		.compatible = "ti,lp87565-q1",

		.data = (void *)LP87565_DEVICE_TYPE_LP87565_Q1,

	},

	{}

};

MODULE_DEVICE_TABLE(of, of_lp87565_match_table);



static int lp87565_probe(struct i2c_client *client,

			 const struct i2c_device_id *ids)

{

	struct lp87565 *lp87565;

	const struct of_device_id *of_id;

	int ret;

	unsigned int otpid;



	lp87565 = devm_kzalloc(&client->dev, sizeof(*lp87565), GFP_KERNEL);

	if (!lp87565)

		return -ENOMEM;



	lp87565->dev = &client->dev;



	lp87565->regmap = devm_regmap_init_i2c(client, &lp87565_regmap_config);

	if (IS_ERR(lp87565->regmap)) {

		ret = PTR_ERR(lp87565->regmap);

		dev_err(lp87565->dev,

			"Failed to initialize register map: %d\n", ret);

		return ret;

	}



	ret = regmap_read(lp87565->regmap, LP87565_REG_OTP_REV, &otpid);

	if (ret) {

		dev_err(lp87565->dev, "Failed to read OTP ID\n");

		return ret;

	}



	lp87565->rev = otpid & LP87565_OTP_REV_OTP_ID;



	of_id = of_match_device(of_lp87565_match_table, &client->dev);

	if (of_id)

		lp87565->dev_type = (enum lp87565_device_type)of_id->data;



	i2c_set_clientdata(client, lp87565);



	ret = mfd_add_devices(lp87565->dev, PLATFORM_DEVID_AUTO, lp87565_cells,

			      ARRAY_SIZE(lp87565_cells), NULL, 0, NULL);



	return ret;

}



static const struct i2c_device_id lp87565_id_table[] = {

	{ "lp87565-q1", 0 },

	{ },

};

MODULE_DEVICE_TABLE(i2c, lp87565_id_table);



static struct i2c_driver lp87565_driver = {

	.driver	= {

		.name	= "lp87565",

		.of_match_table = of_lp87565_match_table,

	},

	.probe = lp87565_probe,

	.id_table = lp87565_id_table,

};

module_i2c_driver(lp87565_driver);



MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");

MODULE_DESCRIPTION("lp87565 chip family Multi-Function Device driver");

MODULE_LICENSE("GPL v2");

include/linux/mfd/lp87565.h

0 → 100644
+270 −0
Original line number Diff line number Diff line 
/*

 * Functions to access LP87565 power management chip.

 *

 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation version 2.

 */



#ifndef __LINUX_MFD_LP87565_H

#define __LINUX_MFD_LP87565_H



#include <linux/i2c.h>

#include <linux/regulator/driver.h>

#include <linux/regulator/machine.h>



enum lp87565_device_type {

	LP87565_DEVICE_TYPE_UNKNOWN	= 0,

	LP87565_DEVICE_TYPE_LP87565_Q1,

};



