Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1d68c286 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'r8152-autoresume' 



Hayes Wang says:

====================
r8152: fix the autoresume may fail

Fix the autosuspend issues which occur about linking change.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 52fe51f8 2dd49e0f

drivers/net/usb/r8152.c

+63 −3
Original line number Diff line number Diff line
@@ -26,8 +26,13 @@ 
#include <linux/mdio.h>

#include <linux/usb/cdc.h>



/* Version Information */

#define DRIVER_VERSION "v1.08.1 (2015/07/28)"

/* Information for net-next */

#define NETNEXT_VERSION		"08"



/* Information for net */

#define NET_VERSION		"2"



#define DRIVER_VERSION		"v1." NETNEXT_VERSION "." NET_VERSION

#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"

#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"

#define MODULENAME "r8152"
@@ -143,6 +148,7 @@ 
#define OCP_EEE_ABLE		0xa5c4

#define OCP_EEE_ADV		0xa5d0

#define OCP_EEE_LPABLE		0xa5d2

#define OCP_PHY_STATE		0xa708		/* nway state for 8153 */

#define OCP_ADC_CFG		0xbc06



/* SRAM Register */
@@ -427,6 +433,10 @@ 
/* OCP_DOWN_SPEED */

#define EN_10M_BGOFF		0x0080



/* OCP_PHY_STATE */

#define TXDIS_STATE		0x01

#define ABD_STATE		0x02



/* OCP_ADC_CFG */

#define CKADSEL_L		0x0100

#define ADC_EN			0x0080
@@ -604,6 +614,7 @@ struct r8152 { 
		void (*unload)(struct r8152 *);

		int (*eee_get)(struct r8152 *, struct ethtool_eee *);

		int (*eee_set)(struct r8152 *, struct ethtool_eee *);

		bool (*in_nway)(struct r8152 *);

	} rtl_ops;



	int intr_interval;
@@ -2941,6 +2952,32 @@ static void rtl8153_down(struct r8152 *tp) 
	r8153_enable_aldps(tp);

}



static bool rtl8152_in_nway(struct r8152 *tp)

{

	u16 nway_state;



	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, 0x2000);

	tp->ocp_base = 0x2000;

	ocp_write_byte(tp, MCU_TYPE_PLA, 0xb014, 0x4c);		/* phy state */

	nway_state = ocp_read_word(tp, MCU_TYPE_PLA, 0xb01a);



	/* bit 15: TXDIS_STATE, bit 14: ABD_STATE */

	if (nway_state & 0xc000)

		return false;

	else

		return true;

}



static bool rtl8153_in_nway(struct r8152 *tp)

{

	u16 phy_state = ocp_reg_read(tp, OCP_PHY_STATE) & 0xff;



	if (phy_state == TXDIS_STATE || phy_state == ABD_STATE)

		return false;

	else

		return true;

}



static void set_carrier(struct r8152 *tp)

{

	struct net_device *netdev = tp->netdev;
@@ -3405,6 +3442,27 @@ static int rtl8152_post_reset(struct usb_interface *intf) 
	return 0;

}



static bool delay_autosuspend(struct r8152 *tp)

{

	bool sw_linking = !!netif_carrier_ok(tp->netdev);

	bool hw_linking = !!(rtl8152_get_speed(tp) & LINK_STATUS);



	/* This means a linking change occurs and the driver doesn't detect it,

	 * yet. If the driver has disabled tx/rx and hw is linking on, the

	 * device wouldn't wake up by receiving any packet.

	 */

	if (work_busy(&tp->schedule.work) || sw_linking != hw_linking)

		return true;



	/* If the linking down is occurred by nway, the device may miss the

	 * linking change event. And it wouldn't wake when linking on.

	 */

	if (!sw_linking && tp->rtl_ops.in_nway(tp))

		return true;

	else

		return false;

}



static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)

{

	struct r8152 *tp = usb_get_intfdata(intf);
@@ -3414,7 +3472,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) 
	mutex_lock(&tp->control);



	if (PMSG_IS_AUTO(message)) {

		if (netif_running(netdev) && work_busy(&tp->schedule.work)) {

		if (netif_running(netdev) && delay_autosuspend(tp)) {

			ret = -EBUSY;

			goto out1;

		}
@@ -4044,6 +4102,7 @@ static int rtl_ops_init(struct r8152 *tp) 
		ops->unload		= rtl8152_unload;

		ops->eee_get		= r8152_get_eee;

		ops->eee_set		= r8152_set_eee;

		ops->in_nway		= rtl8152_in_nway;

		break;



	case RTL_VER_03:
@@ -4058,6 +4117,7 @@ static int rtl_ops_init(struct r8152 *tp) 
		ops->unload		= rtl8153_unload;

		ops->eee_get		= r8153_get_eee;

		ops->eee_set		= r8153_set_eee;

		ops->in_nway		= rtl8153_in_nway;

		break;



	default: