docs: alphabetize entries in kernel-parameters.txt

			1,0: use 1st APIC table

			default: 0

	acpi_sleep=	[HW,ACPI] Sleep options

			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,

				  old_ordering, s4_nonvs }

			See Documentation/power/video.txt for information on

			s3_bios and s3_mode.

			s3_beep is for debugging; it makes the PC's speaker beep

			as soon as the kernel's real-mode entry point is called.

			s4_nohwsig prevents ACPI hardware signature from being

			used during resume from hibernation.

			old_ordering causes the ACPI 1.0 ordering of the _PTS

			control method, with respect to putting devices into

			low power states, to be enforced (the ACPI 2.0 ordering

			of _PTS is used by default).

			s4_nonvs prevents the kernel from saving/restoring the

			ACPI NVS memory during hibernation.

	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode

			Format: { level | edge | high | low }

	acpi_irq_balance [HW,ACPI]

			ACPI will balance active IRQs

			default in APIC mode

	acpi_irq_nobalance [HW,ACPI]

			ACPI will not move active IRQs (default)

			default in PIC mode

	acpi_irq_pci=	[HW,ACPI] If irq_balance, clear listed IRQs for

			use by PCI

			Format: <irq>,<irq>...

	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA

			Format: <irq>,<irq>...

	acpi_no_auto_ssdt	[HW,ACPI] Disable automatic loading of SSDT

	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS

			Format: To spoof as Windows 98: ="Microsoft Windows"

	acpi_osi=	[HW,ACPI] Modify list of supported OS interface strings

			acpi_osi="string1"	# add string1 -- only one string

			acpi_osi="!string2"	# remove built-in string2

			acpi_osi=		# disable all strings

	acpi_serialize	[HW,ACPI] force serialization of AML methods

	acpi_skip_timer_override [HW,ACPI]

			Recognize and ignore IRQ0/pin2 Interrupt Override.

			For broken nForce2 BIOS resulting in XT-PIC timer.

	acpi_use_timer_override [HW,ACPI]

			Use timer override. For some broken Nvidia NF5 boards

			that require a timer override, but don't have

			HPET

	acpi_backlight=	[HW,ACPI]

			acpi_backlight=vendor

			acpi_backlight=video

			(e.g. thinkpad_acpi, sony_acpi, etc.) instead

			of the ACPI video.ko driver.

	acpi_display_output=	[HW,ACPI]

			acpi_display_output=vendor

			acpi_display_output=video

			See above.

	acpi.debug_layer=	[HW,ACPI,ACPI_DEBUG]

	acpi.debug_level=	[HW,ACPI,ACPI_DEBUG]

			Format: <int>

			unusable.  The "log_buf_len" parameter may be useful

			if you need to capture more output.

	acpi_display_output=	[HW,ACPI]

			acpi_display_output=vendor

			acpi_display_output=video

			See above.

	acpi_irq_balance [HW,ACPI]

			ACPI will balance active IRQs

			default in APIC mode

	acpi_irq_nobalance [HW,ACPI]

			ACPI will not move active IRQs (default)

			default in PIC mode

	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA

			Format: <irq>,<irq>...

	acpi_irq_pci=	[HW,ACPI] If irq_balance, clear listed IRQs for

			use by PCI

			Format: <irq>,<irq>...

	acpi_no_auto_ssdt	[HW,ACPI] Disable automatic loading of SSDT

	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS

			Format: To spoof as Windows 98: ="Microsoft Windows"

	acpi_osi=	[HW,ACPI] Modify list of supported OS interface strings

			acpi_osi="string1"	# add string1 -- only one string

			acpi_osi="!string2"	# remove built-in string2

			acpi_osi=		# disable all strings

	acpi_pm_good	[X86-32,X86-64]

			Override the pmtimer bug detection: force the kernel

			to assume that this machine's pmtimer latches its value

			and always returns good values.

 	acpi.power_nocheck=	[HW,ACPI]

 			Format: 1/0 enable/disable the check of power state.

