Revert "drivers: of: add initialization code for dma reserved memory"

*** Memory binding ***

The /memory node provides basic information about the address and size

of the physical memory. This node is usually filled or updated by the

bootloader, depending on the actual memory configuration of the given

hardware.

The memory layout is described by the following node:

/ {

	#address-cells = <(n)>;

	#size-cells = <(m)>;

	memory {

		device_type = "memory";

		reg =  <(baseaddr1) (size1)

			(baseaddr2) (size2)

			...

			(baseaddrN) (sizeN)>;

	};

	...

};

A memory node follows the typical device tree rules for "reg" property:

n:		number of cells used to store base address value

m:		number of cells used to store size value

baseaddrX:	defines a base address of the defined memory bank

sizeX:		the size of the defined memory bank

More than one memory bank can be defined.

*** Reserved memory regions ***

In /memory/reserved-memory node one can create child nodes describing

particular reserved (excluded from normal use) memory regions. Such

memory regions are usually designed for the special usage by various

device drivers. A good example are contiguous memory allocations or

memory sharing with other operating system on the same hardware board.

Those special memory regions might depend on the board configuration and

devices used on the target system.

Parameters for each memory region can be encoded into the device tree

with the following convention:

[(label):] (name) {

	compatible = "linux,contiguous-memory-region", "reserved-memory-region";

	reg = <(address) (size)>;

	(linux,default-contiguous-region);

};

compatible:	one or more of:

	- "linux,contiguous-memory-region" - enables binding of this

	  region to Contiguous Memory Allocator (special region for

	  contiguous memory allocations, shared with movable system

	  memory, Linux kernel-specific).

	- "reserved-memory-region" - compatibility is defined, given

	  region is assigned for exclusive usage for by the respective

	  devices.

reg:	standard property defining the base address and size of

	the memory region

linux,default-contiguous-region: property indicating that the region

	is the default region for all contiguous memory

	allocations, Linux specific (optional)

It is optional to specify the base address, so if one wants to use

autoconfiguration of the base address, '0' can be specified as a base

address in the 'reg' property.

The /memory/reserved-memory node must contain the same #address-cells

and #size-cells value as the root node.

*** Device node's properties ***

Once regions in the /memory/reserved-memory node have been defined, they

may be referenced by other device nodes. Bindings that wish to reference

memory regions should explicitly document their use of the following

property:

memory-region = <&phandle_to_defined_region>;

This property indicates that the device driver should use the memory

region pointed by the given phandle.

*** Example ***

This example defines a memory consisting of 4 memory banks. 3 contiguous

regions are defined for Linux kernel, one default of all device drivers

(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the

framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)

and one for multimedia processing (labelled multimedia_mem, placed at

0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000

device for DMA memory allocations (Linux kernel drivers will use CMA is

available or dma-exclusive usage otherwise). 'multimedia_mem' is

assigned to scaler@12500000 and codec@12600000 devices for contiguous

memory allocations when CMA driver is enabled.

The reason for creating a separate region for framebuffer device is to

match the framebuffer base address to the one configured by bootloader,

so once Linux kernel drivers starts no glitches on the displayed boot

logo appears. Scaller and codec drivers should share the memory

allocations.

/ {

	#address-cells = <1>;

	#size-cells = <1>;

	/* ... */

	memory {

		reg =  <0x40000000 0x10000000

			0x50000000 0x10000000

			0x60000000 0x10000000

			0x70000000 0x10000000>;

		reserved-memory {

			#address-cells = <1>;

			#size-cells = <1>;

			/*

			 * global autoconfigured region for contiguous allocations

			 * (used only with Contiguous Memory Allocator)

			 */

			contig_region@0 {

				compatible = "linux,contiguous-memory-region";

				reg = <0x0 0x4000000>;

				linux,default-contiguous-region;

			};

			/*

			 * special region for framebuffer

			 */

			display_region: region@78000000 {

				compatible = "linux,contiguous-memory-region", "reserved-memory-region";

				reg = <0x78000000 0x800000>;

			};

			/*

			 * special region for multimedia processing devices

			 */

			multimedia_region: region@77000000 {

				compatible = "linux,contiguous-memory-region";

				reg = <0x77000000 0x4000000>;

			};

		};

	};

	/* ... */

	fb0: fb@12300000 {

		status = "okay";

		memory-region = <&display_region>;

	};

	scaler: scaler@12500000 {

		status = "okay";

		memory-region = <&multimedia_region>;

	};

	codec: codec@12600000 {

		status = "okay";

		memory-region = <&multimedia_region>;

	};

};

	depends on MTD

	def_bool y

config OF_RESERVED_MEM

	depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK))

	def_bool y

	help

	  Initialization code for DMA reserved memory

endmenu # OF

obj-$(CONFIG_OF_PCI)	+= of_pci.o

obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o

obj-$(CONFIG_OF_MTD)	+= of_mtd.o

obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o

/*

 * Device tree based initialization code for reserved memory.

 *

 * Copyright (c) 2013 Samsung Electronics Co., Ltd.

 *		http://www.samsung.com

 * Author: Marek Szyprowski <m.szyprowski@samsung.com>

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation; either version 2 of the

 * License or (at your optional) any later version of the license.

