powerpc/mpc85xx: Remove P1023 RDS support (fd7e5b7a) · Commits · e / devices / android_kernel_fairphone_FP5

arch/powerpc/boot/dts/p1023rds.dts

deleted100644 → 0

+0 −219

Original line number	Diff line number	Diff line
		/*
		* P1023 RDS Device Tree Source
		*
		* Copyright 2010-2011 Freescale Semiconductor Inc.
		*
		* Author: Roy Zang <tie-fei.zang@freescale.com>
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions are met:
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in the
		* documentation and/or other materials provided with the distribution.
		* * Neither the name of Freescale Semiconductor nor the
		* names of its contributors may be used to endorse or promote products
		* derived from this software without specific prior written permission.
		*
		*
		* ALTERNATIVELY, this software may be distributed under the terms of the
		* GNU General Public License ("GPL") as published by the Free Software
		* Foundation, either version 2 of that License or (at your option) any
		* later version.
		*
		* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
		* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
		* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
		* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
		* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
		* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
		* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		/include/ "fsl/p1023si-pre.dtsi"

		/ {
		model = "fsl,P1023";
		compatible = "fsl,P1023RDS";
		#address-cells = <2>;
		#size-cells = <2>;
		interrupt-parent = <&mpic>;

		memory {
		device_type = "memory";
		};

		soc: soc@ff600000 {
		ranges = <0x0 0x0 0xff600000 0x200000>;

		i2c@3000 {
		rtc@68 {
		compatible = "dallas,ds1374";
		reg = <0x68>;
		};
		};

		spi@7000 {
		fsl_dataflash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "atmel,at45db081d";
		reg = <0>;
		spi-max-frequency = <40000000>; /* input clock */
		partition@u-boot {
		/* 512KB for u-boot Bootloader Image */
		label = "u-boot-spi";
		reg = <0x00000000 0x00080000>;
		read-only;
		};
		partition@dtb {
		/* 512KB for DTB Image */
		label = "dtb-spi";
		reg = <0x00080000 0x00080000>;
		read-only;
		};
		};
		};

		usb@22000 {
		dr_mode = "host";
		phy_type = "ulpi";
		};
		};

		lbc: localbus@ff605000 {
		reg = <0 0xff605000 0 0x1000>;

		/* NOR Flash, BCSR */
		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
		0x1 0x0 0x0 0xe0000000 0x00008000>;

		nor@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "cfi-flash";
		reg = <0x0 0x0 0x02000000>;
		bank-width = <2>;
		device-width = <1>;
		partition@0 {
		label = "ramdisk";
		reg = <0x00000000 0x01c00000>;
		};
		partition@1c00000 {
		label = "kernel";
		reg = <0x01c00000 0x002e0000>;
		};
		partiton@1ee0000 {
		label = "dtb";
		reg = <0x01ee0000 0x00020000>;
		};
		partition@1f00000 {
		label = "firmware";
		reg = <0x01f00000 0x00080000>;
		read-only;
		};
		partition@1f80000 {
		label = "u-boot";
		reg = <0x01f80000 0x00080000>;
		read-only;
		};
		};

		fpga@1,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,p1023rds-fpga";
		reg = <1 0 0x8000>;
		ranges = <0 1 0 0x8000>;

		bcsr@20 {
		compatible = "fsl,p1023rds-bcsr";
		reg = <0x20 0x20>;
		};
		};
		};

		pci0: pcie@ff60a000 {
		reg = <0 0xff60a000 0 0x1000>;
		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
		pcie@0 {
		/* IRQ[0:3] are pulled up on board, set to active-low */
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 0 1 0 0
		0000 0 0 2 &mpic 1 1 0 0
		0000 0 0 3 &mpic 2 1 0 0
		0000 0 0 4 &mpic 3 1 0 0
		>;
		ranges = <0x2000000 0x0 0xc0000000
		0x2000000 0x0 0xc0000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x100000>;
		};
		};

		board_pci1: pci1: pcie@ff609000 {
		reg = <0 0xff609000 0 0x1000>;
		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
		pcie@0 {
		/*
		* IRQ[4:6] only for PCIe, set to active-high,
		* IRQ[7] is pulled up on board, set to active-low
		*/
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 4 2 0 0
		0000 0 0 2 &mpic 5 2 0 0
		0000 0 0 3 &mpic 6 2 0 0
		0000 0 0 4 &mpic 7 1 0 0
		>;
		ranges = <0x2000000 0x0 0xa0000000
		0x2000000 0x0 0xa0000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x100000>;
		};
		};

		pci2: pcie@ff60b000 {
		reg = <0 0xff60b000 0 0x1000>;
		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
		pcie@0 {
		/*
		* IRQ[8:10] are pulled up on board, set to active-low
		* IRQ[11] only for PCIe, set to active-high,
		*/
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 8 1 0 0
		0000 0 0 2 &mpic 9 1 0 0
		0000 0 0 3 &mpic 10 1 0 0
		0000 0 0 4 &mpic 11 2 0 0
		>;
		ranges = <0x2000000 0x0 0x80000000
		0x2000000 0x0 0x80000000
		0x0 0x20000000

		0x1000000 0x0 0x0
		0x1000000 0x0 0x0
		0x0 0x100000>;
		};
		};
		};

		/include/ "fsl/p1023si-post.dtsi"

arch/powerpc/configs/mpc85xx_defconfig

+0 −1

Original line number	Diff line number	Diff line
		@@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y
		CONFIG_P1022_DS=y
		CONFIG_P1022_RDK=y
		CONFIG_P1023_RDB=y
		CONFIG_P1023_RDS=y
		CONFIG_SOCRATES=y
		CONFIG_KSI8560=y
		CONFIG_XES_MPC85xx=y

arch/powerpc/configs/mpc85xx_smp_defconfig

+0 −1

Original line number	Diff line number	Diff line
		@@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y
		CONFIG_P1022_DS=y
		CONFIG_P1022_RDK=y
		CONFIG_P1023_RDB=y
		CONFIG_P1023_RDS=y
		CONFIG_SOCRATES=y
		CONFIG_KSI8560=y
		CONFIG_XES_MPC85xx=y

arch/powerpc/platforms/85xx/Kconfig

+3 −3

Original line number	Diff line number	Diff line
		@@ -117,11 +117,11 @@ config P1022_RDK
		This option enables support for the Freescale / iVeia P1022RDK
		reference board.

		config P1023_RDS
		bool "Freescale P1023 RDS/RDB"
		config P1023_RDB
		bool "Freescale P1023 RDB"
		select DEFAULT_UIMAGE
		help
		This option enables support for the P1023 RDS and RDB boards
		This option enables support for the P1023 RDB board.

		config TWR_P102x
		bool "Freescale TWR-P102x"

arch/powerpc/platforms/85xx/Makefile

+1 −1

Original line number	Diff line number	Diff line
		@@ -17,7 +17,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
		obj-$(CONFIG_P1010_RDB) += p1010rdb.o
		obj-$(CONFIG_P1022_DS) += p1022_ds.o
		obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
		obj-$(CONFIG_P1023_RDS) += p1023_rds.o
		obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
		obj-$(CONFIG_TWR_P102x) += twr_p102x.o
		obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
		obj-$(CONFIG_STX_GP3) += stx_gp3.o