 			On some bogus BIOS the _PSC object/_STA object of

 			power state again in power transition.

 			1 : disable the power state check

	acpi_pm_good	[X86-32,X86-64]

			Override the pmtimer bug detection: force the kernel

			to assume that this machine's pmtimer latches its value

			and always returns good values.

	acpi_enforce_resources=	[ACPI]

			{ strict | lax | no }

			Check for resource conflicts between native drivers

			no: ACPI OperationRegions are not marked as reserved,

			no further checks are performed.

	agp=		[AGP]

			{ off | try_unsupported }

			off: disable AGP support

			try_unsupported: try to drive unsupported chipsets

				(may crash computer or cause data corruption)

	enable_timer_pin_1 [i386,x86-64]

			Enable PIN 1 of APIC timer

			Can be useful to work around chipset bugs

			(in particular on some ATI chipsets).

			The kernel tries to set a reasonable default.

	disable_timer_pin_1 [i386,x86-64]

			Disable PIN 1 of APIC timer

			Can be useful to work around chipset bugs.

	ad1848=		[HW,OSS]

			Format: <io>,<irq>,<dma>,<dma2>,<type>

			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>

			See also header of sound/oss/aedsp16.c.

	agp=		[AGP]

			{ off | try_unsupported }

			off: disable AGP support

			try_unsupported: try to drive unsupported chipsets

				(may crash computer or cause data corruption)

	aha152x=	[HW,SCSI]

			See Documentation/scsi/aha152x.txt.

			possible to determine what the correct size should be.

			This option provides an override for these situations.

	security=	[SECURITY] Choose a security module to enable at boot.

			If this boot parameter is not specified, only the first

			security module asking for security registration will be

			loaded. An invalid security module name will be treated

			as if no module has been chosen.

	capability.disable=

			[SECURITY] Disable capabilities.  This would normally

			be used only if an alternative security model is to be

			Range: 0 - 8192

			Default: 64

	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support

			this option disables the debugging code at boot.

	dma_debug_entries=<number>

			This option allows to tune the number of preallocated

			entries for DMA-API debugging code. One entry is

			required per DMA-API allocation. Use this if the

			DMA-API debugging code disables itself because the

			architectural default is too low.

	hpet=		[X86-32,HPET] option to control HPET usage

			Format: { enable (default) | disable | force |

				verbose }

			disable: disable HPET and use PIT instead

			force: allow force enabled of undocumented chips (ICH4,

			VIA, nVidia)

			verbose: show contents of HPET registers during setup

	com20020=	[HW,NET] ARCnet - COM20020 chipset

			Format:

			<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]

			console=brl,ttyS0

		For now, only VisioBraille is supported.

	earlycon=	[KNL] Output early console device and options.

		uart[8250],io,<addr>[,options]

		uart[8250],mmio,<addr>[,options]

			Start an early, polled-mode console on the 8250/16550

			UART at the specified I/O port or MMIO address.

			The options are the same as for ttyS, above.

	no_console_suspend

			[HW] Never suspend the console

			Disable suspending of consoles during suspend and

			hibernate operations.  Once disabled, debugging

			messages can reach various consoles while the rest

			of the system is being put to sleep (ie, while

			debugging driver suspend/resume hooks).  This may

			not work reliably with all consoles, but is known

			to work with serial and VGA consoles.

	coredump_filter=

			[KNL] Change the default value for

			/proc/<pid>/coredump_filter.

			Format: <area>[,<node>]

			See also Documentation/networking/decnet.txt.

	vt.default_blu=	[VT]

			Format: <blue0>,<blue1>,<blue2>,...,<blue15>

			Change the default blue palette of the console.

			This is a 16-member array composed of values

			ranging from 0-255.

	vt.default_grn=	[VT]

			Format: <green0>,<green1>,<green2>,...,<green15>

			Change the default green palette of the console.

