Merge "input: touchscreen: nt36xxx: add new touch driver"

# SPDX-License-Identifier: GPL-2.0-only

#

# Novatek NT36xxx touchscreen driver configuration

#

config TOUCHSCREEN_NT36xxx

	bool "Novatek NT36xxx"

	default y

	help

	  Say Y here if you have a Novatek NT36xxx touchscreen connected

	  to your system.

	  If unsure, say N.

# SPDX-License-Identifier: GPL-2.0-only

#

# Makefile for the Novatek NT36xxx touchscreen driver.

#

# Each configuration option enables a list of files.

obj-$(CONFIG_TOUCHSCREEN_NT36xxx) += nt36xxx.o nt36xxx_fw_update.o nt36xxx_ext_proc.o nt36xxx_mp_ctrlram.o

/* SPDX-License-Identifier: GPL-2.0-only */

/*

 * Copyright (C) 2010 - 2018 Novatek, Inc.

 *

 * $Revision: 47247 $

 * $Date: 2019-07-10 10:41:36 +0800 (Wed, 10 Jul 2019) $

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

 * more details.

 *

 */

#ifndef 	_LINUX_NVT_TOUCH_H

#define		_LINUX_NVT_TOUCH_H

#include <linux/delay.h>

#include <linux/i2c.h>

#include <linux/input.h>

#include <linux/uaccess.h>

#ifdef CONFIG_HAS_EARLYSUSPEND

#include <linux/earlysuspend.h>

#endif

#include "nt36xxx_mem_map.h"

#define NVT_DEBUG 1

//---GPIO number---

#define NVTTOUCH_RST_PIN 980

#define NVTTOUCH_INT_PIN 943

//---INT trigger mode---

//#define IRQ_TYPE_EDGE_RISING 1

//#define IRQ_TYPE_EDGE_FALLING 2

#define INT_TRIGGER_TYPE IRQ_TYPE_EDGE_RISING

//---I2C driver info.---

#define NVT_I2C_NAME "NVT-ts"

#define I2C_BLDR_Address 0x01

#define I2C_FW_Address 0x01

#define I2C_HW_Address 0x62

#if NVT_DEBUG

#define NVT_LOG(fmt, args...)    pr_err("[%s] %s %d: " fmt, NVT_I2C_NAME, __func__, __LINE__, ##args)

#else

#define NVT_LOG(fmt, args...)    pr_info("[%s] %s %d: " fmt, NVT_I2C_NAME, __func__, __LINE__, ##args)

#endif

#define NVT_ERR(fmt, args...)    pr_err("[%s] %s %d: " fmt, NVT_I2C_NAME, __func__, __LINE__, ##args)

//---Input device info.---

#define NVT_TS_NAME "NVTCapacitiveTouchScreen"

//---Touch info.---

#define TOUCH_DEFAULT_MAX_WIDTH 1080

#define TOUCH_DEFAULT_MAX_HEIGHT 1920

#define TOUCH_MAX_FINGER_NUM 10

#define TOUCH_KEY_NUM 0

#if TOUCH_KEY_NUM > 0

extern const uint16_t touch_key_array[TOUCH_KEY_NUM];

#endif

#define TOUCH_FORCE_NUM 1000

/* Enable only when module have tp reset pin and connected to host */

#define NVT_TOUCH_SUPPORT_HW_RST 0

//---Customerized func.---

#define NVT_TOUCH_PROC 1

#define NVT_TOUCH_EXT_PROC 1

#define NVT_TOUCH_MP 1

#define MT_PROTOCOL_B 1

#define WAKEUP_GESTURE 1

#if WAKEUP_GESTURE

extern const uint16_t gesture_key_array[];

#endif

#define BOOT_UPDATE_FIRMWARE 0

#define BOOT_UPDATE_FIRMWARE_NAME "novatek_ts_fw.bin"

//---ESD Protect.---

#define NVT_TOUCH_ESD_PROTECT 0

#define NVT_TOUCH_ESD_CHECK_PERIOD 1500	/* ms */

struct nvt_ts_data {

	struct i2c_client *client;

	struct input_dev *input_dev;

	struct delayed_work nvt_fwu_work;

	uint16_t addr;

	int8_t phys[32];

#if defined(CONFIG_FB)

#ifdef _MSM_DRM_NOTIFY_H_

	struct notifier_block drm_notif;

#else

	struct notifier_block fb_notif;

#endif

#elif defined(CONFIG_HAS_EARLYSUSPEND)

	struct early_suspend early_suspend;

