Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit db6f3007 authored by Steven Walter's avatar Steven Walter Committed by David S. Miller
Browse files

tulip: implement wake-on-lan support 

Based on a patch from http://simon.baatz.info/wol-support-for-an983b/



Tested to resume from suspend by magic packet.

Signed-off-by: default avatarSteven Walter <stevenrwalter@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7a1d7f01

drivers/net/tulip/tulip.h

+48 −16
Original line number Diff line number Diff line
@@ -20,6 +20,7 @@ 
#include <linux/types.h>

#include <linux/spinlock.h>

#include <linux/netdevice.h>

#include <linux/ethtool.h>

#include <linux/timer.h>

#include <linux/delay.h>

#include <linux/pci.h>
@@ -51,22 +52,23 @@ struct tulip_chip_table { 




enum tbl_flag {

	HAS_MII			= 0x0001,

	HAS_MEDIA_TABLE		= 0x0002,

	CSR12_IN_SROM		= 0x0004,

	ALWAYS_CHECK_MII	= 0x0008,

	HAS_ACPI		= 0x0010,

	MC_HASH_ONLY		= 0x0020, /* Hash-only multicast filter. */

	HAS_PNICNWAY		= 0x0080,

	HAS_NWAY		= 0x0040, /* Uses internal NWay xcvr. */

	HAS_INTR_MITIGATION	= 0x0100,

	IS_ASIX			= 0x0200,

	HAS_8023X		= 0x0400,

	COMET_MAC_ADDR		= 0x0800,

	HAS_PCI_MWI		= 0x1000,

	HAS_PHY_IRQ		= 0x2000,

	HAS_SWAPPED_SEEPROM	= 0x4000,

	NEEDS_FAKE_MEDIA_TABLE	= 0x8000,

	HAS_MII			= 0x00001,

	HAS_MEDIA_TABLE		= 0x00002,

	CSR12_IN_SROM		= 0x00004,

	ALWAYS_CHECK_MII	= 0x00008,

	HAS_ACPI		= 0x00010,

	MC_HASH_ONLY		= 0x00020, /* Hash-only multicast filter. */

	HAS_PNICNWAY		= 0x00080,

	HAS_NWAY		= 0x00040, /* Uses internal NWay xcvr. */

	HAS_INTR_MITIGATION	= 0x00100,

	IS_ASIX			= 0x00200,

	HAS_8023X		= 0x00400,

	COMET_MAC_ADDR		= 0x00800,

	HAS_PCI_MWI		= 0x01000,

	HAS_PHY_IRQ		= 0x02000,

	HAS_SWAPPED_SEEPROM	= 0x04000,

	NEEDS_FAKE_MEDIA_TABLE	= 0x08000,

	COMET_PM		= 0x10000,

};
@@ -120,6 +122,11 @@ enum tulip_offsets { 
	CSR13 = 0x68,

	CSR14 = 0x70,

	CSR15 = 0x78,

	CSR18 = 0x88,

	CSR19 = 0x8c,

	CSR20 = 0x90,

	CSR27 = 0xAC,

	CSR28 = 0xB0,

};



/* register offset and bits for CFDD PCI config reg */
@@ -289,6 +296,30 @@ enum t21143_csr6_bits { 
	csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd),

};



enum tulip_comet_csr13_bits {

/* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they

 * determine which link status transition wakes up if LSCE is

 * enabled */

        comet_csr13_linkoffe = (1 << 17),

        comet_csr13_linkone = (1 << 16),

        comet_csr13_wfre = (1 << 10),

        comet_csr13_mpre = (1 << 9),

        comet_csr13_lsce = (1 << 8),

        comet_csr13_wfr = (1 << 2),

        comet_csr13_mpr = (1 << 1),

        comet_csr13_lsc = (1 << 0),

};



enum tulip_comet_csr18_bits {

        comet_csr18_pmes_sticky = (1 << 24),

        comet_csr18_pm_mode = (1 << 19),

        comet_csr18_apm_mode = (1 << 18),

        comet_csr18_d3a = (1 << 7)

};



enum tulip_comet_csr20_bits {

        comet_csr20_pmes = (1 << 15),

};



/* Keep the ring sizes a power of two for efficiency.