			This is a 16-member array composed of values

			ranging from 0-255.

	vt.default_red=	[VT]

			Format: <red0>,<red1>,<red2>,...,<red15>

			Change the default red palette of the console.

			This is a 16-member array composed of values

			ranging from 0-255.

	vt.default_utf8=

			[VT]

			Format=<0|1>

			Set system-wide default UTF-8 mode for all tty's.

			Default is 1, i.e. UTF-8 mode is enabled for all

			newly opened terminals.

	default_hugepagesz=

			[same as hugepagesz=] The size of the default

			HugeTLB page size. This is the size represented by

			the legacy /proc/ hugepages APIs, used for SHM, and

			default size when mounting hugetlbfs filesystems.

			Defaults to the default architecture's huge page size

			if not specified.

	dhash_entries=	[KNL]

			Set number of hash buckets for dentry cache.

			Documentation/serial/digiepca.txt.

	disable_mtrr_cleanup [X86]

	enable_mtrr_cleanup [X86]

			The kernel tries to adjust MTRR layout from continuous

			to discrete, to make X server driver able to add WB

			entry later. This parameter enables/disables that.

	mtrr_chunk_size=nn[KMG] [X86]

			used for mtrr cleanup. It is largest continous chunk

			that could hold holes aka. UC entries.

	mtrr_gran_size=nn[KMG] [X86]

			Used for mtrr cleanup. It is granularity of mtrr block.

			Default is 1.

			Large value could prevent small alignment from

			using up MTRRs.

	mtrr_spare_reg_nr=n [X86]

			Format: <integer>

			Range: 0,7 : spare reg number

			Default : 1

			Used for mtrr cleanup. It is spare mtrr entries number.

			Set to 2 or more if your graphical card needs more.

			entry later. This parameter disables that.

	disable_mtrr_trim [X86, Intel and AMD only]

			By default the kernel will trim any uncacheable

			MTRR settings.  This parameter disables that behavior,

			possibly causing your machine to run very slowly.

	disable_timer_pin_1 [i386,x86-64]

			Disable PIN 1 of APIC timer

			Can be useful to work around chipset bugs.

	dmasound=	[HW,OSS] Sound subsystem buffers

	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support,

			this option disables the debugging code at boot.

	dma_debug_entries=<number>

			This option allows to tune the number of preallocated

			entries for DMA-API debugging code. One entry is

			required per DMA-API allocation. Use this if the

			DMA-API debugging code disables itself because the

			architectural default is too low.

	dscc4.setup=	[NET]

	dtc3181e=	[HW,SCSI]

	dynamic_printk	Enables pr_debug()/dev_dbg() calls if

			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.

			These can also be switched on/off via

			<debugfs>/dynamic_printk/modules

	earlycon=	[KNL] Output early console device and options.

		uart[8250],io,<addr>[,options]

		uart[8250],mmio,<addr>[,options]

			Start an early, polled-mode console on the 8250/16550

			UART at the specified I/O port or MMIO address.

			The options are the same as for ttyS, above.

	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]

			earlyprintk=vga

			earlyprintk=serial[,ttySn[,baudrate]]

			pass this option to capture kernel.

			See Documentation/kdump/kdump.txt for details.

	enable_mtrr_cleanup [X86]

			The kernel tries to adjust MTRR layout from continuous

			to discrete, to make X server driver able to add WB

			entry later. This parameter enables that.

	enable_timer_pin_1 [i386,x86-64]

			Enable PIN 1 of APIC timer

			Can be useful to work around chipset bugs

			(in particular on some ATI chipsets).

			The kernel tries to set a reasonable default.

	enforcing	[SELINUX] Set initial enforcing status.

			Format: {"0" | "1"}

			See security/selinux/Kconfig help text.

	hisax=		[HW,ISDN]

			See Documentation/isdn/README.HiSax.

	hlt		[BUGS=ARM,SH]

	hpet=		[X86-32,HPET] option to control HPET usage

			Format: { enable (default) | disable | force |

				verbose }

			disable: disable HPET and use PIT instead

			force: allow force enabled of undocumented chips (ICH4,

				VIA, nVidia)

			verbose: show contents of HPET registers during setup

	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.

