Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit dc3e0aa5 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Greg Kroah-Hartman
Browse files

misc: remove redundant 'default n' from Kconfig-s 



'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: default avatarFrederic Barrat <fbarrat@linux.ibm.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b728ddde

drivers/misc/Kconfig

+0 −10
Original line number Diff line number Diff line
@@ -8,7 +8,6 @@ config SENSORS_LIS3LV02D 
	tristate

	depends on INPUT

	select INPUT_POLLDEV

	default n



config AD525X_DPOT

	tristate "Analog Devices Digital Potentiometers"
@@ -61,7 +60,6 @@ config ATMEL_TCLIB 


config DUMMY_IRQ

	tristate "Dummy IRQ handler"

	default n

	---help---

	  This module accepts a single 'irq' parameter, which it should register for.

	  The sole purpose of this module is to help with debugging of systems on
@@ -117,7 +115,6 @@ config PHANTOM 
config INTEL_MID_PTI

	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"

	depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)

	default n

	help

	  The PTI (Parallel Trace Interface) driver directs

	  trace data routed from various parts in the system out
@@ -193,7 +190,6 @@ config ATMEL_SSC 


config ENCLOSURE_SERVICES

	tristate "Enclosure Services"

	default n

	help

	  Provides support for intelligent enclosures (bays which

	  contain storage devices).  You also need either a host
@@ -217,7 +213,6 @@ config SGI_XP 
config CS5535_MFGPT

	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"

	depends on MFD_CS5535

	default n

	help

	  This driver provides access to MFGPT functionality for other

	  drivers that need timers.  MFGPTs are available in the CS5535 and
@@ -250,7 +245,6 @@ config CS5535_CLOCK_EVENT_SRC 
config HP_ILO

	tristate "Channel interface driver for the HP iLO processor"

	depends on PCI

	default n

	help

	  The channel interface driver allows applications to communicate

	  with iLO management processors present on HP ProLiant servers.
@@ -285,7 +279,6 @@ config QCOM_FASTRPC 
config SGI_GRU

	tristate "SGI GRU driver"

	depends on X86_UV && SMP

	default n

	select MMU_NOTIFIER

	---help---

	The GRU is a hardware resource located in the system chipset. The GRU
@@ -300,7 +293,6 @@ config SGI_GRU 
config SGI_GRU_DEBUG

	bool  "SGI GRU driver debug"

	depends on SGI_GRU

	default n

	---help---

	This option enables additional debugging code for the SGI GRU driver.

	If you are unsure, say N.
@@ -358,7 +350,6 @@ config SENSORS_BH1770 
config SENSORS_APDS990X

	 tristate "APDS990X combined als and proximity sensors"

	 depends on I2C

	 default n

	 ---help---

	   Say Y here if you want to build a driver for Avago APDS990x

	   combined ambient light and proximity sensor chip.
@@ -386,7 +377,6 @@ config DS1682 
config SPEAR13XX_PCIE_GADGET

	bool "PCIe gadget support for SPEAr13XX platform"

	depends on ARCH_SPEAR13XX && BROKEN

	default n

	help

	 This option enables gadget support for PCIe controller. If

	 board file defines any controller as PCIe endpoint then a sysfs

drivers/misc/altera-stapl/Kconfig

+0 −1
Original line number Diff line number Diff line
@@ -4,6 +4,5 @@ comment "Altera FPGA firmware download module (requires I2C)" 
config ALTERA_STAPL

	tristate "Altera FPGA firmware download module"

	depends on I2C

	default n

	help

	  An Altera FPGA module. Say Y when you want to support this tool.

drivers/misc/c2port/Kconfig

+0 −2
Original line number Diff line number Diff line
@@ -4,7 +4,6 @@ 


menuconfig C2PORT

	tristate "Silicon Labs C2 port support"

	default n

	help

	  This option enables support for Silicon Labs C2 port used to

	  program Silicon micro controller chips (and other 8051 compatible).
@@ -23,7 +22,6 @@ if C2PORT 
config C2PORT_DURAMAR_2150

	tristate "C2 port support for Eurotech's Duramar 2150"

	depends on X86

	default n

	help

	  This option enables C2 support for the Eurotech's Duramar 2150

	  on board micro controller.

drivers/misc/cb710/Kconfig

+0 −1
Original line number Diff line number Diff line
@@ -14,7 +14,6 @@ config CB710_CORE 
config CB710_DEBUG

	bool "Enable driver debugging"

	depends on CB710_CORE != n

	default n

	help

	  This is an option for use by developers; most people should

	  say N here.  This adds a lot of debugging output to dmesg.

drivers/misc/cxl/Kconfig

+0 −3
Original line number Diff line number Diff line
@@ -4,16 +4,13 @@ 


config CXL_BASE

	bool

	default n

	select PPC_COPRO_BASE



config CXL_AFU_DRIVER_OPS

	bool

	default n



config CXL_LIB

	bool

	default n



config CXL

	tristate "Support for IBM Coherent Accelerators (CXL)"