Loading Documentation/DocBook/device-drivers.tmpl +1 −1 Original line number Original line Diff line number Diff line Loading @@ -227,7 +227,7 @@ X!Isound/sound_firmware.c <chapter id="uart16x50"> <chapter id="uart16x50"> <title>16x50 UART Driver</title> <title>16x50 UART Driver</title> !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/8250/8250.c !Edrivers/tty/serial/8250/8250_core.c </chapter> </chapter> <chapter id="fbdev"> <chapter id="fbdev"> Loading Documentation/kernel-parameters.txt +40 −3 Original line number Original line Diff line number Diff line Loading @@ -596,9 +596,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. is selected automatically. Check is selected automatically. Check Documentation/kdump/kdump.txt for further details. Documentation/kdump/kdump.txt for further details. crashkernel_low=size[KMG] [KNL, x86] parts under 4G. crashkernel=range1:size1[,range2:size2,...][@offset] crashkernel=range1:size1[,range2:size2,...][@offset] [KNL] Same as above, but depends on the memory [KNL] Same as above, but depends on the memory in the running system. The syntax of range is in the running system. The syntax of range is Loading @@ -606,6 +603,26 @@ bytes respectively. Such letter suffixes can also be entirely omitted. a memory unit (amount[KMG]). See also a memory unit (amount[KMG]). See also Documentation/kdump/kdump.txt for an example. Documentation/kdump/kdump.txt for an example. crashkernel=size[KMG],high [KNL, x86_64] range could be above 4G. Allow kernel to allocate physical memory region from top, so could be above 4G if system have more than 4G ram installed. Otherwise memory region will be allocated below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low [KNL, x86_64] range under 4G. When crashkernel=X,high is passed, kernel could allocate physical memory region above 4G, that cause second kernel crash on system that require some amount of low memory, e.g. swiotlb requires at least 64M+32K low memory. Kernel would try to allocate 72M below 4G automatically. This one let user to specify own low range under 4G for second kernel instead. 0: to disable low allocation. It will be ignored when crashkernel=X,high is not used or memory reserved is below 4G. cs89x0_dma= [HW,NET] cs89x0_dma= [HW,NET] Format: <dma> Format: <dma> Loading Loading @@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. edd= [EDD] edd= [EDD] Format: {"off" | "on" | "skip[mbr]"} Format: {"off" | "on" | "skip[mbr]"} efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of your efi variable storage. Use this parameter only if you are really sure that your UEFI does sane gc and fulfills the spec otherwise your board may brick. eisa_irq_edge= [PARISC,HW] eisa_irq_edge= [PARISC,HW] See header of drivers/parisc/eisa.c. See header of drivers/parisc/eisa.c. Loading Loading @@ -1226,6 +1249,20 @@ bytes respectively. Such letter suffixes can also be entirely omitted. iucv= [HW,NET] iucv= [HW,NET] ivrs_ioapic [HW,X86_64] Provide an override to the IOAPIC-ID<->DEVICE-ID mapping provided in the IVRS ACPI table. For example, to map IOAPIC-ID decimal 10 to PCI device 00:14.0 write the parameter as: ivrs_ioapic[10]=00:14.0 ivrs_hpet [HW,X86_64] Provide an override to the HPET-ID<->DEVICE-ID mapping provided in the IVRS ACPI table. For example, to map HPET-ID decimal 0 to PCI device 00:14.0 write the parameter as: ivrs_hpet[0]=00:14.0 js= [HW,JOY] Analog joystick js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. See Documentation/input/joystick.txt. Loading Documentation/networking/ipvs-sysctl.txt +7 −0 Original line number Original line Diff line number Diff line Loading @@ -15,6 +15,13 @@ amemthresh - INTEGER enabled and the variable is automatically set to 2, otherwise enabled and the variable is automatically set to 2, otherwise the strategy is disabled and the variable is set to 1. the strategy is disabled and the variable is set to 1. backup_only - BOOLEAN 0 - disabled (default) not 0 - enabled If set, disable the director function while the server is in backup mode to avoid packet loops for DR/TUN methods. conntrack - BOOLEAN conntrack - BOOLEAN 0 - disabled (default) 0 - disabled (default) not 0 - enabled not 0 - enabled Loading Documentation/scsi/LICENSE.qla2xxx +1 −1 Original line number Original line Diff line number Diff line Copyright (c) 2003-2012 QLogic Corporation Copyright (c) 2003-2013 QLogic Corporation QLogic Linux FC-FCoE Driver QLogic Linux FC-FCoE Driver This program includes a device driver for Linux 3.x. This program includes a device driver for Linux 3.x. Loading Documentation/sound/alsa/ALSA-Configuration.txt +2 −3 Original line number Original line Diff line number Diff line Loading @@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) power_save - Automatic power-saving timeout (in second, 0 = power_save - Automatic power-saving timeout (in second, 0 = disable) disable) power_save_controller - Support runtime D3 of HD-audio controller power_save_controller - Reset HD-audio controller in power-saving mode (-1 = on for supported chip (default), false = off, (default = on) true = force to on even for unsupported hardware) align_buffer_size - Force rounding of buffer/period sizes to multiples align_buffer_size - Force rounding of buffer/period sizes to multiples of 128 bytes. This is more efficient in terms of memory of 128 bytes. This is more efficient in terms of memory access but isn't required by the HDA spec and prevents access but isn't required by the HDA spec and prevents Loading Loading