	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.

			On x86-64 and powerpc, this option can be specified

			(when the CPU supports the "pdpe1gb" cpuinfo flag)

			Note that 1GB pages can only be allocated at boot time

			using hugepages= and not freed afterwards.

	default_hugepagesz=

			[same as hugepagesz=] The size of the default

			HugeTLB page size. This is the size represented by

			the legacy /proc/ hugepages APIs, used for SHM, and

			default size when mounting hugetlbfs filesystems.

			Defaults to the default architecture's huge page size

			if not specified.

	hlt		[BUGS=ARM,SH]

	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)

			       terminal devices. Valid values: 0..8

	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed

			See Documentation/ide/ide.txt.

	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem

			Claim all unknown PCI IDE storage controllers.

	idle=		[X86]

			Format: idle=poll, idle=mwait, idle=halt, idle=nomwait

			Poll forces a polling idle loop that can slightly

			In such case C2/C3 won't be used again.

			idle=nomwait: Disable mwait for CPU C-states

	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem

			Claim all unknown PCI IDE storage controllers.

	ignore_loglevel	[KNL]

			Ignore loglevel setting - this will print /all/

			kernel messages to the console. Useful for debugging.

	inport.irq=	[HW] Inport (ATI XL and Microsoft) busmouse driver

			Format: <irq>

	inttest=	[IA64]

	iomem=		Disable strict checking of access to MMIO memory

		strict	regions from userspace.

		relaxed

	iommu=		[x86]

		off

		force

		noforce

		biomerge

		panic

		nopanic

		merge

		nomerge

		forcesac

		soft

	intel_iommu=	[DMAR] Intel IOMMU driver (DMAR) option

		on

			Enable intel iommu driver.

			result in a hardware IOTLB flush operation as opposed

			to batching them for performance.

	inttest=	[IA64]

	iomem=		Disable strict checking of access to MMIO memory

		strict	regions from userspace.

		relaxed

	iommu=		[x86]

		off

		force

		noforce

		biomerge

		panic

		nopanic

		merge

		nomerge

		forcesac

		soft

	io7=		[HW] IO7 for Marvel based alpha systems

			See comment before marvel_specify_io7 in

			arch/alpha/kernel/core_marvel.c.

	io_delay=	[X86-32,X86-64] I/O delay method

		0x80

			Standard port 0x80 based delay

		none

			No delay

	io7=		[HW] IO7 for Marvel based alpha systems

			See comment before marvel_specify_io7 in

			arch/alpha/kernel/core_marvel.c.

	ip=		[IP_PNP]

			See Documentation/filesystems/nfsroot.txt.

	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller

			See header of drivers/scsi/ips.c.

	ports=		[IP_VS_FTP] IPVS ftp helper module

			Default is 21.

			Up to 8 (IP_VS_APP_MAX_PORTS) ports

			may be specified.

			Format: <port>,<port>....

	irqfixup	[HW]

			When an interrupt is not handled search all handlers

			for it. Intended to get systems with badly broken

	js=		[HW,JOY] Analog joystick

			See Documentation/input/joystick.txt.

	keepinitrd	[HW,ARM]

	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter

			specifies the amount of memory usable by the kernel

			for non-movable allocations.  The requested amount is

			higher than default (KMEMTRACE_N_SUBBUFS in code) if

			you experience buffer overruns.

	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter

			is similar to kernelcore except it specifies the

			amount of memory used for migratable allocations.

			If both kernelcore and movablecore is specified,

			then kernelcore will be at *least* the specified

			value but may be more. If movablecore on its own

			is specified, the administrator must be careful

			that the amount of memory usable for all allocations

			is not too small.

	keepinitrd	[HW,ARM]

	kstack=N	[X86-32,X86-64] Print N words from the kernel stack

			in oops dumps.

	kgdboc=		[HW] kgdb over consoles.

