Loading drivers/net/Makefile +1 −1 Original line number Original line Diff line number Diff line Loading @@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ obj-$(CONFIG_NET_WIRELESS) += wireless/ obj-$(CONFIG_NET_RADIO) += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_IRDA) += irda/ Loading drivers/net/ibm_emac/ibm_emac_core.c +1 −1 Original line number Original line Diff line number Diff line Loading @@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = { static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { { struct ocp_enet_private *fep = dev->priv; struct ocp_enet_private *fep = dev->priv; uint *data = (uint *) & rq->ifr_ifru; uint16_t *data = (uint16_t *) & rq->ifr_ifru; switch (cmd) { switch (cmd) { case SIOCGMIIPHY: case SIOCGMIIPHY: Loading drivers/net/tulip/tulip_core.c +1 −1 Original line number Original line Diff line number Diff line Loading @@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev) if (entry != 0) { if (entry != 0) { /* Avoid a chip errata by prefixing a dummy entry. Don't do /* Avoid a chip errata by prefixing a dummy entry. Don't do this on the ULI526X as it triggers a different problem */ this on the ULI526X as it triggers a different problem */ if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].mapping = 0; tp->tx_buffers[entry].mapping = 0; tp->tx_ring[entry].length = tp->tx_ring[entry].length = Loading drivers/net/wireless/Kconfig +1 −1 Original line number Original line Diff line number Diff line Loading @@ -323,7 +323,7 @@ config PRISM54 For a complete list of supported cards visit <http://prism54.org>. For a complete list of supported cards visit <http://prism54.org>. Here is the latest confirmed list of supported cards: Here is the latest confirmed list of supported cards: 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) Allnet ALL0271 PCI Card Allnet ALL0271 PCI Card Compex WL54G Cardbus Card Compex WL54G Cardbus Card Corega CG-WLCB54GT Cardbus Card Corega CG-WLCB54GT Cardbus Card Loading Loading
drivers/net/Makefile +1 −1 Original line number Original line Diff line number Diff line Loading @@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ obj-$(CONFIG_NET_WIRELESS) += wireless/ obj-$(CONFIG_NET_RADIO) += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_IRDA) += irda/ Loading
drivers/net/ibm_emac/ibm_emac_core.c +1 −1 Original line number Original line Diff line number Diff line Loading @@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = { static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { { struct ocp_enet_private *fep = dev->priv; struct ocp_enet_private *fep = dev->priv; uint *data = (uint *) & rq->ifr_ifru; uint16_t *data = (uint16_t *) & rq->ifr_ifru; switch (cmd) { switch (cmd) { case SIOCGMIIPHY: case SIOCGMIIPHY: Loading
drivers/net/tulip/tulip_core.c +1 −1 Original line number Original line Diff line number Diff line Loading @@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev) if (entry != 0) { if (entry != 0) { /* Avoid a chip errata by prefixing a dummy entry. Don't do /* Avoid a chip errata by prefixing a dummy entry. Don't do this on the ULI526X as it triggers a different problem */ this on the ULI526X as it triggers a different problem */ if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].mapping = 0; tp->tx_buffers[entry].mapping = 0; tp->tx_ring[entry].length = tp->tx_ring[entry].length = Loading
drivers/net/wireless/Kconfig +1 −1 Original line number Original line Diff line number Diff line Loading @@ -323,7 +323,7 @@ config PRISM54 For a complete list of supported cards visit <http://prism54.org>. For a complete list of supported cards visit <http://prism54.org>. Here is the latest confirmed list of supported cards: Here is the latest confirmed list of supported cards: 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) Allnet ALL0271 PCI Card Allnet ALL0271 PCI Card Compex WL54G Cardbus Card Compex WL54G Cardbus Card Corega CG-WLCB54GT Cardbus Card Corega CG-WLCB54GT Cardbus Card Loading