Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 17064246 authored by Paweł Chmiel's avatar Paweł Chmiel Committed by Krzysztof Kozlowski
Browse files

ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones 



This DTS file have initial support Samsung Aries based phones.
Initial version have support for:
 - sdcard
 - internal memory (present only on non 4g variant)
 - max8998 pmic and rtc
 - max17040 fuel gauge
 - gpio keys
 - fimd (no panel driver yet)
 - usb (peripherial mode)
 - wifi

Signed-off-by: default avatarPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent 3508f7ce

arch/arm/boot/dts/s5pv210-aries.dtsi

0 → 100644
+419 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Samsung's S5PV210 based Galaxy Aries board device tree source

 */



/dts-v1/;

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include "s5pv210.dtsi"



/ {

	compatible = "samsung,aries", "samsung,s5pv210";



	aliases {

		i2c6 = &i2c_pmic;

		i2c9 = &i2c_fuel;

	};



	memory@30000000 {

		device_type = "memory";

		reg = <0x30000000 0x05000000

			0x40000000 0x10000000

			0x50000000 0x08000000>;

	};



	wifi_pwrseq: wifi-pwrseq {

		compatible = "mmc-pwrseq-simple";

		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&wlan_gpio_rst>;

		post-power-on-delay-ms = <500>;

		power-off-delay-us = <500>;

	};



	i2c_pmic: i2c-gpio-0 {

		compatible = "i2c-gpio";

		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

		i2c-gpio,delay-us = <2>;

		#address-cells = <1>;

		#size-cells = <0>;



		pmic@66 {

			compatible = "maxim,max8998";

			reg = <0x66>;

			interrupt-parent = <&gph0>;

			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;



			max8998,pmic-buck1-default-dvs-idx = <1>;

			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,

							<&gph0 4 GPIO_ACTIVE_HIGH>;

			max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,

							<1050000>, <950000>;



			max8998,pmic-buck2-default-dvs-idx = <0>;

			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;

			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;



			regulators {

				ldo2_reg: LDO2 {

					regulator-name = "VALIVE_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;



					regulator-state-mem {

						regulator-on-in-suspend;

					};

				};



				ldo3_reg: LDO3 {

					regulator-name = "VUSB_1.1V";

					regulator-min-microvolt = <1100000>;

					regulator-max-microvolt = <1100000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo4_reg: LDO4 {

					regulator-name = "VADC_3.3V";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

					regulator-always-on;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo5_reg: LDO5 {

					regulator-name = "VTF_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo6_reg: LDO6 {

					regulator-name = "LDO6";

					regulator-min-microvolt = <1600000>;

					regulator-max-microvolt = <3600000>;

				};



				ldo7_reg: LDO7 {

					regulator-name = "VLCD_1.8V";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					/* Till we get panel driver */

					regulator-always-on;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo8_reg: LDO8 {

					regulator-name = "VUSB_3.3V";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo9_reg: LDO9 {

					regulator-name = "VCC_2.8V_PDA";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					regulator-always-on;

				};



				ldo10_reg: LDO10 {

					regulator-name = "VPLL_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;



					regulator-state-mem {

						regulator-on-in-suspend;

					};

				};



				ldo11_reg: LDO11 {

					regulator-name = "CAM_AF_3.0V";

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo12_reg: LDO12 {

					regulator-name = "CAM_SENSOR_CORE_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo13_reg: LDO13 {

					regulator-name = "VGA_VDDIO_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo14_reg: LDO14 {

					regulator-name = "VGA_DVDD_1.8V";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo15_reg: LDO15 {

					regulator-name = "CAM_ISP_HOST_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo16_reg: LDO16 {

					regulator-name = "VGA_AVDD_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ldo17_reg: LDO17 {

					regulator-name = "VCC_3.0V_LCD";

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

					/* Till we get panel driver */

					regulator-always-on;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				buck1_reg: BUCK1 {

					regulator-name = "vddarm";

					regulator-min-microvolt = <750000>;

					regulator-max-microvolt = <1500000>;



					regulator-state-mem {

						regulator-off-in-suspend;

						regulator-suspend-microvolt = <1250000>;