			Requires a tty driver that supports console polling.

			(only serial suported for now)

			Configure the RouterBoard 532 series on-chip

			Ethernet adapter MAC address.

	kstack=N	[X86-32,X86-64] Print N words from the kernel stack

			in oops dumps.

	l2cr=		[PPC]

	l3cr=		[PPC]

			(machvec) in a generic kernel.

			Example: machvec=hpzx1_swiotlb

	max_loop=	[LOOP] Maximum number of loopback devices that can

			be mounted

			Format: <1-256>

	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater

			than or equal to this physical address is ignored.

	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel

			should make use of.  maxcpus=n : n >= 0 limits the

			it is equivalent to "nosmp", which also disables

			the IO APIC.

	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater than

			or equal to this physical address is ignored.

	max_loop=	[LOOP] Maximum number of loopback devices that can

			be mounted

			Format: <1-256>

	max_luns=	[SCSI] Maximum number of LUNs to probe.

			Should be between 1 and 2^32-1.

	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices

			reporting absolute coordinates, such as tablets

	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter

			is similar to kernelcore except it specifies the

			amount of memory used for migratable allocations.

			If both kernelcore and movablecore is specified,

			then kernelcore will be at *least* the specified

			value but may be more. If movablecore on its own

			is specified, the administrator must be careful

			that the amount of memory usable for all allocations

			is not too small.

	mpu401=		[HW,OSS]

			Format: <io>,<irq>

			[HW] Make the MicroTouch USB driver use raw coordinates

			('y', default) or cooked coordinates ('n')

	mtrr_chunk_size=nn[KMG] [X86]

			used for mtrr cleanup. It is largest continous chunk

			that could hold holes aka. UC entries.

	mtrr_gran_size=nn[KMG] [X86]

			Used for mtrr cleanup. It is granularity of mtrr block.

			Default is 1.

			Large value could prevent small alignment from

			using up MTRRs.

	mtrr_spare_reg_nr=n [X86]

			Format: <integer>

			Range: 0,7 : spare reg number

			Default : 1

			Used for mtrr cleanup. It is spare mtrr entries number.

			Set to 2 or more if your graphical card needs more.

	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card

	NCR_D700=	[HW,SCSI]

			0 - turn nmi_watchdog off

			1 - use the IO-APIC timer for the NMI watchdog

			2 - use the local APIC for the NMI watchdog using

			a performance counter. Note: This will use one performance

			counter and the local APIC's performance vector.

			When panic is specified panic when an NMI watchdog timeout occurs.

			This is useful when you use a panic=... timeout and need the box

			quickly up again.

			a performance counter. Note: This will use one

			performance counter and the local APIC's performance

			vector.

			When panic is specified, panic when an NMI watchdog

			timeout occurs.

			This is useful when you use a panic=... timeout and

			need the box quickly up again.

			Instead of 1 and 2 it is possible to use the following

			symbolic names: lapic and ioapic

			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic

			emulation library even if a 387 maths coprocessor

			is present.

	no_console_suspend

			[HW] Never suspend the console

			Disable suspending of consoles during suspend and

			hibernate operations.  Once disabled, debugging

			messages can reach various consoles while the rest

			of the system is being put to sleep (ie, while

			debugging driver suspend/resume hooks).  This may

			not work reliably with all consoles, but is known

			to work with serial and VGA consoles.

	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien

			caches in the slab allocator.  Saves per-node memory,

			but will impact performance.

	nocache		[ARM]

	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction

	nodelayacct	[KNL] Disable per-task delay accounting

	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.

			register save and restore. The kernel will only save

			legacy floating-point registers on task switch.

	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction

	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or

			wfi(ARM) instruction doesn't work correctly and not to

			use it. This is also useful when using JTAG debugger.

	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.

	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.

