Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 04fedbfb authored by Auke Kok's avatar Auke Kok Committed by Jeff Garzik
Browse files

e1000: reorder e1000_param.c 



This file needs some cleanups and reordering - logically order it
so that relevant defines and code are together with properly quoted
defaults.

Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
parent 6a042dab

drivers/net/e1000/e1000_param.c

+20 −58
Original line number Diff line number Diff line
@@ -44,16 +44,6 @@ 
 */



#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }

/* Module Parameters are always initialized to -1, so that the driver

 * can tell the difference between no user specified value or the

 * user asking for the default value.

 * The true default values are loaded in when e1000_check_options is called.

 *

 * This is a GCC extension to ANSI C.

 * See the item "Labeled Elements in Initializers" in the section

 * "Extensions to the C Language Family" of the GCC documentation.

 */



#define E1000_PARAM(X, desc) \

	static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \

	static int num_##X = 0; \
@@ -67,7 +57,6 @@ 
 *

 * Default Value: 256

 */



E1000_PARAM(TxDescriptors, "Number of transmit descriptors");



/* Receive Descriptor Count
@@ -77,7 +66,6 @@ E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); 
 *

 * Default Value: 256

 */



E1000_PARAM(RxDescriptors, "Number of receive descriptors");



/* User Specified Speed Override
@@ -90,7 +78,6 @@ E1000_PARAM(RxDescriptors, "Number of receive descriptors"); 
 *

 * Default Value: 0

 */



E1000_PARAM(Speed, "Speed setting");



/* User Specified Duplex Override
@@ -102,7 +89,6 @@ E1000_PARAM(Speed, "Speed setting"); 
 *

 * Default Value: 0

 */



E1000_PARAM(Duplex, "Duplex setting");



/* Auto-negotiation Advertisement Override
@@ -119,8 +105,9 @@ E1000_PARAM(Duplex, "Duplex setting"); 
 *

 * Default Value: 0x2F (copper); 0x20 (fiber)

 */



E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");

#define AUTONEG_ADV_DEFAULT  0x2F

#define AUTONEG_ADV_MASK     0x2F



/* User Specified Flow Control Override

 *
@@ -132,8 +119,8 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); 
 *

 * Default Value: Read flow control settings from the EEPROM

 */



E1000_PARAM(FlowControl, "Flow Control setting");

#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL



/* XsumRX - Receive Checksum Offload Enable/Disable

 *
@@ -144,53 +131,54 @@ E1000_PARAM(FlowControl, "Flow Control setting"); 
 *

 * Default Value: 1

 */



E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");



/* Transmit Interrupt Delay in units of 1.024 microseconds

 *  Tx interrupt delay needs to typically be set to something non zero

 *

 * Valid Range: 0-65535

 *

 * Default Value: 64

 */



E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");

#define DEFAULT_TIDV                  64

#define MAX_TXDELAY               0xFFFF

#define MIN_TXDELAY                    0



/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds

 *

 * Valid Range: 0-65535

 *

 * Default Value: 0

 */



E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");

#define DEFAULT_TADV                  64

#define MAX_TXABSDELAY            0xFFFF

#define MIN_TXABSDELAY                 0



/* Receive Interrupt Delay in units of 1.024 microseconds

 *   hardware will likely hang if you set this to anything but zero.

 *

 * Valid Range: 0-65535

 *

 * Default Value: 0

 */



E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");

#define DEFAULT_RDTR                   0

#define MAX_RXDELAY               0xFFFF

#define MIN_RXDELAY                    0



/* Receive Absolute Interrupt Delay in units of 1.024 microseconds

 *

 * Valid Range: 0-65535

 *

 * Default Value: 128

 */



E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");

#define DEFAULT_RADV                 128

#define MAX_RXABSDELAY            0xFFFF

#define MIN_RXABSDELAY                 0



/* Interrupt Throttle Rate (interrupts/sec)

 *

 * Valid Range: 100-100000 (0=off, 1=dynamic)

 *

 * Default Value: 8000

 */



E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");

#define DEFAULT_ITR                 8000

#define MAX_ITR                   100000

#define MIN_ITR                      100



/* Enable Smart Power Down of the PHY

 *
@@ -198,7 +186,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); 
 *

 * Default Value: 0 (disabled)

 */



E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");



/* Enable Kumeran Lock Loss workaround
@@ -207,33 +194,8 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); 
 *

 * Default Value: 1 (enabled)

 */



E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");



#define AUTONEG_ADV_DEFAULT  0x2F

#define AUTONEG_ADV_MASK     0x2F

#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL



#define DEFAULT_RDTR                   0

#define MAX_RXDELAY               0xFFFF

#define MIN_RXDELAY                    0



#define DEFAULT_RADV                 128

#define MAX_RXABSDELAY            0xFFFF

#define MIN_RXABSDELAY                 0



#define DEFAULT_TIDV                  64

#define MAX_TXDELAY               0xFFFF

#define MIN_TXDELAY                    0



#define DEFAULT_TADV                  64

#define MAX_TXABSDELAY            0xFFFF

#define MIN_TXABSDELAY                 0



#define DEFAULT_ITR                 8000

#define MAX_ITR                   100000

#define MIN_ITR                      100



struct e1000_option {

	enum { enable_option, range_option, list_option } type;

	char *name;