Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 170f6965 authored by Min Liu's avatar Min Liu Committed by snandini
Browse files

qcacmn: Additional stats through QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO 

This commit introduces additional stats to query through
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO.

Change-Id: Ibc713d1da81a5bf8fa267a205680aec5539630ce
CRs-Fixed: 2758484
parent 402f93cc

os_if/linux/qca_vendor.h

+166 −0
Original line number Diff line number Diff line
@@ -8931,6 +8931,147 @@ enum qca_vendor_wlan_sta_guard_interval { 
 * Value indicates the number of data frames not transmitted successfully even

 * after retrying the packets for the number of times equal to the total number

 * of retries allowed for that packet.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT: u32, used in

 * the STA mode only. Represent the number of probe requests sent by the STA

 * while attempting to roam on missing certain number of beacons from the

 * connected AP. If queried in the disconnected state, this represents the

 * count for the last connected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT: u32, used in

 * the STA mode. Represent the number of probe responses received by the station

 * while attempting to roam on missing certain number of beacons from the

 * connected AP. When queried in the disconnected state, this represents the

 * count when in last connected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT: u32, used in the

 * STA mode only. Represents the total number of frames sent out by STA

 * including Data, ACK, RTS, CTS, Control Management. This data is maintained

 * only for the connect session. Represents the count of last connected session,

 * when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT: u32, used in the STA mode.

 * Total number of RTS sent out by the STA. This data is maintained per connect

 * session. Represents the count of last connected session, when queried in the

 * disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT: u32, used in the

 * STA mode.Represent the number of RTS transmission failure that reach retry

 * limit. This data is maintained per connect session. Represents the count of

 * last connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT: u32, used in

 * the STA mode. Represent the total number of non aggregated frames transmitted

 * by the STA. This data is maintained per connect session. Represents the count

 * of last connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT: u32, used in the

 * STA mode. Represent the total number of aggregated frames transmitted by the

 * STA. This data is maintained per connect session. Represents the count of

 * last connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT: u32, used in

 * the STA mode. Represents the number of received frames with a good PLCP. This

 * data is maintained per connect session. Represents the count of last

 * connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT: u32,

 * used in the STA mode. Represents the number of occasions that no valid

 * delimiter is detected by A-MPDU parser. This data is maintained per connect

 * session. Represents the count of last connected session, when queried in the

 * disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT: u32, used in the

 * STA mode. Represents the number of frames for which CRC check failed in the

 * MAC. This data is maintained per connect session. Represents the count of

 * last connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT: u32, used in the

 * STA mode. Represents the number of unicast ACKs received with good FCS. This

 * data is maintained per connect session. Represents the count of last

 * connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT: u32, used in the STA

 * mode. Represents the number of received Block Acks. This data is maintained

 * per connect session. Represents the count of last connected session, when

 * queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT: u32, used in the STA

 * mode. Represents the number of beacons received from the connected BSS. This

 * data is maintained per connect session. Represents the count of last

 * connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT: u32, used in the

 * STA mode. Represents the number of beacons received by the other BSS when in

 * connected state (through the probes done by the STA). This data is maintained

 * per connect session. Represents the count of last connected session, when

 * queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT: u64, used in

 * the STA mode. Represents the number of received DATA frames with good FCS and

 * matching Receiver Address when in connected state. This data is maintained

 * per connect session. Represents the count of last connected session, when

 * queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT: u32, used in the

 * STA mode. Represents the number of RX Data multicast frames dropped by the HW

 * when in the connected state. This data is maintained per connect session.

 * Represents the count of last connected session, when queried in the

 * disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS: u32, used in the

 * STA mode. This represents the target power in dBm for the transmissions done

 * to the AP in 2.4 GHz at 1 Mbps (DSSS) rate. This data is maintained per

 * connect session. Represents the count of last connected session, when

 * queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS: u32, used in the

 * STA mode. This represents the Target power in dBm for transmissions done to

 * the AP in 2.4 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect

 * session. Represents the count of last connected session, when queried in the

 * disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0: u32, used in the

 * STA mode. This represents the Target power in dBm for transmissions done to

 * the AP in 2.4 GHz at MCS0 rate. This data is maintained per connect session.

 * Represents the count of last connected session, when queried in the

 * disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS: u32, used in the

 * STA mode. This represents the Target power in dBm for transmissions done to

 * the AP in 5 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect

 * session. Represents the count of last connected session, when queried in

 * the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0: u32, used in the

 * STA mode. This represents the Target power in dBm for for transmissions done

 * to the AP in 5 GHz at MCS0 rate. This data is maintained per connect session.

 * Represents the count of last connected session, when queried in the

 * disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT: u32, used

 * in the STA mode. This represents the Nested attribute representing the

 * overflow counts of each receive buffer allocated to the hardware during the

 * STA's connection. The number of hw buffers might vary for each WLAN

 * solution and hence this attribute represents the nested array of all such

 * HW buffer count. This data is maintained per connect session. Represents

 * the count of last connected session, when queried in the disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER: u32, Max TX power (dBm)

 * allowed as per the regulatory requirements for the current or last connected

 * session. Used in the STA mode.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER: u32, Latest TX power

 * (dBm) used by the station in its latest unicast frame while communicating

 * to the AP in the connected state. When queried in the disconnected state,

 * this represents the TX power used by the STA with last AP communication

 * when in connected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL: u32, Adaptive noise immunity

 * level used to adjust the RX sensitivity. Represents the current ANI level

 * when queried in the connected state. When queried in the disconnected

 * state, this corresponds to the latest ANI level at the instance of

 * disconnection.

 */

enum qca_wlan_vendor_attr_get_sta_info {

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
@@ -8944,6 +9085,31 @@ enum qca_wlan_vendor_attr_get_sta_info { 
	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL = 8,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY = 9,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED = 10,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT = 11,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT = 12,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT = 13,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT = 14,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT = 15,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT = 16,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT = 17,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT = 18,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT = 19,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT = 20,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT = 21,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT = 22,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT = 23,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT = 24,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT = 25,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT = 26,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS = 27,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS = 28,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0 = 29,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS = 30,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0 = 31,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT = 32,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER = 33,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER = 34,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL = 35,



	/* keep last */

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,