   Making the Tx ring too large decreases the effectiveness of channel
@@ -411,6 +442,7 @@ struct tulip_private { 
	unsigned int csr6;	/* Current CSR6 control settings. */

	unsigned char eeprom[EEPROM_SIZE];	/* Serial EEPROM contents. */

	void (*link_change) (struct net_device * dev, int csr5);

        struct ethtool_wolinfo wolinfo;        /* WOL settings */

	u16 sym_advertise, mii_advertise; /* NWay capabilities advertised.  */

	u16 lpar;		/* 21143 Link partner ability. */

	u16 advertising[4];

drivers/net/tulip/tulip_core.c

+108 −7
Original line number Diff line number Diff line
@@ -30,7 +30,6 @@ 
#include <linux/etherdevice.h>

#include <linux/delay.h>

#include <linux/mii.h>

#include <linux/ethtool.h>

#include <linux/crc32.h>

#include <asm/unaligned.h>

#include <asm/uaccess.h>
@@ -272,6 +271,7 @@ static void tulip_down(struct net_device *dev); 
static struct net_device_stats *tulip_get_stats(struct net_device *dev);

static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);

static void set_rx_mode(struct net_device *dev);

static void tulip_set_wolopts(struct pci_dev *pdev, u32 wolopts);

#ifdef CONFIG_NET_POLL_CONTROLLER

static void poll_tulip(struct net_device *dev);

#endif
@@ -309,6 +309,11 @@ static void tulip_up(struct net_device *dev) 
	/* Wake the chip from sleep/snooze mode. */

	tulip_set_power_state (tp, 0, 0);



	/* Disable all WOL events */

	pci_enable_wake(tp->pdev, PCI_D3hot, 0);

	pci_enable_wake(tp->pdev, PCI_D3cold, 0);

	tulip_set_wolopts(tp->pdev, 0);



	/* On some chip revs we must set the MII/SYM port before the reset!? */

	if (tp->mii_cnt  ||  (tp->mtable  &&  tp->mtable->has_mii))

		iowrite32(0x00040000, ioaddr + CSR6);
@@ -345,8 +350,8 @@ static void tulip_up(struct net_device *dev) 
		} else if (tp->flags & COMET_MAC_ADDR) {

			iowrite32(addr_low,  ioaddr + 0xA4);

			iowrite32(addr_high, ioaddr + 0xA8);

			iowrite32(0, ioaddr + 0xAC);

			iowrite32(0, ioaddr + 0xB0);

			iowrite32(0, ioaddr + CSR27);

			iowrite32(0, ioaddr + CSR28);

		}

	} else {

		/* This is set_rx_mode(), but without starting the transmitter. */
@@ -876,8 +881,35 @@ static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *in 
	strcpy(info->bus_info, pci_name(np->pdev));

}





static int tulip_ethtool_set_wol(struct net_device *dev,

				 struct ethtool_wolinfo *wolinfo)

{

	struct tulip_private *tp = netdev_priv(dev);



	if (wolinfo->wolopts & (~tp->wolinfo.supported))

		   return -EOPNOTSUPP;



	tp->wolinfo.wolopts = wolinfo->wolopts;

	device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts);

	return 0;

}



static void tulip_ethtool_get_wol(struct net_device *dev,

				  struct ethtool_wolinfo *wolinfo)

{

	struct tulip_private *tp = netdev_priv(dev);



	wolinfo->supported = tp->wolinfo.supported;

	wolinfo->wolopts = tp->wolinfo.wolopts;

	return;

}





static const struct ethtool_ops ops = {

	.get_drvinfo = tulip_get_drvinfo

	.get_drvinfo = tulip_get_drvinfo,

	.set_wol     = tulip_ethtool_set_wol,

	.get_wol     = tulip_ethtool_get_wol,

};



/* Provide ioctl() calls to examine the MII xcvr state. */
@@ -1093,8 +1125,8 @@ static void set_rx_mode(struct net_device *dev) 
				iowrite32(3, ioaddr + CSR13);

				iowrite32(mc_filter[1], ioaddr + CSR14);

			} else if (tp->flags & COMET_MAC_ADDR) {

				iowrite32(mc_filter[0], ioaddr + 0xAC);

				iowrite32(mc_filter[1], ioaddr + 0xB0);

				iowrite32(mc_filter[0], ioaddr + CSR27);

				iowrite32(mc_filter[1], ioaddr + CSR28);

