Merge "defconfig: sdxlemur: Enable LLCC driver on sdxlemur" (f11438db) · Commits · e / devices / android_kernel_fairphone_FP5

arch/arm/configs/vendor/sdxlemur.config

+2 −0

Original line number	Diff line number	Diff line
		@@ -245,3 +245,5 @@ CONFIG_ATLFWD_FWD=y
		CONFIG_MHI_BUS=y
		CONFIG_MHI_UCI=y
		CONFIG_PCI_QTI=y
		CONFIG_QCOM_LLCC=y
		CONFIG_QCOM_SDXLEMUR_LLCC=y

drivers/soc/qcom/Kconfig

+9 −0

Original line number	Diff line number	Diff line
		@@ -176,6 +176,15 @@ config QCOM_LAHAINA_LLCC
		can start using the LLCC slices.
		If unsure, say n.

		config QCOM_SDXLEMUR_LLCC
		tristate "Qualcomm Technologies, Inc. SDXLEMUR LLCC driver"
		depends on QCOM_LLCC
		help
		Say y or m here to enable the LLCC driver for SDXLEMUR platform.
		This provides data required to configure LLCC so that clients
		can start using the LLCC slices.
		If unsure, say n.

		config QCOM_SHIMA_LLCC
		tristate "Qualcomm Technologies, Inc. SHIMA LLCC driver"
		depends on QCOM_LLCC

drivers/soc/qcom/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -40,6 +40,7 @@ obj-$(CONFIG_QCOM_RUN_QUEUE_STATS) += rq_stats.o
		obj-$(CONFIG_QCOM_APR) += apr.o
		obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
		obj-$(CONFIG_QCOM_LAHAINA_LLCC) += llcc-lahaina.o
		obj-$(CONFIG_QCOM_SDXLEMUR_LLCC) += llcc-sdxlemur.o
		obj-$(CONFIG_QCOM_SHIMA_LLCC) += llcc-shima.o
		obj-$(CONFIG_QCOM_MINIDUMP) += msm_minidump.o minidump_log.o
		obj-$(CONFIG_QCOM_MEM_OFFLINE) += mem-offline.o

drivers/soc/qcom/llcc-sdxlemur.c

0 → 100644

+83 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-only
		/*
		* Copyright (c) 2020, The Linux Foundation. All rights reserved.
		*
		*/

		#include <linux/kernel.h>
		#include <linux/module.h>
		#include <linux/of.h>
		#include <linux/platform_device.h>
		#include <linux/soc/qcom/llcc-qcom.h>

		/*
		* SCT entry contains of the following parameters
		* uid: Unique id for the client's use case
		* slice_id: llcc slice id for each client
		* max_cap: The maximum capacity of the cache slice provided in KB
		* priority: Priority of the client used to select victim line for replacement
		* fixed_size: Determine of the slice has a fixed capacity
		* bonus_ways: Bonus ways to be used by any slice, bonus way is used only if
		* it't not a reserved way.
		* res_ways: Reserved ways for the cache slice, the reserved ways cannot be used
		* by any other client than the one its assigned to.
		* cache_mode: Each slice operates as a cache, this controls the mode of the
		* slice normal or TCM
		* probe_target_ways: Determines what ways to probe for access hit. When
		* configured to 1 only bonus and reserved ways are probed.
		* when configured to 0 all ways in llcc are probed.
		* dis_cap_alloc: Disable capacity based allocation for a client
		* write_scid_en: Bit enables write cache support for a given scid.
		* retain_on_pc: If this bit is set and client has maitained active vote
		* then the ways assigned to this client are not flushed on power
		* collapse.
		* activate_on_init: Activate the slice immidiately after the SCT is programmed
		*/
		#define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
		{ \
		.usecase_id = uid, \
		.slice_id = sid, \
		.max_cap = mc, \
		.priority = p, \
		.fixed_size = fs, \
		.bonus_ways = bway, \
		.res_ways = rway, \
		.cache_mode = cmod, \
		.probe_target_ways = ptw, \
		.dis_cap_alloc = dca, \
		.retain_on_pc = rp, \
		.activate_on_init = a, \
		}

		static struct llcc_slice_config sdxlemur_data[] = {
		SCT_ENTRY(LLCC_MDMHPGRW, 7, 128, 1, 1, 0xF, 0xF, 0, 0, 0, 1, 0),
		SCT_ENTRY(LLCC_MDMHW, 9, 128, 1, 1, 0xF, 0xF, 0, 0, 0, 1, 0),
		SCT_ENTRY(LLCC_MDMVPE, 29, 64, 1, 1, 0xF, 0xF, 0, 0, 0, 1, 0),
		SCT_ENTRY(LLCC_APTCM, 30, 128, 3, 1, 0xF, 0xF, 1, 0, 0, 1, 0),
		SCT_ENTRY(LLCC_MDMCLD2, 25, 128, 1, 1, 0xF, 0xF, 0, 0, 0, 1, 0),
		};

		static int sdxlemur_qcom_llcc_probe(struct platform_device *pdev)
		{
		return qcom_llcc_probe(pdev, sdxlemur_data,
		ARRAY_SIZE(sdxlemur_data));
		}

		static const struct of_device_id sdxlemur_qcom_llcc_of_match[] = {
		{ .compatible = "qcom,sdxlemur-llcc", },
		{ },
		};

		static struct platform_driver sdxlemur_qcom_llcc_driver = {
		.driver = {
		.name = "sdxlemur-llcc",
		.of_match_table = sdxlemur_qcom_llcc_of_match,
		},
		.probe = sdxlemur_qcom_llcc_probe,
		};


		module_platform_driver(sdxlemur_qcom_llcc_driver);

		MODULE_DESCRIPTION("QTI sdxlemur LLCC driver");
		MODULE_LICENSE("GPL v2");

drivers/soc/qcom/llcc-slice.c

+4 −1

Original line number	Diff line number	Diff line
		@@ -392,7 +392,10 @@ int qcom_llcc_probe(struct platform_device *pdev,

		drv_data->bcast_regmap =
		qcom_llcc_init_mmio(pdev, "llcc_broadcast_base");
		if (IS_ERR(drv_data->bcast_regmap)) {

		if (PTR_ERR(drv_data->bcast_regmap) == -ENODEV)
		drv_data->bcast_regmap = drv_data->regmap;
		else if (IS_ERR(drv_data->bcast_regmap)) {
		ret = PTR_ERR(drv_data->bcast_regmap);
		goto err;
		}