#endif

	uint8_t fw_ver;

	uint8_t x_num;

	uint8_t y_num;

	uint16_t abs_x_max;

	uint16_t abs_y_max;

	uint8_t max_touch_num;

	uint8_t max_button_num;

	uint32_t int_trigger_type;

	int32_t irq_gpio;

	uint32_t irq_flags;

	int32_t reset_gpio;

	uint32_t reset_flags;

	struct mutex lock;

	const struct nvt_ts_mem_map *mmap;

	uint8_t carrier_system;

	uint16_t nvt_pid;

	uint8_t xbuf[1025];

	struct mutex xbuf_lock;

	bool irq_enabled;

};

#if NVT_TOUCH_PROC

struct nvt_flash_data{

	rwlock_t lock;

	struct i2c_client *client;

};

#endif

typedef enum {

	RESET_STATE_INIT = 0xA0,// IC reset

	RESET_STATE_REK,        // ReK baseline

	RESET_STATE_REK_FINISH, // baseline is ready

	RESET_STATE_NORMAL_RUN, // normal run

	RESET_STATE_MAX  = 0xAF

} RST_COMPLETE_STATE;

typedef enum {

    EVENT_MAP_HOST_CMD                      = 0x50,

    EVENT_MAP_HANDSHAKING_or_SUB_CMD_BYTE   = 0x51,

    EVENT_MAP_RESET_COMPLETE                = 0x60,

    EVENT_MAP_FWINFO                        = 0x78,

    EVENT_MAP_PROJECTID                     = 0x9A,

} I2C_EVENT_MAP;

//---extern structures---

extern struct nvt_ts_data *ts;

//---extern functions---

extern int32_t CTP_I2C_READ(struct i2c_client *client, uint16_t address, uint8_t *buf, uint16_t len);

extern int32_t CTP_I2C_WRITE(struct i2c_client *client, uint16_t address, uint8_t *buf, uint16_t len);

extern void nvt_bootloader_reset(void);

extern void nvt_sw_reset_idle(void);

extern int32_t nvt_check_fw_reset_state(RST_COMPLETE_STATE check_reset_state);

extern int32_t nvt_get_fw_info(void);

extern int32_t nvt_clear_fw_status(void);

extern int32_t nvt_check_fw_status(void);

extern int32_t nvt_set_page(uint16_t i2c_addr, uint32_t addr);

#if NVT_TOUCH_ESD_PROTECT

extern void nvt_esd_check_enable(uint8_t enable);

#endif /* #if NVT_TOUCH_ESD_PROTECT */

extern void nvt_stop_crc_reboot(void);

#endif /* _LINUX_NVT_TOUCH_H */

// SPDX-License-Identifier: GPL-2.0-only

/*

 * Copyright (C) 2010 - 2018 Novatek, Inc.

 *

 * $Revision: 47247 $

 * $Date: 2019-07-10 10:41:36 +0800 (Wed, 10 Jul 2019) $

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

 * more details.

 *

 */

#include <linux/proc_fs.h>

#include <linux/seq_file.h>

#include "nt36xxx.h"

#if NVT_TOUCH_EXT_PROC

#define NVT_FW_VERSION "nvt_fw_version"

#define NVT_BASELINE "nvt_baseline"

#define NVT_RAW "nvt_raw"

#define NVT_DIFF "nvt_diff"

#define BUS_TRANSFER_LENGTH  64

#define NORMAL_MODE 0x00

#define TEST_MODE_1 0x21

#define TEST_MODE_2 0x22

#define HANDSHAKING_HOST_READY 0xBB

#define XDATA_SECTOR_SIZE   256

static uint8_t xdata_tmp[2048] = {0};

static int32_t xdata[2048] = {0};

static struct proc_dir_entry *NVT_proc_fw_version_entry;

static struct proc_dir_entry *NVT_proc_baseline_entry;

static struct proc_dir_entry *NVT_proc_raw_entry;

static struct proc_dir_entry *NVT_proc_diff_entry;

/*******************************************************

Description:

	Novatek touchscreen change mode function.

return:

	n.a.

*******************************************************/

void nvt_change_mode(uint8_t mode)

{

	uint8_t buf[8] = {0};

	//---set xdata index to EVENT BUF ADDR---

	nvt_set_page(I2C_FW_Address, ts->mmap->EVENT_BUF_ADDR | EVENT_MAP_HOST_CMD);

	//---set mode---

	buf[0] = EVENT_MAP_HOST_CMD;

	buf[1] = mode;

	CTP_I2C_WRITE(ts->client, I2C_FW_Address, buf, 2);

	if (mode == NORMAL_MODE) {

		buf[0] = EVENT_MAP_HANDSHAKING_or_SUB_CMD_BYTE;

		buf[1] = HANDSHAKING_HOST_READY;

		CTP_I2C_WRITE(ts->client, I2C_FW_Address, buf, 2);

		msleep(20);

	}

}

/*******************************************************

Description:

	Novatek touchscreen get firmware pipe function.

return:

	Executive outcomes. 0---pipe 0. 1---pipe 1.

*******************************************************/

uint8_t nvt_get_fw_pipe(void)

{

	uint8_t buf[8]= {0};

	//---set xdata index to EVENT BUF ADDR---

	nvt_set_page(I2C_FW_Address, ts->mmap->EVENT_BUF_ADDR | EVENT_MAP_HANDSHAKING_or_SUB_CMD_BYTE);

	//---read fw status---

	buf[0] = EVENT_MAP_HANDSHAKING_or_SUB_CMD_BYTE;

	buf[1] = 0x00;

	CTP_I2C_READ(ts->client, I2C_FW_Address, buf, 2);

	//NVT_LOG("FW pipe=%d, buf[1]=0x%02X\n", (buf[1]&0x01), buf[1]);

	return (buf[1] & 0x01);

}

/*******************************************************

Description:

	Novatek touchscreen read meta data function.

return:

	n.a.

*******************************************************/

void nvt_read_mdata(uint32_t xdata_addr, uint32_t xdata_btn_addr)

{

	int32_t i = 0;

	int32_t j = 0;

	int32_t k = 0;

	uint8_t buf[BUS_TRANSFER_LENGTH + 1] = {0};

	uint32_t head_addr = 0;

	int32_t dummy_len = 0;

	int32_t data_len = 0;

	int32_t residual_len = 0;

	//---set xdata sector address & length---

	head_addr = xdata_addr - (xdata_addr % XDATA_SECTOR_SIZE);

	dummy_len = xdata_addr - head_addr;

	data_len = ts->x_num * ts->y_num * 2;

	residual_len = (head_addr + dummy_len + data_len) % XDATA_SECTOR_SIZE;

	//printk("head_addr=0x%05X, dummy_len=0x%05X, data_len=0x%05X, residual_len=0x%05X\n", head_addr, dummy_len, data_len, residual_len);

	//read xdata : step 1

	for (i = 0; i < ((dummy_len + data_len) / XDATA_SECTOR_SIZE); i++) {

		//---change xdata index---

		nvt_set_page(I2C_FW_Address, head_addr + XDATA_SECTOR_SIZE * i);

		//---read xdata by BUS_TRANSFER_LENGTH

		for (j = 0; j < (XDATA_SECTOR_SIZE / BUS_TRANSFER_LENGTH); j++) {

			//---read data---

			buf[0] = BUS_TRANSFER_LENGTH * j;

			CTP_I2C_READ(ts->client, I2C_FW_Address, buf, BUS_TRANSFER_LENGTH + 1);

			//---copy buf to xdata_tmp---

			for (k = 0; k < BUS_TRANSFER_LENGTH; k++) {

				xdata_tmp[XDATA_SECTOR_SIZE * i + BUS_TRANSFER_LENGTH * j + k] = buf[k + 1];

				//printk("0x%02X, 0x%04X\n", buf[k+1], (XDATA_SECTOR_SIZE*i + BUS_TRANSFER_LENGTH*j + k));

			}

		}

		//printk("addr=0x%05X\n", (head_addr+XDATA_SECTOR_SIZE*i));

	}

	//read xdata : step2

	if (residual_len != 0) {

		//---change xdata index---

		nvt_set_page(I2C_FW_Address, xdata_addr + data_len - residual_len);

		//---read xdata by BUS_TRANSFER_LENGTH

		for (j = 0; j < (residual_len / BUS_TRANSFER_LENGTH + 1); j++) {

			//---read data---

			buf[0] = BUS_TRANSFER_LENGTH * j;

			CTP_I2C_READ(ts->client, I2C_FW_Address, buf, BUS_TRANSFER_LENGTH + 1);

			//---copy buf to xdata_tmp---

			for (k = 0; k < BUS_TRANSFER_LENGTH; k++) {

				xdata_tmp[(dummy_len + data_len - residual_len) + BUS_TRANSFER_LENGTH * j + k] = buf[k + 1];

				//printk("0x%02X, 0x%04x\n", buf[k+1], ((dummy_len+data_len-residual_len) + BUS_TRANSFER_LENGTH*j + k));