					};

				};



				buck2_reg: BUCK2 {

					regulator-name = "vddint";

					regulator-min-microvolt = <750000>;

					regulator-max-microvolt = <1500000>;



					regulator-state-mem {

						regulator-off-in-suspend;

						regulator-suspend-microvolt = <1100000>;

					};

				};



				buck3_reg: BUCK3 {

					regulator-name = "VCC_1.8V";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

				};



				buck4_reg: BUCK4 {

					regulator-name = "CAM_ISP_CORE_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;



					regulator-state-mem {

						regulator-off-in-suspend;

					};

				};



				ap32khz_reg: EN32KHz-AP {

					regulator-name = "32KHz AP";

					regulator-always-on;

				};



				cp32khz_reg: EN32KHz-CP {

					regulator-name = "32KHz CP";

				};



				vichg_reg: ENVICHG {

					regulator-name = "VICHG";

					regulator-always-on;

				};



				safe1_sreg: ESAFEOUT1 {

					regulator-name = "SAFEOUT1";

				};



				safe2_sreg: ESAFEOUT2 {

					regulator-name = "SAFEOUT2";

				};

			};

		};

	};



	i2c_fuel: i2c-gpio-1 {

		compatible = "i2c-gpio";

		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

		i2c-gpio,delay-us = <2>;

		#address-cells = <1>;

		#size-cells = <0>;



		fuelgauge@36 {

			compatible = "maxim,max17040";

			interrupt-parent = <&vic0>;

			interrupts = <7>;

			reg = <0x36>;

		};

	};

};



&fimd {

	pinctrl-names = "default";

	pinctrl-0 = <&lcd_clk &lcd_data24>;

	status = "okay";



	samsung,invert-vden;

	samsung,invert-vclk;



	display-timings {

		timing-0 {

			/* 480x800@60Hz */

			clock-frequency = <25628040>;

			hactive = <480>;

			vactive = <800>;

			hfront-porch = <16>;

			hback-porch = <16>;

			hsync-len = <2>;

			vfront-porch = <28>;

			vback-porch = <1>;

			vsync-len = <2>;

		};

	};

};



&hsotg {

	vusb_a-supply = <&ldo8_reg>;

	vusb_d-supply = <&ldo3_reg>;

	dr_mode = "peripheral";

	status = "okay";

};



&pinctrl0 {

	wlan_bt_en: wlan-bt-en {

		samsung,pins = "gpb-5";

		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;

		samsung,pin-val = <1>;

	};



	wlan_gpio_rst: wlan-gpio-rst {

		samsung,pins = "gpg1-2";

		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;

	};



	wifi_host_wake: wifi-host-wake {

		samsung,pins = "gph2-4";

		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;

		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;

	};



	tf_detect: tf-detect {

		samsung,pins = "gph3-4";

		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;

		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;

	};



	wifi_wake: wifi-wake {

		samsung,pins = "gph3-5";

		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;

	};

};



&sdhci1 {

	#address-cells = <1>;

	#size-cells = <0>;



	bus-width = <4>;

	max-frequency = <38400000>;

	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;

	pinctrl-names = "default";

	cap-sd-highspeed;

	cap-mmc-highspeed;



	mmc-pwrseq = <&wifi_pwrseq>;

	non-removable;

	status = "okay";



	wlan@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

		interrupt-parent = <&gph2>;

		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "host-wake";

	};

};



&sdhci2 {

	bus-width = <4>;

	cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;

	vmmc-supply = <&ldo5_reg>;

	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;

	pinctrl-names = "default";

	status = "okay";

};



&uart0 {

	status = "okay";

};



&uart1 {

	status = "okay";

};



&uart2 {

	status = "okay";

};



&usbphy {

	status = "okay";

	vbus-supply = <&safe1_sreg>;

};



&xusbxti {

	clock-frequency = <24000000>;

};