Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d3c57a4b authored by Jishnu Prakash's avatar Jishnu Prakash Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add support for yupik IDP with PM7250B 

Add device tree support for yupik IDP variant with PM7250B
replacing PM7325B.

Change-Id: I5445934bd05b8ef14a99c84b1d56ffafa848ef29
parent 051d1735

qcom/pm7250b.dtsi

+2 −2
Original line number Diff line number Diff line
@@ -9,7 +9,7 @@ 
	interrupt-controller;

	#interrupt-cells = <4>;



	qcom,pm7250b@2 {

	pm7250b_2: qcom,pm7250b@2 {

		compatible = "qcom,spmi-pmic";

		reg = <2 SPMI_USID>;

		#address-cells = <1>;
@@ -408,7 +408,7 @@ 
		};

	};



	qcom,pm7250b@3 {

	pm7250b_3: qcom,pm7250b@3 {

		compatible = "qcom,spmi-pmic";

		reg = <3 SPMI_USID>;

		#address-cells = <1>;

qcom/yupik-idp-pm7250b.dtsi

+309 −1
Original line number Diff line number Diff line 
#include "yupik-idp.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/clock/qcom,rpmh.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>

#include "yupik-pmic-overlay.dtsi"

#include "pm7250b.dtsi"

#include "yupik-audio-overlay.dtsi"

#include "yupik-pm7250b-thermal-overlay.dtsi"



/ {

	qcom,pmic-id = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x2e>;

	qcom,pmic-id-size = <9>;

};



&soc {

	gpio_keys {

		compatible = "gpio-keys";

		label = "gpio-keys";



		pinctrl-names = "default";

		pinctrl-0 = <&key_vol_up_default>;



		vol_up {

			label = "volume_up";

			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

			gpio-key,wakeup;

			debounce-interval = <15>;

			linux,can-disable;

		};

	};

};



&qupv3_se9_i2c {

	status = "ok";

	qcom,clk-freq-out = <1000000>;

	#address-cells = <1>;

	#size-cells = <0>;

	nq@28 {

		compatible = "qcom,sn-nci";

		reg = <0x28>;

		qcom,sn-irq = <&tlmm 41 0x00>;

		qcom,sn-ven = <&tlmm 38 0x00>;

		qcom,sn-firm = <&tlmm 40 0x00>;

		qcom,sn-clkreq = <&tlmm 39 0x00>;

		qcom,sn-vdd-1p8-supply = <&L18B>;

		qcom,sn-vdd-1p8-voltage = <1800000 1800000>;

		qcom,sn-vdd-1p8-current = <157000>;

		interrupt-parent = <&tlmm>;

		interrupts = <41 0>;

		interrupt-names = "nfc_irq";

		pinctrl-names = "nfc_active", "nfc_suspend";

		pinctrl-0 = <&nfc_int_active &nfc_enable_active>;

		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;

	};

};



&ufsphy_mem {

	compatible = "qcom,ufs-phy-qmp-v4-yupik";



	vdda-phy-supply = <&L10C>;

	vdda-pll-supply = <&L6B>;

	vdda-phy-max-microamp = <97500>;

	vdda-pll-max-microamp = <18400>;



	status = "ok";

};



&ufshc_mem {

	vdd-hba-supply = <&gcc_ufs_phy_gdsc>;

	vdd-hba-fixed-regulator;



	vcc-supply = <&L7B>;

	vcc-voltage-level = <2504000 2952000>;

	vcc-low-voltage-sup;

	vcc-max-microamp = <800000>;



	/*

	 * Yupik target supports both UFS2.2 & UFS3.1, here

	 * vccq2 is supplied via eLDO, and that is controlled via

	 * L9B which supports a max voltage of 1.2V, but eLDO would

	 * supply 1.8V. and same L9B acts as vccq voltage for UFS3.1

	 * devices.

	 * Here L9B can max support for 1.2V but UFS GKI driver code

	 * votes for 1.8V, which is leading to failure from pmic

	 * regulator.

	 *

	 * Now since vccq and control of eLDO are common that is L9B

	 * we can use vccq vote as control of eLDO for vccq2.

	 * Hence vccq entries shall be used for both type of UFS

	 * devices only. And vccq entries should not be changed/removed

	 * for any design alteration.