			}

		}

		//printk("addr=0x%05X\n", (xdata_addr+data_len-residual_len));

	}

	//---remove dummy data and 2bytes-to-1data---

	for (i = 0; i < (data_len / 2); i++) {

		xdata[i] = (int16_t)(xdata_tmp[dummy_len + i * 2] + 256 * xdata_tmp[dummy_len + i * 2 + 1]);

	}

#if TOUCH_KEY_NUM > 0

	//read button xdata : step3

	//---change xdata index---

	nvt_set_page(I2C_FW_Address, xdata_btn_addr);

	//---read data---

	buf[0] = (xdata_btn_addr & 0xFF);

	CTP_I2C_READ(ts->client, I2C_FW_Address, buf, (TOUCH_KEY_NUM * 2 + 1));

	//---2bytes-to-1data---

	for (i = 0; i < TOUCH_KEY_NUM; i++) {

		xdata[ts->x_num * ts->y_num + i] = (int16_t)(buf[1 + i * 2] + 256 * buf[1 + i * 2 + 1]);

	}

#endif

	//---set xdata index to EVENT BUF ADDR---

	nvt_set_page(I2C_FW_Address, ts->mmap->EVENT_BUF_ADDR);

}

/*******************************************************

Description:

    Novatek touchscreen get meta data function.

return:

    n.a.

*******************************************************/

void nvt_get_mdata(int32_t *buf, uint8_t *m_x_num, uint8_t *m_y_num)

{

    *m_x_num = ts->x_num;

    *m_y_num = ts->y_num;

    memcpy(buf, xdata, ((ts->x_num * ts->y_num + TOUCH_KEY_NUM) * sizeof(int32_t)));

}

/*******************************************************

Description:

	Novatek touchscreen firmware version show function.

return:

	Executive outcomes. 0---succeed.

*******************************************************/

static int32_t c_fw_version_show(struct seq_file *m, void *v)

{

	seq_printf(m, "fw_ver=%d, x_num=%d, y_num=%d, button_num=%d\n", ts->fw_ver, ts->x_num, ts->y_num, ts->max_button_num);

	return 0;

}

/*******************************************************

Description:

	Novatek touchscreen xdata sequence print show

	function.

return:

	Executive outcomes. 0---succeed.

*******************************************************/

static int32_t c_show(struct seq_file *m, void *v)

{

	int32_t i = 0;

	int32_t j = 0;

	for (i = 0; i < ts->y_num; i++) {

		for (j = 0; j < ts->x_num; j++) {

			seq_printf(m, "%5d, ", xdata[i * ts->x_num + j]);

		}

		seq_puts(m, "\n");

	}

#if TOUCH_KEY_NUM > 0

	for (i = 0; i < TOUCH_KEY_NUM; i++) {

		seq_printf(m, "%5d, ", xdata[ts->x_num * ts->y_num + i]);

	}

	seq_puts(m, "\n");

#endif

	seq_printf(m, "\n\n");

	return 0;

}

/*******************************************************

Description:

	Novatek touchscreen xdata sequence print start

	function.

return:

	Executive outcomes. 1---call next function.

	NULL---not call next function and sequence loop

	stop.

*******************************************************/

static void *c_start(struct seq_file *m, loff_t *pos)

{

	return *pos < 1 ? (void *)1 : NULL;

}

/*******************************************************

Description:

	Novatek touchscreen xdata sequence print next

	function.

return:

	Executive outcomes. NULL---no next and call sequence

	stop function.

*******************************************************/

static void *c_next(struct seq_file *m, void *v, loff_t *pos)

{

	++*pos;

	return NULL;

}

/*******************************************************

Description:

	Novatek touchscreen xdata sequence print stop

	function.

return:

	n.a.

*******************************************************/

static void c_stop(struct seq_file *m, void *v)

{

	return;

}

const struct seq_operations nvt_fw_version_seq_ops = {

	.start  = c_start,

	.next   = c_next,

	.stop   = c_stop,

	.show   = c_fw_version_show

};

const struct seq_operations nvt_seq_ops = {

	.start  = c_start,

	.next   = c_next,

	.stop   = c_stop,

	.show   = c_show

};

/*******************************************************

Description:

	Novatek touchscreen /proc/nvt_fw_version open

	function.

return:

	n.a.