Documentation/DocBook/device-drivers.tmpl +1 −1 Original line number Original line Diff line number Diff line Loading @@ -227,7 +227,7 @@ X!Isound/sound_firmware.c <chapter id="uart16x50"> <chapter id="uart16x50"> <title>16x50 UART Driver</title> <title>16x50 UART Driver</title> !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/8250/8250.c !Edrivers/tty/serial/8250/8250_core.c </chapter> </chapter> <chapter id="fbdev"> <chapter id="fbdev"> Loading
Documentation/kernel-parameters.txt +40 −3 Original line number Original line Diff line number Diff line Loading @@ -596,9 +596,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. is selected automatically. Check is selected automatically. Check Documentation/kdump/kdump.txt for further details. Documentation/kdump/kdump.txt for further details. crashkernel_low=size[KMG] [KNL, x86] parts under 4G. crashkernel=range1:size1[,range2:size2,...][@offset] crashkernel=range1:size1[,range2:size2,...][@offset] [KNL] Same as above, but depends on the memory [KNL] Same as above, but depends on the memory in the running system. The syntax of range is in the running system. The syntax of range is Loading @@ -606,6 +603,26 @@ bytes respectively. Such letter suffixes can also be entirely omitted. a memory unit (amount[KMG]). See also a memory unit (amount[KMG]). See also Documentation/kdump/kdump.txt for an example. Documentation/kdump/kdump.txt for an example. crashkernel=size[KMG],high [KNL, x86_64] range could be above 4G. Allow kernel to allocate physical memory region from top, so could be above 4G if system have more than 4G ram installed. Otherwise memory region will be allocated below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low [KNL, x86_64] range under 4G. When crashkernel=X,high is passed, kernel could allocate physical memory region above 4G, that cause second kernel crash on system that require some amount of low memory, e.g. swiotlb requires at least 64M+32K low memory. Kernel would try to allocate 72M below 4G automatically. This one let user to specify own low range under 4G for second kernel instead. 0: to disable low allocation. It will be ignored when crashkernel=X,high is not used or memory reserved is below 4G. cs89x0_dma= [HW,NET] cs89x0_dma= [HW,NET] Format: <dma> Format: <dma> Loading Loading @@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. edd= [EDD] edd= [EDD] Format: {"off" | "on" | "skip[mbr]"} Format: {"off" | "on" | "skip[mbr]"} efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of your efi variable storage. Use this parameter only if you are really sure that your UEFI does sane gc and fulfills the spec otherwise your board may brick. eisa_irq_edge= [PARISC,HW] eisa_irq_edge= [PARISC,HW] See header of drivers/parisc/eisa.c. See header of drivers/parisc/eisa.c. Loading Loading @@ -1226,6 +1249,20 @@ bytes respectively. Such letter suffixes can also be entirely omitted. iucv= [HW,NET] iucv= [HW,NET] ivrs_ioapic [HW,X86_64] Provide an override to the IOAPIC-ID<->DEVICE-ID mapping provided in the IVRS ACPI table. For example, to map IOAPIC-ID decimal 10 to PCI device 00:14.0 write the parameter as: ivrs_ioapic[10]=00:14.0 ivrs_hpet [HW,X86_64] Provide an override to the HPET-ID<->DEVICE-ID mapping provided in the IVRS ACPI table. For example, to map HPET-ID decimal 0 to PCI device 00:14.0 write the parameter as: ivrs_hpet[0]=00:14.0 js= [HW,JOY] Analog joystick js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. See Documentation/input/joystick.txt. Loading
Documentation/networking/ipvs-sysctl.txt +7 −0 Original line number Original line Diff line number Diff line Loading @@ -15,6 +15,13 @@ amemthresh - INTEGER enabled and the variable is automatically set to 2, otherwise enabled and the variable is automatically set to 2, otherwise the strategy is disabled and the variable is set to 1. the strategy is disabled and the variable is set to 1. backup_only - BOOLEAN 0 - disabled (default) not 0 - enabled If set, disable the director function while the server is in backup mode to avoid packet loops for DR/TUN methods. conntrack - BOOLEAN conntrack - BOOLEAN 0 - disabled (default) 0 - disabled (default) not 0 - enabled not 0 - enabled Loading
Documentation/scsi/LICENSE.qla2xxx +1 −1 Original line number Original line Diff line number Diff line Copyright (c) 2003-2012 QLogic Corporation Copyright (c) 2003-2013 QLogic Corporation QLogic Linux FC-FCoE Driver QLogic Linux FC-FCoE Driver This program includes a device driver for Linux 3.x. This program includes a device driver for Linux 3.x. Loading
Documentation/sound/alsa/ALSA-Configuration.txt +2 −3 Original line number Original line Diff line number Diff line Loading @@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) power_save - Automatic power-saving timeout (in second, 0 = power_save - Automatic power-saving timeout (in second, 0 = disable) disable) power_save_controller - Support runtime D3 of HD-audio controller power_save_controller - Reset HD-audio controller in power-saving mode (-1 = on for supported chip (default), false = off, (default = on) true = force to on even for unsupported hardware) align_buffer_size - Force rounding of buffer/period sizes to multiples align_buffer_size - Force rounding of buffer/period sizes to multiples of 128 bytes. This is more efficient in terms of memory of 128 bytes. This is more efficient in terms of memory access but isn't required by the HDA spec and prevents access but isn't required by the HDA spec and prevents Loading