Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 07423fd8 authored by Yegor Yefremov's avatar Yegor Yefremov Committed by Felipe Balbi
Browse files

Documentation: usb: fix wrong documentation paths 



Fixes wrong spelled "pinctrl-bindings.txt" and "qcom-dwc3-usb-phy.txt"
file names as also wrong specified "mt8173-mtu3.txt" file name.

Signed-off-by: default avatarYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 433def4d

Documentation/devicetree/bindings/usb/dwc3-st.txt

+2 −2
Original line number Diff line number Diff line
@@ -20,10 +20,10 @@ See: Documentation/devicetree/bindings/reset/reset.txt 
   with 'reg' property



 - pinctl-names	: A pinctrl state named "default" must be defined

See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt

See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt



 - pinctrl-0	: Pin control group

See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt

See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt



 - ranges	: allows valid 1:1 translation between child's address space and

		  parent's address space

Documentation/devicetree/bindings/usb/ehci-st.txt

+1 −1
Original line number Diff line number Diff line
@@ -7,7 +7,7 @@ Required properties: 
 - interrupts		: one EHCI interrupt should be described here

 - pinctrl-names	: a pinctrl state named "default" must be defined

 - pinctrl-0		: phandle referencing pin configuration of the USB controller

See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt

See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

 - clocks		: phandle list of usb clocks

 - clock-names		: should be "ic" for interconnect clock and "clk48"

See: Documentation/devicetree/bindings/clock/clock-bindings.txt

Documentation/devicetree/bindings/usb/mt8173-mtu3.txt

+1 −1
Original line number Diff line number Diff line
@@ -30,7 +30,7 @@ Optional properties: 
	"id_float" and "id_ground" are optinal which depends on

	"mediatek,enable-manual-drd"

 - pinctrl-0 : pin control group

	See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt

	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt



 - maximum-speed : valid arguments are "super-speed", "high-speed" and

	"full-speed"; refer to usb/generic.txt

Documentation/devicetree/bindings/usb/mt8173-xhci.txt

+2 −2
Original line number Diff line number Diff line
@@ -37,7 +37,7 @@ Optional properties: 
 - usb3-lpm-capable : supports USB3.0 LPM

 - pinctrl-names : a pinctrl state named "default" must be defined

 - pinctrl-0 : pin control group

	See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt

	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt



Example:

usb30: usb@11270000 {
@@ -67,7 +67,7 @@ usb30: usb@11270000 { 


In the case, xhci is added as subnode to mtu3. An example and the DT binding

details of mtu3 can be found in:

Documentation/devicetree/bindings/usb/mtu3.txt

Documentation/devicetree/bindings/usb/mt8173-mtu3.txt



Required properties:

 - compatible : should contain "mediatek,mt8173-xhci"

Documentation/devicetree/bindings/usb/qcom,dwc3.txt

+1 −1
Original line number Diff line number Diff line
@@ -18,7 +18,7 @@ A child node must exist to represent the core DWC3 IP block. The name of 
the node is not important. The content of the node is defined in dwc3.txt.



Phy documentation is provided in the following places:

Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt

Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt



Example device nodes: