Loading drivers/thermal/Kconfig +5 −89 Original line number Diff line number Diff line Loading @@ -326,84 +326,6 @@ config DA9062_THERMAL zone. Compatible with the DA9062 and DA9061 PMICs. config INTEL_POWERCLAMP tristate "Intel PowerClamp idle injection driver" depends on THERMAL depends on X86 depends on CPU_SUP_INTEL help Enable this to enable Intel PowerClamp idle injection driver. This enforce idle time which results in more package C-state residency. The user interface is exposed via generic thermal framework. config X86_PKG_TEMP_THERMAL tristate "X86 package temperature thermal driver" depends on X86_THERMAL_VECTOR select THERMAL_GOV_USER_SPACE select THERMAL_WRITABLE_TRIPS default m help Enable this to register CPU digital sensor for package temperature as thermal zone. Each package will have its own thermal zone. There are two trip points which can be set by user to get notifications via thermal notification methods. config INTEL_SOC_DTS_IOSF_CORE tristate depends on X86 && PCI select IOSF_MBI help This is becoming a common feature for Intel SoCs to expose the additional digital temperature sensors (DTSs) using side band interface (IOSF). This implements the common set of helper functions to register, get temperature and get/set thresholds on DTSs. config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" depends on X86 && PCI && ACPI select INTEL_SOC_DTS_IOSF_CORE select THERMAL_WRITABLE_TRIPS help Enable this to register Intel SoCs (e.g. Bay Trail) platform digital temperature sensor (DTS). These SoCs have two additional DTSs in addition to DTSs on CPU cores. Each DTS will be registered as a thermal zone. There are two trip points. One of the trip point can be set by user mode programs to get notifications via Linux thermal notification methods.The other trip is a critical trip point, which was set by the driver based on the TJ MAX temperature. config INTEL_QUARK_DTS_THERMAL tristate "Intel Quark DTS thermal driver" depends on X86_INTEL_QUARK help Enable this to register Intel Quark SoC (e.g. X1000) platform digital temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. The DTS will be registered as a thermal zone. There are two trip points: hot & critical. The critical trip point default value is set by underlying BIOS/Firmware. menu "ACPI INT340X thermal drivers" source drivers/thermal/int340x_thermal/Kconfig endmenu config INTEL_BXT_PMIC_THERMAL tristate "Intel Broxton PMIC thermal driver" depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP help Select this driver for Intel Broxton PMIC with ADC channels monitoring system temperature measurements and alerts. This driver is used for monitoring the ADC channels of PMIC and handles the alert trip point interrupts and notifies the thermal framework with the trip point and temperature details of the zone. config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI help Enable this to support thermal reporting on certain intel PCHs. Thermal reporting device will provide temperature reading, programmable trip points and other information. config MTK_THERMAL tristate "Temperature sensor driver for mediatek SoCs" depends on ARCH_MEDIATEK || COMPILE_TEST Loading @@ -415,6 +337,11 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs menu "Intel thermal drivers" depends on X86 || X86_INTEL_QUARK || COMPILE_TEST source "drivers/thermal/intel/Kconfig" endmenu menu "Broadcom thermal drivers" depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST source "drivers/thermal/broadcom/Kconfig" Loading Loading @@ -447,17 +374,6 @@ config TANGO_THERMAL source "drivers/thermal/tegra/Kconfig" config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" depends on OF && SPMI && IIO select REGMAP_SPMI help This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) PMIC devices. It shows up in sysfs as a thermal sensor with multiple trip points. The temperature reported by the thermal sensor reflects the real time die temperature if an ADC is present or an estimate of the temperature based upon the over temperature stage value. config GENERIC_ADC_THERMAL tristate "Generic ADC based thermal sensor" depends on IIO Loading drivers/thermal/Makefile +1 −9 Original line number Diff line number Diff line Loading @@ -29,7 +29,6 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o Loading @@ -44,15 +43,8 @@ obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-y += intel/ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-y += st/ obj-$(CONFIG_QCOM_TSENS) += qcom/ obj-y += tegra/ Loading drivers/thermal/intel/Kconfig 0 → 100644 +77 −0 Original line number Diff line number Diff line config INTEL_POWERCLAMP tristate "Intel PowerClamp idle injection driver" depends on THERMAL depends on X86 depends on CPU_SUP_INTEL help Enable this to enable Intel PowerClamp idle injection driver. This enforce idle time which results in more package C-state residency. The user interface is exposed via generic thermal framework. config X86_PKG_TEMP_THERMAL tristate "X86 package temperature thermal driver" depends on X86_THERMAL_VECTOR select THERMAL_GOV_USER_SPACE select THERMAL_WRITABLE_TRIPS default m help Enable this to register CPU digital sensor for package temperature as thermal zone. Each package will have its own thermal zone. There are two trip points which can be set by user to get notifications via thermal notification methods. config INTEL_SOC_DTS_IOSF_CORE tristate depends on X86 && PCI select IOSF_MBI help This is becoming a common feature for Intel SoCs to expose the additional digital temperature sensors (DTSs) using side band interface (IOSF). This implements the common set of helper functions to register, get temperature and get/set thresholds on DTSs. config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" depends on X86 && PCI && ACPI select INTEL_SOC_DTS_IOSF_CORE select THERMAL_WRITABLE_TRIPS help Enable this to register Intel SoCs (e.g. Bay Trail) platform digital temperature sensor (DTS). These SoCs have two additional DTSs in addition to DTSs on CPU cores. Each DTS will be registered as a thermal zone. There are two trip points. One of the trip point can be set by user mode programs to get notifications via Linux thermal notification methods.The other trip is a critical trip point, which was set by the driver based on the TJ MAX temperature. config INTEL_QUARK_DTS_THERMAL tristate "Intel Quark DTS thermal driver" depends on X86_INTEL_QUARK help Enable this to register Intel Quark SoC (e.g. X1000) platform digital temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. The DTS will be registered as a thermal zone. There are two trip points: hot & critical. The critical trip point default value is set by underlying BIOS/Firmware. menu "ACPI INT340X thermal drivers" source drivers/thermal/intel/int340x_thermal/Kconfig endmenu config INTEL_BXT_PMIC_THERMAL tristate "Intel Broxton PMIC thermal driver" depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP help Select this driver for Intel Broxton PMIC with ADC channels monitoring system temperature measurements and alerts. This driver is used for monitoring the ADC channels of PMIC and handles the alert trip point interrupts and notifies the thermal framework with the trip point and temperature details of the zone. config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI help Enable this to support thermal reporting on certain intel PCHs. Thermal reporting device will provide temperature reading, programmable trip points and other information. drivers/thermal/intel/Makefile 0 → 100644 +12 −0 Original line number Diff line number Diff line # SPDX-License-Identifier: GPL-2.0 # # Makefile for various Intel thermal drivers. obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o drivers/thermal/int340x_thermal/Kconfig→drivers/thermal/intel/int340x_thermal/Kconfig +0 −0 File moved. View file Loading
drivers/thermal/Kconfig +5 −89 Original line number Diff line number Diff line Loading @@ -326,84 +326,6 @@ config DA9062_THERMAL zone. Compatible with the DA9062 and DA9061 PMICs. config INTEL_POWERCLAMP tristate "Intel PowerClamp idle injection driver" depends on THERMAL depends on X86 depends on CPU_SUP_INTEL help Enable this to enable Intel PowerClamp idle injection driver. This enforce idle time which results in more package C-state residency. The user interface is exposed via generic thermal framework. config X86_PKG_TEMP_THERMAL tristate "X86 package temperature thermal driver" depends on X86_THERMAL_VECTOR select THERMAL_GOV_USER_SPACE select THERMAL_WRITABLE_TRIPS default m help Enable this to register CPU digital sensor for package temperature as thermal zone. Each package will have its own thermal zone. There are two trip points which can be set by user to get notifications via thermal notification methods. config INTEL_SOC_DTS_IOSF_CORE tristate depends on X86 && PCI select IOSF_MBI help This is becoming a common feature for Intel SoCs to expose the additional digital temperature sensors (DTSs) using side band interface (IOSF). This implements the common set of helper functions to register, get temperature and get/set thresholds on DTSs. config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" depends on X86 && PCI && ACPI select INTEL_SOC_DTS_IOSF_CORE select THERMAL_WRITABLE_TRIPS help Enable this to register Intel SoCs (e.g. Bay Trail) platform digital temperature sensor (DTS). These SoCs have two additional DTSs in addition to DTSs on CPU cores. Each DTS will be registered as a thermal zone. There are two trip points. One of the trip point can be set by user mode programs to get notifications via Linux thermal notification methods.The other trip is a critical trip point, which was set by the driver based on the TJ MAX temperature. config INTEL_QUARK_DTS_THERMAL tristate "Intel Quark DTS thermal driver" depends on X86_INTEL_QUARK help Enable this to register Intel Quark SoC (e.g. X1000) platform digital temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. The DTS will be registered as a thermal zone. There are two trip points: hot & critical. The critical trip point default value is set by underlying BIOS/Firmware. menu "ACPI INT340X thermal drivers" source drivers/thermal/int340x_thermal/Kconfig endmenu config INTEL_BXT_PMIC_THERMAL tristate "Intel Broxton PMIC thermal driver" depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP help Select this driver for Intel Broxton PMIC with ADC channels monitoring system temperature measurements and alerts. This driver is used for monitoring the ADC channels of PMIC and handles the alert trip point interrupts and notifies the thermal framework with the trip point and temperature details of the zone. config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI help Enable this to support thermal reporting on certain intel PCHs. Thermal reporting device will provide temperature reading, programmable trip points and other information. config MTK_THERMAL tristate "Temperature sensor driver for mediatek SoCs" depends on ARCH_MEDIATEK || COMPILE_TEST Loading @@ -415,6 +337,11 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs menu "Intel thermal drivers" depends on X86 || X86_INTEL_QUARK || COMPILE_TEST source "drivers/thermal/intel/Kconfig" endmenu menu "Broadcom thermal drivers" depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST source "drivers/thermal/broadcom/Kconfig" Loading Loading @@ -447,17 +374,6 @@ config TANGO_THERMAL source "drivers/thermal/tegra/Kconfig" config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" depends on OF && SPMI && IIO select REGMAP_SPMI help This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) PMIC devices. It shows up in sysfs as a thermal sensor with multiple trip points. The temperature reported by the thermal sensor reflects the real time die temperature if an ADC is present or an estimate of the temperature based upon the over temperature stage value. config GENERIC_ADC_THERMAL tristate "Generic ADC based thermal sensor" depends on IIO Loading
drivers/thermal/Makefile +1 −9 Original line number Diff line number Diff line Loading @@ -29,7 +29,6 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o Loading @@ -44,15 +43,8 @@ obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-y += intel/ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-y += st/ obj-$(CONFIG_QCOM_TSENS) += qcom/ obj-y += tegra/ Loading
drivers/thermal/intel/Kconfig 0 → 100644 +77 −0 Original line number Diff line number Diff line config INTEL_POWERCLAMP tristate "Intel PowerClamp idle injection driver" depends on THERMAL depends on X86 depends on CPU_SUP_INTEL help Enable this to enable Intel PowerClamp idle injection driver. This enforce idle time which results in more package C-state residency. The user interface is exposed via generic thermal framework. config X86_PKG_TEMP_THERMAL tristate "X86 package temperature thermal driver" depends on X86_THERMAL_VECTOR select THERMAL_GOV_USER_SPACE select THERMAL_WRITABLE_TRIPS default m help Enable this to register CPU digital sensor for package temperature as thermal zone. Each package will have its own thermal zone. There are two trip points which can be set by user to get notifications via thermal notification methods. config INTEL_SOC_DTS_IOSF_CORE tristate depends on X86 && PCI select IOSF_MBI help This is becoming a common feature for Intel SoCs to expose the additional digital temperature sensors (DTSs) using side band interface (IOSF). This implements the common set of helper functions to register, get temperature and get/set thresholds on DTSs. config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" depends on X86 && PCI && ACPI select INTEL_SOC_DTS_IOSF_CORE select THERMAL_WRITABLE_TRIPS help Enable this to register Intel SoCs (e.g. Bay Trail) platform digital temperature sensor (DTS). These SoCs have two additional DTSs in addition to DTSs on CPU cores. Each DTS will be registered as a thermal zone. There are two trip points. One of the trip point can be set by user mode programs to get notifications via Linux thermal notification methods.The other trip is a critical trip point, which was set by the driver based on the TJ MAX temperature. config INTEL_QUARK_DTS_THERMAL tristate "Intel Quark DTS thermal driver" depends on X86_INTEL_QUARK help Enable this to register Intel Quark SoC (e.g. X1000) platform digital temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. The DTS will be registered as a thermal zone. There are two trip points: hot & critical. The critical trip point default value is set by underlying BIOS/Firmware. menu "ACPI INT340X thermal drivers" source drivers/thermal/intel/int340x_thermal/Kconfig endmenu config INTEL_BXT_PMIC_THERMAL tristate "Intel Broxton PMIC thermal driver" depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP help Select this driver for Intel Broxton PMIC with ADC channels monitoring system temperature measurements and alerts. This driver is used for monitoring the ADC channels of PMIC and handles the alert trip point interrupts and notifies the thermal framework with the trip point and temperature details of the zone. config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI help Enable this to support thermal reporting on certain intel PCHs. Thermal reporting device will provide temperature reading, programmable trip points and other information.
drivers/thermal/intel/Makefile 0 → 100644 +12 −0 Original line number Diff line number Diff line # SPDX-License-Identifier: GPL-2.0 # # Makefile for various Intel thermal drivers. obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
drivers/thermal/int340x_thermal/Kconfig→drivers/thermal/intel/int340x_thermal/Kconfig +0 −0 File moved. View file