	 */

	vccq-supply = <&L9B>;

	vccq-max-microamp = <900000>;

	vccq-min-microamp = <10000>;



	qcom,vddp-ref-clk-supply = <&L9B>;

	qcom,vddp-ref-clk-max-microamp = <100>;



	status = "ok";

};



&pm7250b_2 {

	/* Slave ID - 8 */

	reg = <8 SPMI_USID>;

};



&pm7250b_3 {

	/* Slave ID - 9 */

	reg = <9 SPMI_USID>;

};



&pm7250b_vadc {

	interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;



	smb1390_therm@e {

		qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_SMB1398_TEMP>;

	};



	charger_skin_therm {

		reg = <ADC5_AMUX_THM1_100K_PU>;

		label = "charger_skin_therm";

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};



	conn_therm {

		reg = <ADC5_AMUX_THM3_100K_PU>;

		label = "conn_therm";

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};

};



&pm7250b_adc_tm {

	interrupts = <0x8 0x35 0x0 IRQ_TYPE_EDGE_RISING>;

	io-channels = <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,

			<&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>;



	/* Channel nodes */

	charger_skin_therm {

		reg = <ADC5_AMUX_THM1_100K_PU>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

	};



	conn_therm {

		reg = <ADC5_AMUX_THM3_100K_PU>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

	};

};



&thermal_zones {

	chg-skin-therm-usr {

		polling-delay-passive = <0>;

		polling-delay = <0>;

		thermal-governor = "user_space";

		thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>;

		wake-capable-sensor;

		trips {

			active-config0 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

		};

	};



	conn-therm-usr {

		polling-delay-passive = <0>;

		polling-delay = <0>;

		thermal-governor = "user_space";

		thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM3_100K_PU>;

		wake-capable-sensor;

		trips {

			active-config0 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

		};

	};

};



&pm7250b_tz {

	interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;

};



&pm7250b_bcl {

	interrupts = <0x8 0x1d 0x0 IRQ_TYPE_NONE>,

			<0x8 0x1d 0x1 IRQ_TYPE_NONE>,

			<0x8 0x1d 0x2 IRQ_TYPE_NONE>;

};



&pm7250b_clkdiv {

	clocks = <&rpmhcc RPMH_CXO_CLK>;

};



&pm7250b_charger {

	status = "disabled";

};



&pm7250b_qg {

	status = "disabled";

};



&pm7250b_pdphy {

	status = "disabled";

};



&spmi_debug_bus {

	status = "ok";

};



&spmi_glink_debug {

	status = "ok";

};



&pm8350c_switch0 {

	qcom,led-mask = <9>; /* Channels 1 & 4 */

	qcom,symmetry-en;

};



&pm8350c_switch1 {

	qcom,led-mask = <6>; /* Channels 2 & 3 */

	qcom,symmetry-en;

};



&pm8350c_switch2 {

	qcom,led-mask = <15>; /* All Channels */

	qcom,symmetry-en;

};



&pm8350c_flash {

	status = "ok";

};



&battery_charger {

	qcom,thermal-mitigation = <3000000 1500000 1000000 500000>;

};



&sdhc_1 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sdc1_on>;

	pinctrl-1 = <&sdc1_off>;



	vdd-supply = <&L7B>;

	qcom,vdd-voltage-level = <2952000 2952000>;

	qcom,vdd-current-level = <0 570000>;



	vdd-io-supply = <&L19B>;

	qcom,vdd-io-always-on;

	qcom,vdd-io-lpm-sup;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <0 325000>;



	status = "ok";

};



&sdhc_2 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sdc2_on>;

	pinctrl-1 = <&sdc2_off>;



	vdd-supply = <&L9C>;

	qcom,vdd-voltage-level = <2960000 2960000>;

	qcom,vdd-current-level = <0 800000>;



	vdd-io-supply = <&L6C>;

	qcom,vdd-io-voltage-level = <1800000 2960000>;

	qcom,vdd-io-current-level = <0 22000>;



	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;



	status = "ok";

};



&qupv3_se13_i2c {

	#address-cells = <1>;

	#size-cells = <0>;



	status = "ok";

	qcom,i2c-touch-active="novatek,NVT-ts";



	novatek@62 {

		compatible = "novatek,NVT-ts";

		reg = <0x62>;



		interrupt-parent = <&tlmm>;

		interrupts = <81 0x2008>;



		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",

					"pmx_ts_release";



		pinctrl-0 = <&ts_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		pinctrl-2 = <&ts_release>;



		novatek,reset-gpio = <&tlmm 105 0x00>;

		novatek,irq-gpio = <&tlmm 81 0x2008>;



		novatek,trusted-touch-mode = "vm_mode";

		novatek,touch-environment = "pvm";

		novatek,trusted-touch-spi-irq = <601>;

		novatek,trusted-touch-io-bases = <0xf134000 0xf135000 0xf169000 0xf151000 0xa94000 0x00a10000>;

		novatek,trusted-touch-io-sizes = <0x1000 0x1000 0x1000 0x1000 0x1000 0x4000>;

	};

};



#include "camera/yupik-camera-sensor-idp.dtsi"

qcom/yupik-pm7250b-thermal-overlay.dtsi

0 → 100644
+226 −0
Original line number Diff line number Diff line 
#include <dt-bindings/thermal/thermal_qti.h>



&mdss_mdp {

	#cooling-cells = <2>;

};



&battery_charger {

	#cooling-cells = <2>;

};



