Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0c1d1210 authored by Takashi Iwai's avatar Takashi Iwai
Browse files

Merge tag 'asoc-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next 

ASoC: Updates for v3.16

Lots of cleanup work going on in the core this release but very little
visible to external users except for the new drivers that have been
added.

 - Support for specifying aux CODECs in DT.
 - Removal of the deprecated mux and enum macros.
 - More moves towards full componentisation.
 - Removal of some unused I/O code.
 - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
   Haswell and Realtek drivers.
 - Several drivers exposed directly in Kconfig for use with simple-card.
 - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
   ST STA350.
parents 6f51f6cf cee429e5

Documentation/devicetree/bindings/arm/arch_timer.txt

+3 −0
Original line number Diff line number Diff line
@@ -19,6 +19,9 @@ to deliver its interrupts via SPIs. 


- clock-frequency : The frequency of the main counter, in Hz. Optional.



- always-on : a boolean property. If present, the timer is powered through an

  always-on power domain, therefore it never loses context.



Example:



	timer {

Documentation/devicetree/bindings/ata/apm-xgene.txt

+3 −0
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ Required properties: 
  * "sata-phy" for the SATA 6.0Gbps PHY



Optional properties:

- dma-coherent		: Present if dma operations are coherent

- status		: Shall be "ok" if enabled or "disabled" if disabled.

			  Default is "ok".
@@ -55,6 +56,7 @@ Example: 
			      <0x0 0x1f22e000 0x0 0x1000>,

			      <0x0 0x1f227000 0x0 0x1000>;

			interrupts = <0x0 0x87 0x4>;

			dma-coherent;

			status = "ok";

			clocks = <&sataclk 0>;

			phys = <&phy2 0>;
@@ -69,6 +71,7 @@ Example: 
			      <0x0 0x1f23e000 0x0 0x1000>,

			      <0x0 0x1f237000 0x0 0x1000>;

			interrupts = <0x0 0x88 0x4>;

			dma-coherent;

			status = "ok";

			clocks = <&sataclk 0>;

			phys = <&phy3 0>;

Documentation/devicetree/bindings/mfd/mc13xxx.txt

+3 −0
Original line number Diff line number Diff line
@@ -10,6 +10,9 @@ Optional properties: 
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used



Sub-nodes:

- codec: Contain the Audio Codec node.

  - adc-port: Contain PMIC SSI port number used for ADC.

  - dac-port: Contain PMIC SSI port number used for DAC.

- leds : Contain the led nodes and initial register values in property

  "led-control". Number of register depends of used IC, for MC13783 is 6,

  for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of

Documentation/devicetree/bindings/net/arc_emac.txt

+10 −2
Original line number Diff line number Diff line
@@ -4,11 +4,15 @@ Required properties: 
- compatible: Should be "snps,arc-emac"

- reg: Address and length of the register set for the device

- interrupts: Should contain the EMAC interrupts

- clock-frequency: CPU frequency. It is needed to calculate and set polling

period of EMAC.

- max-speed: see ethernet.txt file in the same directory.

- phy: see ethernet.txt file in the same directory.



Clock handling:

The clock frequency is needed to calculate and set polling period of EMAC.

It must be provided by one of:

- clock-frequency: CPU frequency.

- clocks: reference to the clock supplying the EMAC.



Child nodes of the driver are the individual PHY devices connected to the

MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
@@ -19,7 +23,11 @@ Examples: 
		reg = <0xc0fc2000 0x3c>;

		interrupts = <6>;

		mac-address = [ 00 11 22 33 44 55 ];



		clock-frequency = <80000000>;

		/* or */

		clocks = <&emac_clock>;



		max-speed = <100>;

		phy = <&phy0>;

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

+1 −1
Original line number Diff line number Diff line
@@ -23,5 +23,5 @@ gmac0: ethernet@ff700000 { 
	interrupt-names = "macirq";

	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */

	clocks = <&emac_0_clk>;

	clocks-names = "stmmaceth";

	clock-names = "stmmaceth";

};