 */

#include <linux/memblock.h>

#include <linux/err.h>

#include <linux/of.h>

#include <linux/of_fdt.h>

#include <linux/of_platform.h>

#include <linux/mm.h>

#include <linux/sizes.h>

#include <linux/mm_types.h>

#include <linux/dma-contiguous.h>

#include <linux/dma-mapping.h>

#include <linux/of_reserved_mem.h>

#define MAX_RESERVED_REGIONS	16

struct reserved_mem {

	phys_addr_t		base;

	unsigned long		size;

	struct cma		*cma;

	char			name[32];

};

static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];

static int reserved_mem_count;

static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname,

					int depth, void *data)

{

	struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];

	phys_addr_t base, size;

	int is_cma, is_reserved;

	unsigned long len;

	const char *status;

	__be32 *prop;

	is_cma = IS_ENABLED(CONFIG_DMA_CMA) &&

	       of_flat_dt_is_compatible(node, "linux,contiguous-memory-region");

	is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region");

	if (!is_reserved && !is_cma) {

		/* ignore node and scan next one */

		return 0;

	}

	status = of_get_flat_dt_prop(node, "status", &len);

	if (status && strcmp(status, "okay") != 0) {

		/* ignore disabled node nad scan next one */

		return 0;

	}

	prop = of_get_flat_dt_prop(node, "reg", &len);

	if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) *

			     sizeof(__be32))) {

		pr_err("Reserved mem: node %s, incorrect \"reg\" property\n",

		       uname);

		/* ignore node and scan next one */

		return 0;

	}

	base = dt_mem_next_cell(dt_root_addr_cells, &prop);

	size = dt_mem_next_cell(dt_root_size_cells, &prop);

	if (!size) {

		/* ignore node and scan next one */

		return 0;

	}

	pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n",

		uname, (unsigned long)base, (unsigned long)size / SZ_1M);

	if (reserved_mem_count == ARRAY_SIZE(reserved_mem))

		return -ENOSPC;

	rmem->base = base;

	rmem->size = size;

	strlcpy(rmem->name, uname, sizeof(rmem->name));

	if (is_cma) {

		struct cma *cma;

		if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) {

			rmem->cma = cma;

			reserved_mem_count++;

			if (of_get_flat_dt_prop(node,

						"linux,default-contiguous-region",

						NULL))

				dma_contiguous_set_default(cma);

		}

	} else if (is_reserved) {

		if (memblock_remove(base, size) == 0)

			reserved_mem_count++;

		else

			pr_err("Failed to reserve memory for %s\n", uname);

	}

	return 0;

}

static struct reserved_mem *get_dma_memory_region(struct device *dev)

{

	struct device_node *node;

	const char *name;

	int i;

	node = of_parse_phandle(dev->of_node, "memory-region", 0);

	if (!node)

		return NULL;

	name = kbasename(node->full_name);

	for (i = 0; i < reserved_mem_count; i++)

		if (strcmp(name, reserved_mem[i].name) == 0)

			return &reserved_mem[i];

	return NULL;

}

/**

 * of_reserved_mem_device_init() - assign reserved memory region to given device

 *

 * This function assign memory region pointed by "memory-region" device tree

 * property to the given device.

 */

void of_reserved_mem_device_init(struct device *dev)

{

	struct reserved_mem *region = get_dma_memory_region(dev);

	if (!region)

		return;

	if (region->cma) {

		dev_set_cma_area(dev, region->cma);

		pr_info("Assigned CMA %s to %s device\n", region->name,

			dev_name(dev));

	} else {

		if (dma_declare_coherent_memory(dev, region->base, region->base,

		    region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0)

			pr_info("Declared reserved memory %s to %s device\n",

				region->name, dev_name(dev));

	}

}

/**

 * of_reserved_mem_device_release() - release reserved memory device structures

 *

 * This function releases structures allocated for memory region handling for

 * the given device.

 */

void of_reserved_mem_device_release(struct device *dev)

{

	struct reserved_mem *region = get_dma_memory_region(dev);

	if (!region && !region->cma)

		dma_release_declared_memory(dev);

}

/**

 * early_init_dt_scan_reserved_mem() - create reserved memory regions

 *

 * This function grabs memory from early allocator for device exclusive use

 * defined in device tree structures. It should be called by arch specific code

 * once the early allocator (memblock) has been activated and all other

 * subsystems have already allocated/reserved memory.

 */

void __init early_init_dt_scan_reserved_mem(void)

{

	of_scan_flat_dt_by_path("/memory/reserved-memory",

				fdt_scan_reserved_mem, NULL);

}

#include <linux/of_device.h>

#include <linux/of_irq.h>

#include <linux/of_platform.h>

#include <linux/of_reserved_mem.h>

#include <linux/platform_device.h>

const struct of_device_id of_default_bus_match_table[] = {

	dev->dev.bus = &platform_bus_type;

	dev->dev.platform_data = platform_data;

	of_reserved_mem_device_init(&dev->dev);

	/* We do not fill the DMA ops for platform devices by default.

	 * This is currently the responsibility of the platform code

	 * to do such, possibly using a device notifier

	if (of_device_add(dev) != 0) {

		platform_device_put(dev);

		of_reserved_mem_device_release(&dev->dev);

		return NULL;

	}