[MIPS] Yosemite: Fix warnings in i2c-yoesmite by deleting the unused code.

# Makefile for the PMC-Sierra Titan

# Makefile for the PMC-Sierra Titan

#

#

obj-y    += irq.o i2c-yosemite.o prom.o py-console.o setup.o

obj-y    += irq.o prom.o py-console.o setup.o

obj-$(CONFIG_KGDB)		+= dbg_io.o

obj-$(CONFIG_KGDB)		+= dbg_io.o

obj-$(CONFIG_SMP)		+= smp.o

obj-$(CONFIG_SMP)		+= smp.o

EXTRA_CFLAGS += -Werror

/*

 *  Copyright (C) 2003 PMC-Sierra Inc.

 *  Author: Manish Lachwani (lachwani@pmc-sierra.com)

 *

 *  This program is free software; you can redistribute  it and/or modify it

 *  under  the terms of  the GNU General  Public License as published by the

 *  Free Software Foundation;  either version 2 of the  License, or (at your

 *  option) any later version.

 *

 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED

 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF

 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN

 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,

 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF

 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT

 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 *

 *  You should have received a copy of the  GNU General Public License along

 *  with this program; if not, write  to the Free Software Foundation, Inc.,

 *  675 Mass Ave, Cambridge, MA 02139, USA.

 */

/*

 * Detailed Description:

 *

 * This block implements the I2C interface to the slave devices like the

 * Atmel 24C32 EEPROM and the MAX 1619 Sensors device. The I2C Master interface

 * can be controlled by the SCMB block. And the SCMB block kicks in only when

 * using the Ethernet Mode of operation and __not__ the SysAD mode

 *

 * The SCMB controls the two modes: MDIO and the I2C. The MDIO mode is used to

 * communicate with the Quad-PHY from Marvel. The I2C is used to communicate

 * with the I2C slave devices.  It seems that the driver does not explicitly

 * deal with the control of SDA and SCL serial lines. So, the driver will set

 * the slave address, drive the command and then the data.  The SCMB will then

 * control the two serial lines as required.

 *

 * It seems the documents are very unclear abt this. Hence, I took some time

 * out to write the desciption to have an idea of how the I2C can actually

 * work. Currently, this Linux driver wont be integrated into the generic Linux

 * I2C framework. And finally, the I2C interface is also known as the 2BI

 * interface. 2BI means 2-bit interface referring to SDA and SCL serial lines

 * respectively.

 *

 * - Manish Lachwani (12/09/2003)

 */

#include "i2c-yosemite.h"

/*

 * Poll the I2C interface for the BUSY bit.

 */

static int titan_i2c_poll(void)

{

	int i = 0;

	unsigned long val = 0;

	for (i = 0; i < TITAN_I2C_MAX_POLL; i++) {

		val = TITAN_I2C_READ(TITAN_I2C_COMMAND);

		if (!(val & 0x8000))

			return 0;

	}

	return TITAN_I2C_ERR_TIMEOUT;

}

/*

 * Execute the I2C command

 */

int titan_i2c_xfer(unsigned int slave_addr, titan_i2c_command * cmd,

		   int size, unsigned int *addr)

{

	int loop, bytes = 0, i;

	unsigned int *write_data, data, *read_data;

	unsigned long reg_val, val;

	write_data = cmd->data;

	read_data = addr;

	TITAN_I2C_WRITE(TITAN_I2C_SLAVE_ADDRESS, slave_addr);

	if (cmd->type == TITAN_I2C_CMD_WRITE)

		loop = cmd->write_size;

	else

		loop = size;

	while (loop > 0) {

		if ((cmd->type == TITAN_I2C_CMD_WRITE) ||

		    (cmd->type == TITAN_I2C_CMD_READ_WRITE)) {

			reg_val = TITAN_I2C_DATA;

			for (i = 0; i < TITAN_I2C_MAX_WORDS_PER_RW;

			     ++i, write_data += 2, reg_val += 4) {

				if (bytes < cmd->write_size) {

					data = write_data[0];

					++data;

				}

				if (bytes < cmd->write_size) {

					data = write_data[1];

					++data;

				}

				TITAN_I2C_WRITE(reg_val, data);

			}

		}

		TITAN_I2C_WRITE(TITAN_I2C_COMMAND,

				(unsigned int) (cmd->type << 13));

		if (titan_i2c_poll() != TITAN_I2C_ERR_OK)

			return TITAN_I2C_ERR_TIMEOUT;

		if ((cmd->type == TITAN_I2C_CMD_READ) ||

		    (cmd->type == TITAN_I2C_CMD_READ_WRITE)) {

			reg_val = TITAN_I2C_DATA;

			for (i = 0; i < TITAN_I2C_MAX_WORDS_PER_RW;

			     ++i, read_data += 2, reg_val += 4) {

				data = TITAN_I2C_READ(reg_val);

				if (bytes < size) {

					read_data[0] = data & 0xff;

					++bytes;

				}

				if (bytes < size) {

					read_data[1] =

					    ((data >> 8) & 0xff);

					++bytes;

				}

			}

		}

		loop -= (TITAN_I2C_MAX_WORDS_PER_RW * 2);

	}

	/*

	 * Read the Interrupt status and then return the appropriate error code

	 */

	val = TITAN_I2C_READ(TITAN_I2C_INTERRUPTS);

	if (val & 0x0020)

		return TITAN_I2C_ERR_ARB_LOST;

	if (val & 0x0040)

		return TITAN_I2C_ERR_NO_RESP;

	if (val & 0x0080)

		return TITAN_I2C_ERR_DATA_COLLISION;

	return TITAN_I2C_ERR_OK;

}

/*

 * Init the I2C subsystem of the PMC-Sierra Yosemite board

 */

int titan_i2c_init(titan_i2c_config * config)

{

	unsigned int val;

	/*

	 * Reset the SCMB and program into the I2C mode

	 */

	TITAN_I2C_WRITE(TITAN_I2C_SCMB_CONTROL, 0xA000);

	TITAN_I2C_WRITE(TITAN_I2C_SCMB_CONTROL, 0x2000);

	/*

	 * Configure the filtera and clka values

	 */

	val = TITAN_I2C_READ(TITAN_I2C_SCMB_CLOCK_A);

	val |= ((val & ~(0xF000)) | ((config->filtera << 12) & 0xF000));

	val |= ((val & ~(0x03FF)) | (config->clka & 0x03FF));

	TITAN_I2C_WRITE(TITAN_I2C_SCMB_CLOCK_A, val);

	/*

	 * Configure the filterb and clkb values

	 */

	val = TITAN_I2C_READ(TITAN_I2C_SCMB_CLOCK_B);

	val |= ((val & ~(0xF000)) | ((config->filterb << 12) & 0xF000));

	val |= ((val & ~(0x03FF)) | (config->clkb & 0x03FF));

	TITAN_I2C_WRITE(TITAN_I2C_SCMB_CLOCK_B, val);

	return TITAN_I2C_ERR_OK;

}