/* All register addresses */

#define LP87565_REG_DEV_REV		0X00

#define LP87565_REG_OTP_REV		0X01

#define LP87565_REG_BUCK0_CTRL_1		0X02

#define LP87565_REG_BUCK0_CTRL_2		0X03



#define LP87565_REG_BUCK1_CTRL_1		0X04

#define LP87565_REG_BUCK1_CTRL_2		0X05



#define LP87565_REG_BUCK2_CTRL_1		0X06

#define LP87565_REG_BUCK2_CTRL_2		0X07



#define LP87565_REG_BUCK3_CTRL_1		0X08

#define LP87565_REG_BUCK3_CTRL_2		0X09



#define LP87565_REG_BUCK0_VOUT			0X0A

#define LP87565_REG_BUCK0_FLOOR_VOUT		0X0B



#define LP87565_REG_BUCK1_VOUT			0X0C

#define LP87565_REG_BUCK1_FLOOR_VOUT		0X0D



#define LP87565_REG_BUCK2_VOUT			0X0E

#define LP87565_REG_BUCK2_FLOOR_VOUT		0X0F



#define LP87565_REG_BUCK3_VOUT			0X10

#define LP87565_REG_BUCK3_FLOOR_VOUT		0X11



#define LP87565_REG_BUCK0_DELAY			0X12

#define LP87565_REG_BUCK1_DELAY			0X13



#define LP87565_REG_BUCK2_DELAY			0X14

#define LP87565_REG_BUCK3_DELAY			0X15



#define LP87565_REG_GPO2_DELAY			0X16

#define LP87565_REG_GPO3_DELAY			0X17

#define LP87565_REG_RESET			0X18

#define LP87565_REG_CONFIG			0X19



#define LP87565_REG_INT_TOP_1			0X1A

#define LP87565_REG_INT_TOP_2			0X1B



#define LP87565_REG_INT_BUCK_0_1		0X1C

#define LP87565_REG_INT_BUCK_2_3		0X1D

#define LP87565_REG_TOP_STAT			0X1E

#define LP87565_REG_BUCK_0_1_STAT		0X1F

#define LP87565_REG_BUCK_2_3_STAT		0x20



#define LP87565_REG_TOP_MASK_1			0x21

#define LP87565_REG_TOP_MASK_2			0x22



#define LP87565_REG_BUCK_0_1_MASK		0x23

#define LP87565_REG_BUCK_2_3_MASK		0x24

#define LP87565_REG_SEL_I_LOAD			0x25



#define LP87565_REG_I_LOAD_2			0x26

#define LP87565_REG_I_LOAD_1			0x27



#define LP87565_REG_PGOOD_CTRL1			0x28

#define LP87565_REG_PGOOD_CTRL2			0x29

#define LP87565_REG_PGOOD_FLT			0x2A

#define LP87565_REG_PLL_CTRL			0x2B

#define LP87565_REG_PIN_FUNCTION		0x2C

#define LP87565_REG_GPIO_CONFIG			0x2D

#define LP87565_REG_GPIO_IN			0x2E

#define LP87565_REG_GPIO_OUT			0x2F



#define LP87565_REG_MAX			LP87565_REG_GPIO_OUT



/* Register field definitions */

#define LP87565_DEV_REV_DEV_ID			0xC0

#define LP87565_DEV_REV_ALL_LAYER		0x30

#define LP87565_DEV_REV_METAL_LAYER		0x0F



#define LP87565_OTP_REV_OTP_ID			0xFF



#define LP87565_BUCK_CTRL_1_EN			BIT(7)

#define LP87565_BUCK_CTRL_1_EN_PIN_CTRL		BIT(6)

#define LP87565_BUCK_CTRL_1_PIN_SELECT_EN	0x30



#define LP87565_BUCK_CTRL_1_ROOF_FLOOR_EN	BIT(3)

#define LP87565_BUCK_CTRL_1_RDIS_EN		BIT(2)

#define LP87565_BUCK_CTRL_1_FPWM		BIT(1)

/* Bit0 is reserved for BUCK1 and BUCK3 and valid only for BUCK0 and BUCK2 */

#define LP87565_BUCK_CTRL_1_FPWM_MP_0_2		BIT(0)



#define LP87565_BUCK_CTRL_2_ILIM		0x38

#define LP87565_BUCK_CTRL_2_SLEW_RATE		0x07



#define LP87565_BUCK_VSET			0xFF

#define LP87565_BUCK_FLOOR_VSET			0xFF



#define LP87565_BUCK_SHUTDOWN_DELAY		0xF0

#define LP87565_BUCK_STARTUP_DELAY		0x0F



#define LP87565_GPIO_SHUTDOWN_DELAY		0xF0

#define LP87565_GPIO_STARTUP_DELAY		0x0F



#define LP87565_RESET_SW_RESET			BIT(0)



#define LP87565_CONFIG_DOUBLE_DELAY		BIT(7)

#define LP87565_CONFIG_CLKIN_PD			BIT(6)

#define LP87565_CONFIG_EN4_PD			BIT(5)

#define LP87565_CONFIG_EN3_PD			BIT(4)

#define LP87565_CONFIG_TDIE_WARN_LEVEL		BIT(3)

#define LP87565_CONFIG_EN2_PD			BIT(2)

#define LP87565_CONFIG_EN1_PD			BIT(1)



#define LP87565_INT_GPIO			BIT(7)

#define LP87565_INT_BUCK23			BIT(6)

#define LP87565_INT_BUCK01			BIT(5)

#define LP87565_NO_SYNC_CLK			BIT(4)

#define LP87565_TDIE_SD				BIT(3)

#define LP87565_TDIE_WARN			BIT(2)

#define LP87565_INT_OVP				BIT(1)

#define LP87565_I_LOAD_READY			BIT(0)



#define LP87565_INT_TOP2_RESET_REG		BIT(0)



#define LP87565_BUCK1_PG_INT			BIT(6)

#define LP87565_BUCK1_SC_INT			BIT(5)

#define LP87565_BUCK1_ILIM_INT			BIT(4)

#define LP87565_BUCK0_PG_INT			BIT(2)

#define LP87565_BUCK0_SC_INT			BIT(1)

#define LP87565_BUCK0_ILIM_INT			BIT(0)



#define LP87565_BUCK3_PG_INT			BIT(6)

#define LP87565_BUCK3_SC_INT			BIT(5)

#define LP87565_BUCK3_ILIM_INT			BIT(4)

#define LP87565_BUCK2_PG_INT			BIT(2)

#define LP87565_BUCK2_SC_INT			BIT(1)

#define LP87565_BUCK2_ILIM_INT			BIT(0)



#define LP87565_SYNC_CLK_STAT			BIT(4)

#define LP87565_TDIE_SD_STAT			BIT(3)

#define LP87565_TDIE_WARN_STAT			BIT(2)

#define LP87565_OVP_STAT			BIT(1)



#define LP87565_BUCK1_STAT			BIT(7)

#define LP87565_BUCK1_PG_STAT			BIT(6)