			}

			tp->mc_filter[0] = mc_filter[0];

			tp->mc_filter[1] = mc_filter[1];
@@ -1434,6 +1466,19 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, 


	tp->chip_id = chip_idx;

	tp->flags = tulip_tbl[chip_idx].flags;



	tp->wolinfo.supported = 0;

	tp->wolinfo.wolopts = 0;

	/* COMET: Enable power management only for AN983B */

	if (chip_idx == COMET ) {

		u32 sig;

		pci_read_config_dword (pdev, 0x80, &sig);

		if (sig == 0x09811317) {

			tp->flags |= COMET_PM;

			tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC;

			printk(KERN_INFO "tulip_init_one: Enabled WOL support for AN983B\n");

		}

	}

	tp->pdev = pdev;

	tp->base_addr = ioaddr;

	tp->revision = pdev->revision;
@@ -1766,11 +1811,43 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, 
}





/* set the registers according to the given wolopts */

static void tulip_set_wolopts (struct pci_dev *pdev, u32 wolopts)

{

	struct net_device *dev = pci_get_drvdata(pdev);

	struct tulip_private *tp = netdev_priv(dev);

	void __iomem *ioaddr = tp->base_addr;



	if (tp->flags & COMET_PM) {

	  

		unsigned int tmp;

			

		tmp = ioread32(ioaddr + CSR18);

		tmp &= ~(comet_csr18_pmes_sticky | comet_csr18_apm_mode | comet_csr18_d3a);

		tmp |= comet_csr18_pm_mode;

		iowrite32(tmp, ioaddr + CSR18);

			

		/* Set the Wake-up Control/Status Register to the given WOL options*/

		tmp = ioread32(ioaddr + CSR13);

		tmp &= ~(comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_wfre | comet_csr13_lsce | comet_csr13_mpre);

		if (wolopts & WAKE_MAGIC)

			tmp |= comet_csr13_mpre;

		if (wolopts & WAKE_PHY)

			tmp |= comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_lsce;

		/* Clear the event flags */

		tmp |= comet_csr13_wfr | comet_csr13_mpr | comet_csr13_lsc;

		iowrite32(tmp, ioaddr + CSR13);

	}

}



#ifdef CONFIG_PM





static int tulip_suspend (struct pci_dev *pdev, pm_message_t state)

{

	pci_power_t pstate;

	struct net_device *dev = pci_get_drvdata(pdev);

	struct tulip_private *tp = netdev_priv(dev);



	if (!dev)

		return -EINVAL;
@@ -1786,7 +1863,16 @@ static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) 
save_state:

	pci_save_state(pdev);

	pci_disable_device(pdev);

	pci_set_power_state(pdev, pci_choose_state(pdev, state));

	pstate = pci_choose_state(pdev, state);

	if (state.event == PM_EVENT_SUSPEND && pstate != PCI_D0) {

		int rc;



		tulip_set_wolopts(pdev, tp->wolinfo.wolopts);

		rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts);

		if (rc)

			printk("tulip: pci_enable_wake failed (%d)\n", rc);

	}

	pci_set_power_state(pdev, pstate);



	return 0;

}
@@ -1795,7 +1881,10 @@ static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) 
static int tulip_resume(struct pci_dev *pdev)

{

	struct net_device *dev = pci_get_drvdata(pdev);

	struct tulip_private *tp = netdev_priv(dev);

	void __iomem *ioaddr = tp->base_addr;

	int retval;

	unsigned int tmp;



	if (!dev)

		return -EINVAL;
@@ -1816,6 +1905,18 @@ static int tulip_resume(struct pci_dev *pdev) 
		return retval;

	}



	if (tp->flags & COMET_PM) {

		pci_enable_wake(pdev, PCI_D3hot, 0);

		pci_enable_wake(pdev, PCI_D3cold, 0);



		/* Clear the PMES flag */

		tmp = ioread32(ioaddr + CSR20);

		tmp |= comet_csr20_pmes;

		iowrite32(tmp, ioaddr + CSR20);



		/* Disable all wake-up events */

		tulip_set_wolopts(pdev, 0);

	}

	netif_device_attach(dev);



	if (netif_running(dev))