Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f7c4dc2c authored by Russell King's avatar Russell King Committed by Shawn Guo
Browse files

ARM: dts: imx6*-hummingboard2: use proper gpio flags definitions 



Use proper gpio flag definitions for GPIOs rather than using opaque
uninformative numbers.

Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 09294cee

arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi

+5 −5
Original line number Diff line number Diff line
@@ -46,7 +46,7 @@ 


	ir_recv: ir-receiver {

		compatible = "gpio-ir-receiver";

		gpios = <&gpio7 9 1>;

		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;

		linux,rc-map-name = "rc-rc6-mce";
@@ -76,7 +76,7 @@ 
	reg_usbh1_vbus: regulator-usb-h1-vbus {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio1 0 0>;

		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;

		regulator-name = "usb_h1_vbus";
@@ -87,7 +87,7 @@ 
	reg_usbotg_vbus: regulator-usb-otg-vbus {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio3 22 0>;

		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;

		regulator-name = "usb_otg_vbus";
@@ -98,7 +98,7 @@ 
	reg_usbh2_vbus: regulator-usb-h2-vbus {

		compatible = "regulator-gpio";

		enable-active-high;

		enable-gpio = <&gpio2 13 0>;

		enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;

		regulator-name = "usb_h2_vbus";
@@ -110,7 +110,7 @@ 
	reg_usbh3_vbus: regulator-usb-h3-vbus {

		compatible = "regulator-gpio";

		enable-active-high;

		enable-gpio = <&gpio7 10 0>;

		enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;

		regulator-name = "usb_h3_vbus";