#define LP87565_BUCK1_ILIM_STAT			BIT(4)

#define LP87565_BUCK0_STAT			BIT(3)

#define LP87565_BUCK0_PG_STAT			BIT(2)

#define LP87565_BUCK0_ILIM_STAT			BIT(0)



#define LP87565_BUCK3_STAT			BIT(7)

#define LP87565_BUCK3_PG_STAT			BIT(6)

#define LP87565_BUCK3_ILIM_STAT			BIT(4)

#define LP87565_BUCK2_STAT			BIT(3)

#define LP87565_BUCK2_PG_STAT			BIT(2)

#define LP87565_BUCK2_ILIM_STAT			BIT(0)



#define LPL87565_GPIO_MASK			BIT(7)

#define LPL87565_SYNC_CLK_MASK			BIT(4)

#define LPL87565_TDIE_WARN_MASK			BIT(2)

#define LPL87565_I_LOAD_READY_MASK		BIT(0)



#define LPL87565_RESET_REG_MASK			BIT(0)



#define LPL87565_BUCK1_PG_MASK			BIT(6)

#define LPL87565_BUCK1_ILIM_MASK		BIT(4)

#define LPL87565_BUCK0_PG_MASK			BIT(2)

#define LPL87565_BUCK0_ILIM_MASK		BIT(0)



#define LPL87565_BUCK3_PG_MASK			BIT(6)

#define LPL87565_BUCK3_ILIM_MASK		BIT(4)

#define LPL87565_BUCK2_PG_MASK			BIT(2)

#define LPL87565_BUCK2_ILIM_MASK		BIT(0)



#define LP87565_LOAD_CURRENT_BUCK_SELECT	0x3



#define LP87565_I_LOAD2_BUCK_LOAD_CURRENT	0x3

#define LP87565_I_LOAD1_BUCK_LOAD_CURRENT	0xFF



#define LP87565_PG3_SEL				0xC0

#define LP87565_PG2_SEL				0x30

#define LP87565_PG1_SEL				0x0C

#define LP87565_PG0_SEL				0x03



#define LP87565_HALF_DAY			BIT(7)

#define LP87565_EN_PG0_NINT			BIT(6)

#define LP87565_PGOOD_SET_DELAY			BIT(5)

#define LP87565_EN_PGFLT_STAT			BIT(4)

#define LP87565_PGOOD_WINDOW			BIT(2)

#define LP87565_PGOOD_OD			BIT(1)

#define LP87565_PGOOD_POL			BIT(0)



#define LP87565_PG3_FLT				BIT(3)

#define LP87565_PG2_FLT				BIT(2)

#define LP87565_PG1_FLT				BIT(1)

#define LP87565_PG0_FLT				BIT(0)



#define LP87565_PLL_MODE			0xC0

#define LP87565_EXT_CLK_FREQ			0x1F



#define LP87565_EN_SPREAD_SPEC			BIT(7)

#define LP87565_EN_PIN_CTRL_GPIO3		BIT(6)

#define LP87565_EN_PIN_SELECT_GPIO3		BIT(5)

#define LP87565_EN_PIN_CTRL_GPIO2		BIT(4)

#define LP87565_EN_PIN_SELECT_GPIO2		BIT(3)

#define LP87565_GPIO3_SEL			BIT(2)

#define LP87565_GPIO2_SEL			BIT(1)

#define LP87565_GPIO1_SEL			BIT(0)



#define LP87565_GOIO3_OD			BIT(6)

#define LP87565_GOIO2_OD			BIT(5)

#define LP87565_GOIO1_OD			BIT(4)

#define LP87565_GOIO3_DIR			BIT(2)

#define LP87565_GOIO2_DIR			BIT(1)

#define LP87565_GOIO1_DIR			BIT(0)



#define LP87565_GOIO3_IN			BIT(2)

#define LP87565_GOIO2_IN			BIT(1)

#define LP87565_GOIO1_IN			BIT(0)



#define LP87565_GOIO3_OUT			BIT(2)

#define LP87565_GOIO2_OUT			BIT(1)

#define LP87565_GOIO1_OUT			BIT(0)



/* Number of step-down converters available */

#define LP87565_NUM_BUCK		6



enum LP87565_regulator_id {

	/* BUCK's */

	LP87565_BUCK_0,

	LP87565_BUCK_1,

	LP87565_BUCK_2,

	LP87565_BUCK_3,

	LP87565_BUCK_10,

	LP87565_BUCK_23,

};



/**

 * struct LP87565 - state holder for the LP87565 driver

 * @dev: struct device pointer for MFD device

 * @rev: revision of the LP87565

 * @dev_type: The device type for example lp87565-q1

 * @lock: lock guarding the data structure

 * @regmap: register map of the LP87565 PMIC

 *

 * Device data may be used to access the LP87565 chip

 */

struct lp87565 {

	struct device *dev;

	u8 rev;

	u8 dev_type;

	struct regmap *regmap;

};

#endif /* __LINUX_MFD_LP87565_H */