	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of

			default x2apic cluster mode on platforms

			supporting x2apic.

	noltlbs		[PPC] Do not use large page/tlb entries for kernel

			lowmem mapping on PPC40x.

	nomfgpt		[X86-32] Disable Multi-Function General Purpose

			Timer usage (for AMD Geode machines).

	norandmaps	Don't use address space randomization.  Equivalent to

			echo 0 > /proc/sys/kernel/randomize_va_space

	noreplace-paravirt	[X86-32,PV_OPS] Don't patch paravirt_ops

	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions

			purges which is reported from either PAL_VM_SUMMARY or

			SAL PALO.

	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.

	numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.

			one of ['zone', 'node', 'default'] can be specified

			This can be set from sysctl after boot.

			See Documentation/sysctl/vm.txt for details.

	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.

	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.

			See Documentation/debugging-via-ohci1394.txt for more

			info.

	printk.time=	Show timing data prefixed to each printk message line

			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)

	processor.max_cstate=	[HW,ACPI]

			Limit processor to maximum C-state

			max_cstate=9 overrides any DMI blacklist limit.

	processor.nocst	[HW,ACPI]

			Ignore the _CST method to determine C-states,

			instead using the legacy FADT method

	profile=	[KNL] Enable kernel profiling via /proc/profile

			Format: [schedule,]<number>

			Param: "schedule" - profile schedule points.

				Requires CONFIG_SCHEDSTATS

			Param: "kvm" - profile VM exits.

	processor.max_cstate=	[HW,ACPI]

			Limit processor to maximum C-state

			max_cstate=9 overrides any DMI blacklist limit.

	processor.nocst	[HW,ACPI]

			Ignore the _CST method to determine C-states,

			instead using the legacy FADT method

	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk

			before loading.

			See Documentation/blockdev/ramdisk.txt.

			allowing boot to proceed.  none ignores them, expecting

			user space to do the scan.

	selinux		[SELINUX] Disable or enable SELinux at boot time.

	security=	[SECURITY] Choose a security module to enable at boot.

			If this boot parameter is not specified, only the first

			security module asking for security registration will be

			loaded. An invalid security module name will be treated

			as if no module has been chosen.

	selinux=	[SELINUX] Disable or enable SELinux at boot time.

			Format: { "0" | "1" }

			See security/selinux/Kconfig help text.

			0 -- disable.

					medium is write-protected).

			Example: quirks=0419:aaf5:rl,0421:0433:rc

	add_efi_memmap	[EFI; x86-32,X86-64] Include EFI memory map in

			kernel's map of available physical RAM.

	vdso=		[X86-32,SH,x86-64]

			vdso=2: enable compat VDSO (default with COMPAT_VDSO)

			vdso=1: enable VDSO (default)

	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.

			Format: <command>

	vt.default_blu=	[VT]

			Format: <blue0>,<blue1>,<blue2>,...,<blue15>

			Change the default blue palette of the console.

			This is a 16-member array composed of values

			ranging from 0-255.

	vt.default_grn=	[VT]

			Format: <green0>,<green1>,<green2>,...,<green15>

			Change the default green palette of the console.

			This is a 16-member array composed of values

			ranging from 0-255.

	vt.default_red=	[VT]

			Format: <red0>,<red1>,<red2>,...,<red15>

			Change the default red palette of the console.

			This is a 16-member array composed of values

			ranging from 0-255.

	vt.default_utf8=

			[VT]

			Format=<0|1>

			Set system-wide default UTF-8 mode for all tty's.

			Default is 1, i.e. UTF-8 mode is enabled for all

			newly opened terminals.

	waveartist=	[HW,OSS]

			Format: <io>,<irq>,<dma>,<dma2>

	wdt=		[WDT] Watchdog

			See Documentation/watchdog/wdt.txt.

	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of

			default x2apic cluster mode on platforms

			supporting x2apic.

	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.

	xd_geo=		See header of drivers/block/xd.c.

			Format:

			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

	norandmaps	Don't use address space randomization.  Equivalent to

			echo 0 > /proc/sys/kernel/randomize_va_space

______________________________________________________________________

TODO: