Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit dd31ba30 authored by Wenjun Zhang's avatar Wenjun Zhang
Browse files

ARM: dts: msm: enable lt9611uxc for hdk8350 

Add lt9611uxc pincttl and dts configure.

Change-Id: I9c559051a4779e3b41c6cdc941c3f7fa00765e24
parent 840b38c0

qcom/lahaina-hdk.dtsi

+103 −0
Original line number Diff line number Diff line
@@ -81,3 +81,106 @@ 
&sdhc_2 {

	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;

};



&qupv3_se15_i2c {

	status = "ok";



	lt9611: lt,lt9611@2b {

		compatible = "lt,lt9611uxc";

		reg = <0x2b>;

		interrupt-parent = <&tlmm>;

		interrupts = <50 0>;

		interrupt-names = "lt_irq";

		lt,irq-gpio = <&tlmm 50 0x0>;

		lt,reset-gpio = <&tlmm 48 0x0>;

		lt,hdmi-3p3-en = <&tlmm 47 0x0>;

		lt,hdmi-1p2-en = <&tlmm 49 0x0>;

		lt,non-pluggable;



		pinctrl-names = "default";

		pinctrl-0 = <&lt9611_pins>;



		lt,preferred-mode = "1920x1080";



		lt,customize-modes {

			lt,customize-mode-id@0 {

				lt,mode-h-active = <1920>;

				lt,mode-h-front-porch = <88>;

				lt,mode-h-pulse-width = <44>;

				lt,mode-h-back-porch = <148>;

				lt,mode-h-active-high;

				lt,mode-v-active = <1080>;

				lt,mode-v-front-porch = <4>;

				lt,mode-v-pulse-width = <5>;

				lt,mode-v-back-porch = <36>;

				lt,mode-v-active-high;

				lt,mode-refresh-rate = <60>;

				lt,mode-clock-in-khz = <148500>;

			};



			lt,customize-mode-id@1 {

				lt,mode-h-active = <3840>;

				lt,mode-h-front-porch = <176>;

				lt,mode-h-pulse-width = <88>;

				lt,mode-h-back-porch = <400>;

				lt,mode-h-active-high;

				lt,mode-v-active = <2160>;

				lt,mode-v-front-porch = <8>;

				lt,mode-v-pulse-width = <10>;

				lt,mode-v-back-porch = <72>;

				lt,mode-v-active-high;

				lt,mode-refresh-rate = <60>;

				lt,mode-clock-in-khz = <608040>;

			};

		};



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				lt9611_in_0: endpoint {

					remote-endpoint = <&ext_dsi_0_out>;

				};

			};



			port@1 {

				reg = <1>;

				lt9611_in_1: endpoint {

					remote-endpoint = <&ext_dsi_1_out>;

				};

			};

		};

	};

};



&sde_dsi {

	qcom,dsi-default-panel = <&dsi_ext_bridge_1080p>;



	ports {

		#address-cells = <1>;

		#size-cells = <0>;



		port@0 {

			reg = <0>;

			ext_dsi_0_out: endpoint {

				remote-endpoint = <&lt9611_in_0>;

			};

		};

	};

};



&sde_dsi1 {

	ports {

		#address-cells = <1>;

		#size-cells = <0>;



		port@1 {

			reg = <1>;

			ext_dsi_1_out: endpoint {

				remote-endpoint = <&lt9611_in_1>;

			};

		};

	};

};

qcom/lahaina-pinctrl.dtsi

+13 −0
Original line number Diff line number Diff line
@@ -380,6 +380,19 @@ 
		};

	};



	lt9611_pins: lt9611_pins {

		mux {

			pins = "gpio47", "gpio48", "gpio49", "gpio50";

			function = "gpio";

		};



		config {

			pins = "gpio47", "gpio48", "gpio49", "gpio50";

			drive-strength = <8>;

			bias-disable = <0>;

		};

	};



	nfc {

			nfc_int_active: nfc_int_active {

				/* active state */