Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit e6db06a5 authored by Anton Vorontsov's avatar Anton Vorontsov
Browse files

Merge with upstream to accommodate with thermal changes 



This merge is performed to take commit c56f5c03 ("Thermal: Make
Thermal trip points writeable") out of Linus' tree and then fixup power
supply class. This is needed since thermal stuff added a new argument:

  CC      drivers/power/power_supply_core.o
drivers/power/power_supply_core.c: In function ‘psy_register_thermal’:
drivers/power/power_supply_core.c:204:6: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default]
include/linux/thermal.h:154:29: note: expected ‘int’ but argument is of type ‘struct power_supply *’
drivers/power/power_supply_core.c:204:6: error: too few arguments to function ‘thermal_zone_device_register’
include/linux/thermal.h:154:29: note: declared here
make[1]: *** [drivers/power/power_supply_core.o] Error 1
make: *** [drivers/power/] Error 2

Signed-off-by: default avatarAnton Vorontsov <anton.vorontsov@linaro.org>
parents ecc2edd5 c56f5c03

.mailmap

+1 −0
Original line number Diff line number Diff line
@@ -111,6 +111,7 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> 
Uwe Kleine-König <ukl@pengutronix.de>

Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>

Valdis Kletnieks <Valdis.Kletnieks@vt.edu>

Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>

Takashi YOSHII <takashi.yoshii.zj@renesas.com>

Yusuke Goda <goda.yusuke@renesas.com>

Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/testing/sysfs-block-rssd

+0 −21
Original line number Diff line number Diff line 
What:           /sys/block/rssd*/registers

Date:           March 2012

KernelVersion:  3.3

Contact:        Asai Thambi S P <asamymuthupa@micron.com>

Description:    This is a read-only file. Dumps below driver information and

                hardware registers.

                    - S ACTive

                    - Command Issue

                    - Completed

                    - PORT IRQ STAT

                    - HOST IRQ STAT

                    - Allocated

                    - Commands in Q



What:           /sys/block/rssd*/status

Date:           April 2012

KernelVersion:  3.4

Contact:        Asai Thambi S P <asamymuthupa@micron.com>

Description:    This is a read-only file. Indicates the status of the device.
 


What:           /sys/block/rssd*/flags

Date:           May 2012

KernelVersion:  3.5

Contact:        Asai Thambi S P <asamymuthupa@micron.com>

Description:    This is a read-only file. Dumps the flags in port and driver

                data structure

Documentation/ABI/testing/sysfs-bus-iio

+31 −0
Original line number Diff line number Diff line
@@ -219,6 +219,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale 
What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale

What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale

What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -273,6 +274,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available 
What:		/sys/.../iio:deviceX/in_voltageX_scale_available

What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available

What:		/sys/.../iio:deviceX/out_voltageX_scale_available

What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available

What:		/sys/.../iio:deviceX/in_capacitance_scale_available

KernelVersion:	2.635

Contact:	linux-iio@vger.kernel.org
@@ -298,14 +300,19 @@ Description: 
		gives the 3dB frequency of the filter in Hz.



What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw

KernelVersion:	2.6.37

Contact:	linux-iio@vger.kernel.org

Description:

		Raw (unscaled, no bias etc.) output voltage for

		channel Y.  The number must always be specified and

		unique if the output corresponds to a single channel.

		While DAC like devices typically use out_voltage,

		a continuous frequency generating device, such as

		a DDS or PLL should use out_altvoltage.



What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw

KernelVersion:	2.6.37

Contact:	linux-iio@vger.kernel.org

Description:
@@ -316,6 +323,8 @@ Description: 


What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode

What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode

KernelVersion:	2.6.38

Contact:	linux-iio@vger.kernel.org

Description:
@@ -330,6 +339,8 @@ Description: 


What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available

What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available

What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available

What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available

KernelVersion:	2.6.38

Contact:	linux-iio@vger.kernel.org

Description:
@@ -338,6 +349,8 @@ Description: 


What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown

What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown

What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown

KernelVersion:	2.6.38

Contact:	linux-iio@vger.kernel.org

Description:
@@ -346,6 +359,24 @@ Description: 
		normal operation. Y may be suppressed if all outputs are

		controlled together.



What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency

KernelVersion:	3.4.0

Contact:	linux-iio@vger.kernel.org

Description:

		Output frequency for channel Y in Hz. The number must always be

		specified and unique if the output corresponds to a single

		channel.



What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase

KernelVersion:	3.4.0

Contact:	linux-iio@vger.kernel.org

Description:

		Phase in radians of one frequency/clock output Y

		(out_altvoltageY) relative to another frequency/clock output

		(out_altvoltageZ) of the device X. The number must always be

		specified and unique if the output corresponds to a single

		channel.



What:		/sys/bus/iio/devices/iio:deviceX/events

KernelVersion:	2.6.35

Contact:	linux-iio@vger.kernel.org

Documentation/ABI/testing/sysfs-class-mtd

+9 −8
Original line number Diff line number Diff line
@@ -142,13 +142,14 @@ KernelVersion: 3.4 
Contact:	linux-mtd@lists.infradead.org

Description:

		This allows the user to examine and adjust the criteria by which

		mtd returns -EUCLEAN from mtd_read().  If the maximum number of

		bit errors that were corrected on any single region comprising

		an ecc step (as reported by the driver) equals or exceeds this

		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is

		returned.  Higher layers (e.g., UBI) use this return code as an

		indication that an erase block may be degrading and should be

		scrutinized as a candidate for being marked as bad.

		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the

		maximum number of bit errors that were corrected on any single

		region comprising an ecc step (as reported by the driver) equals

		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent

		an error, 0 is returned.  Higher layers (e.g., UBI) use this

		return code as an indication that an erase block may be

		degrading and should be scrutinized as a candidate for being

		marked as bad.



		The initial value may be specified by the flash device driver.

		If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@ Description: 
		block degradation, but high enough to avoid the consequences of

		a persistent return value of -EUCLEAN on devices where sticky

		bitflips occur.  Note that if bitflip_threshold exceeds

		ecc_strength, -EUCLEAN is never returned by mtd_read().

		ecc_strength, -EUCLEAN is never returned by the read operations.

		Conversely, if bitflip_threshold is zero, -EUCLEAN is always

		returned, absent a hard error.

Documentation/DocBook/media/v4l/controls.xml

+1 −1
Original line number Diff line number Diff line
@@ -3988,7 +3988,7 @@ interface and may change in the future.</para> 
	    from RGB to Y'CbCr color space.

	    </entry>

	  </row>

	  <row id = "v4l2-jpeg-chroma-subsampling">

	  <row>

	    <entrytbl spanname="descr" cols="2">

	      <tbody valign="top">

		<row>