&thermal_zones {

	socd {

		cooling-maps {

			socd_cpu4 {

				trip = <&socd_trip>;

				cooling-device = <&cpu4_isolate 1 1>;

			};



			socd_cpu5 {

				trip = <&socd_trip>;

				cooling-device = <&cpu5_isolate 1 1>;

			};



			socd_cpu6 {

				trip = <&socd_trip>;

				cooling-device = <&cpu6_isolate 1 1>;

			};



			socd_cpu7 {

				trip = <&socd_trip>;

				cooling-device = <&cpu7_isolate 1 1>;

			};

		};

	};



	pm8350c-bcl-lvl0 {

		disable-thermal-zone;

		cooling-maps {

			vph_cpu4 {

				trip = <&c_bcl_lvl0>;

				cooling-device = <&cpu4_isolate 1 1>;

			};



			vph_cpu5 {

				trip = <&c_bcl_lvl0>;

				cooling-device = <&cpu5_isolate 1 1>;

			};



			vph_gpu0 {

				trip = <&c_bcl_lvl0>;

				cooling-device = <&msm_gpu 2 2>;

			};



			vph_cdsp0 {

				trip = <&c_bcl_lvl0>;

				cooling-device = <&cdsp_sw 2 2>;

			};



			vbat_modem0 {

				trip = <&c_bcl_lvl0>;

				cooling-device = <&modem_pa 2 2>;

			};



			vbat_modem1 {

				trip = <&c_bcl_lvl0>;

				cooling-device = <&modem_tj 1 1>;

			};

		};

	};



	pm8350c-bcl-lvl1 {

		disable-thermal-zone;

		cooling-maps {

			vph_cpu6 {

				trip = <&c_bcl_lvl1>;

				cooling-device = <&cpu6_isolate 1 1>;

			};



			vph_cpu7 {

				trip = <&c_bcl_lvl1>;

				cooling-device = <&cpu7_isolate 1 1>;

			};



			vph_gpu1 {

				trip = <&c_bcl_lvl1>;

				cooling-device = <&msm_gpu 4 4>;

			};



			vph_cdsp1 {

				trip = <&c_bcl_lvl1>;

				cooling-device = <&cdsp_sw 4 4>;

			};



			vbat_modem0 {

				trip = <&c_bcl_lvl1>;

				cooling-device = <&modem_tj 3 3>;

			};

		};

	};



	pm8350c-bcl-lvl2 {

		disable-thermal-zone;

		cooling-maps {

			vph_gpu2 {

				trip = <&c_bcl_lvl2>;

				cooling-device = <&msm_gpu THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			vph_cdsp2 {

				trip = <&c_bcl_lvl2>;

				cooling-device = <&cdsp_sw THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};

		};

	};



	pm7325_tz {

		cooling-maps {

			pm7325_gpu {

				trip = <&pm7325_trip0>;

				cooling-device = <&msm_gpu THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pm7325_cpu1 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu1_isolate 1 1>;

			};



			pm7325_cpu2 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu2_isolate 1 1>;

			};



			pm7325_cpu3 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu3_isolate 1 1>;

			};



			pm7325_cpu4 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu4_isolate 1 1>;

			};



			pm7325_cpu5 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu5_isolate 1 1>;

			};



			pm7325_cpu6 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu6_isolate 1 1>;

			};



			pm7325_cpu7 {

				trip = <&pm7325_trip0>;

				cooling-device = <&cpu7_isolate 1 1>;

			};

		};

	};



	pm8350c_tz {

		cooling-maps {

			pm8350c_gpu {

				trip = <&pm8350c_trip0>;

				cooling-device = <&msm_gpu THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pm8350c_mdm {

				trip = <&pm8350c_trip0>;

				cooling-device = <&modem_tj THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pm8350c_nsp {

				trip = <&pm8350c_trip0>;

				cooling-device = <&cdsp_sw THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};

		};

	};



	pmr735a_tz {

		cooling-maps {

			pmr735a_pa {

				trip = <&pmr735a_trip0>;

				cooling-device = <&modem_pa_dsc

							THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pmr735a_pa_fr1 {

				trip = <&pmr735a_trip0>;

				cooling-device = <&modem_pa_fr1_dsc

							THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pmr735a_mmw0 {

				trip = <&pmr735a_trip0>;

				cooling-device = <&modem_mmw0 THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pmr735a_mmw1 {

				trip = <&pmr735a_trip0>;

				cooling-device = <&modem_mmw1 THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pmr735a_mmw2 {

				trip = <&pmr735a_trip0>;

				cooling-device = <&modem_mmw2 THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};



			pmr735a_mmw3 {

				trip = <&pmr735a_trip0>;

				cooling-device = <&modem_mmw3 THERMAL_MAX_LIMIT

							THERMAL_MAX_LIMIT>;

			};

		};

	};

};