Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit dfcf8196 authored by Jens Kuske's avatar Jens Kuske Committed by Maxime Ripard
Browse files

ARM: dts: sun8i: Add Orange Pi Plus support 



The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
and a 40-pin GPIO header.

Signed-off-by: default avatarJens Kuske <jenskuske@gmail.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 318d93bc

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -661,7 +661,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ 
	sun8i-a33-ga10h-v1.1.dtb \

	sun8i-a33-ippo-q8h-v1.2.dtb \

	sun8i-a33-q8-tablet.dtb \

	sun8i-a33-sinlinx-sina33.dtb

	sun8i-a33-sinlinx-sina33.dtb \

	sun8i-h3-orangepi-plus.dtb

dtb-$(CONFIG_MACH_SUN9I) += \

	sun9i-a80-optimus.dtb \

	sun9i-a80-cubieboard4.dtb

arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts

0 → 100644
+77 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun8i-h3.dtsi"

#include "sunxi-common-regulators.dtsi"



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	model = "Xunlong Orange Pi Plus";

	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";



	aliases {

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */

	cd-inverted;

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};