*******************************************************/

static int32_t nvt_fw_version_open(struct inode *inode, struct file *file)

{

	if (mutex_lock_interruptible(&ts->lock)) {

		return -ERESTARTSYS;

	}

	NVT_LOG("++\n");

#if NVT_TOUCH_ESD_PROTECT

	nvt_esd_check_enable(false);

#endif /* #if NVT_TOUCH_ESD_PROTECT */

	if (nvt_get_fw_info()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	mutex_unlock(&ts->lock);

	NVT_LOG("--\n");

	return seq_open(file, &nvt_fw_version_seq_ops);

}

static const struct file_operations nvt_fw_version_fops = {

	.owner = THIS_MODULE,

	.open = nvt_fw_version_open,

	.read = seq_read,

	.llseek = seq_lseek,

	.release = seq_release,

};

/*******************************************************

Description:

	Novatek touchscreen /proc/nvt_baseline open function.

return:

	Executive outcomes. 0---succeed.

*******************************************************/

static int32_t nvt_baseline_open(struct inode *inode, struct file *file)

{

	if (mutex_lock_interruptible(&ts->lock)) {

		return -ERESTARTSYS;

	}

	NVT_LOG("++\n");

#if NVT_TOUCH_ESD_PROTECT

	nvt_esd_check_enable(false);

#endif /* #if NVT_TOUCH_ESD_PROTECT */

	if (nvt_clear_fw_status()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	nvt_change_mode(TEST_MODE_2);

	if (nvt_check_fw_status()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	if (nvt_get_fw_info()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	nvt_read_mdata(ts->mmap->BASELINE_ADDR, ts->mmap->BASELINE_BTN_ADDR);

	nvt_change_mode(NORMAL_MODE);

	mutex_unlock(&ts->lock);

	NVT_LOG("--\n");

	return seq_open(file, &nvt_seq_ops);

}

static const struct file_operations nvt_baseline_fops = {

	.owner = THIS_MODULE,

	.open = nvt_baseline_open,

	.read = seq_read,

	.llseek = seq_lseek,

	.release = seq_release,

};

/*******************************************************

Description:

	Novatek touchscreen /proc/nvt_raw open function.

return:

	Executive outcomes. 0---succeed.

*******************************************************/

static int32_t nvt_raw_open(struct inode *inode, struct file *file)

{

	if (mutex_lock_interruptible(&ts->lock)) {

		return -ERESTARTSYS;

	}

	NVT_LOG("++\n");

#if NVT_TOUCH_ESD_PROTECT

	nvt_esd_check_enable(false);

#endif /* #if NVT_TOUCH_ESD_PROTECT */

	if (nvt_clear_fw_status()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	nvt_change_mode(TEST_MODE_2);

	if (nvt_check_fw_status()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	if (nvt_get_fw_info()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	if (nvt_get_fw_pipe() == 0)

		nvt_read_mdata(ts->mmap->RAW_PIPE0_ADDR, ts->mmap->RAW_BTN_PIPE0_ADDR);

	else

		nvt_read_mdata(ts->mmap->RAW_PIPE1_ADDR, ts->mmap->RAW_BTN_PIPE1_ADDR);

	nvt_change_mode(NORMAL_MODE);

	mutex_unlock(&ts->lock);

	NVT_LOG("--\n");

	return seq_open(file, &nvt_seq_ops);

}

static const struct file_operations nvt_raw_fops = {

	.owner = THIS_MODULE,

	.open = nvt_raw_open,

	.read = seq_read,

	.llseek = seq_lseek,

	.release = seq_release,

};

/*******************************************************

Description:

	Novatek touchscreen /proc/nvt_diff open function.

return:

	Executive outcomes. 0---succeed. negative---failed.

*******************************************************/

static int32_t nvt_diff_open(struct inode *inode, struct file *file)

{

	if (mutex_lock_interruptible(&ts->lock)) {

		return -ERESTARTSYS;

	}

	NVT_LOG("++\n");

#if NVT_TOUCH_ESD_PROTECT

	nvt_esd_check_enable(false);

#endif /* #if NVT_TOUCH_ESD_PROTECT */

	if (nvt_clear_fw_status()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	nvt_change_mode(TEST_MODE_2);

	if (nvt_check_fw_status()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	if (nvt_get_fw_info()) {

		mutex_unlock(&ts->lock);

		return -EAGAIN;

	}

	if (nvt_get_fw_pipe() == 0)

		nvt_read_mdata(ts->mmap->DIFF_PIPE0_ADDR, ts->mmap->DIFF_BTN_PIPE0_ADDR);

	else

		nvt_read_mdata(ts->mmap->DIFF_PIPE1_ADDR, ts->mmap->DIFF_BTN_PIPE1_ADDR);

	nvt_change_mode(NORMAL_MODE);

	mutex_unlock(&ts->lock);

	NVT_LOG("--\n");