Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d2762090 authored by Ulf Hansson's avatar Ulf Hansson
Browse files

mmc: mmci: Convert to the mmc gpio API 



To avoid duplication of code while handling card detect and write
protect GPIO pins/irqs, let's convert to use the mmc gpio API.

Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent f3737fa3

drivers/mmc/host/mmci.c

+15 −82
Original line number Diff line number Diff line
@@ -23,6 +23,7 @@ 
#include <linux/mmc/pm.h>

#include <linux/mmc/host.h>

#include <linux/mmc/card.h>

#include <linux/mmc/slot-gpio.h>

#include <linux/amba/bus.h>

#include <linux/clk.h>

#include <linux/scatterlist.h>
@@ -1326,35 +1327,18 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 
	pm_runtime_put_autosuspend(mmc_dev(mmc));

}



static int mmci_get_ro(struct mmc_host *mmc)

{

	struct mmci_host *host = mmc_priv(mmc);



	if (host->gpio_wp == -ENOSYS)

		return -ENOSYS;



	return gpio_get_value_cansleep(host->gpio_wp);

}



static int mmci_get_cd(struct mmc_host *mmc)

{

	struct mmci_host *host = mmc_priv(mmc);

	struct mmci_platform_data *plat = host->plat;

	unsigned int status;

	unsigned int status = mmc_gpio_get_cd(mmc);



	if (host->gpio_cd == -ENOSYS) {

	if (status == -ENOSYS) {

		if (!plat->status)

			return 1; /* Assume always present */



		status = plat->status(mmc_dev(host->mmc));

	} else

		status = !!gpio_get_value_cansleep(host->gpio_cd)

			^ plat->cd_invert;



	/*

	 * Use positive logic throughout - status is zero for no card,

	 * non-zero for card inserted.

	 */

	}

	return status;

}
@@ -1391,21 +1375,12 @@ static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) 
	return ret;

}



static irqreturn_t mmci_cd_irq(int irq, void *dev_id)

{

	struct mmci_host *host = dev_id;



	mmc_detect_change(host->mmc, msecs_to_jiffies(500));



	return IRQ_HANDLED;

}



static struct mmc_host_ops mmci_ops = {

	.request	= mmci_request,

	.pre_req	= mmci_pre_request,

	.post_req	= mmci_post_request,

	.set_ios	= mmci_set_ios,

	.get_ro		= mmci_get_ro,

	.get_ro		= mmc_gpio_get_ro,

	.get_cd		= mmci_get_cd,

	.start_signal_voltage_switch = mmci_sig_volt_switch,

};
@@ -1494,10 +1469,6 @@ static int mmci_probe(struct amba_device *dev, 
	host = mmc_priv(mmc);

	host->mmc = mmc;



	host->gpio_wp = -ENOSYS;

	host->gpio_cd = -ENOSYS;

	host->gpio_cd_irq = -1;



	host->hw_designer = amba_manf(dev);

	host->hw_revision = amba_rev(dev);

	dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
@@ -1568,6 +1539,9 @@ static int mmci_probe(struct amba_device *dev, 


	mmc->caps = plat->capabilities;

	mmc->caps2 = plat->capabilities2;

	if (!plat->cd_invert)

		mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;

	mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;



	if (variant->busy_detect) {

		mmci_ops.card_busy = mmci_card_busy;
@@ -1621,49 +1595,23 @@ static int mmci_probe(struct amba_device *dev, 
		goto err_gpio_cd;

	}

	if (gpio_is_valid(plat->gpio_cd)) {

		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");

		if (ret == 0)

			ret = gpio_direction_input(plat->gpio_cd);

		if (ret == 0)

			host->gpio_cd = plat->gpio_cd;

		else if (ret != -ENOSYS)

		ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0);

		if (ret)

			goto err_gpio_cd;



		/*

		 * A gpio pin that will detect cards when inserted and removed

		 * will most likely want to trigger on the edges if it is

		 * 0 when ejected and 1 when inserted (or mutatis mutandis

		 * for the inverted case) so we request triggers on both

		 * edges.

		 */

		ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),

				mmci_cd_irq,

				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,

				DRIVER_NAME " (cd)", host);

		if (ret >= 0)

			host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);

	}

	if (plat->gpio_wp == -EPROBE_DEFER) {

		ret = -EPROBE_DEFER;

		goto err_gpio_wp;

		goto err_gpio_cd;

	}

	if (gpio_is_valid(plat->gpio_wp)) {

		ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");

		if (ret == 0)

			ret = gpio_direction_input(plat->gpio_wp);

		if (ret == 0)

			host->gpio_wp = plat->gpio_wp;

		else if (ret != -ENOSYS)

			goto err_gpio_wp;

		ret = mmc_gpio_request_ro(mmc, plat->gpio_wp);

		if (ret)

			goto err_gpio_cd;

	}



	if ((host->plat->status || host->gpio_cd != -ENOSYS)

	    && host->gpio_cd_irq < 0)

		mmc->caps |= MMC_CAP_NEEDS_POLL;



	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);

	if (ret)

		goto unmap;

		goto err_gpio_cd;



	if (!dev->irq[1])

		host->singleirq = true;
@@ -1695,14 +1643,6 @@ static int mmci_probe(struct amba_device *dev, 


 irq0_free:

	free_irq(dev->irq[0], host);

 unmap:

	if (host->gpio_wp != -ENOSYS)

		gpio_free(host->gpio_wp);

 err_gpio_wp:

	if (host->gpio_cd_irq >= 0)

		free_irq(host->gpio_cd_irq, host);

	if (host->gpio_cd != -ENOSYS)

		gpio_free(host->gpio_cd);

 err_gpio_cd:

	iounmap(host->base);

 clk_disable:
@@ -1741,13 +1681,6 @@ static int mmci_remove(struct amba_device *dev) 
		if (!host->singleirq)

			free_irq(dev->irq[1], host);



		if (host->gpio_wp != -ENOSYS)

			gpio_free(host->gpio_wp);

		if (host->gpio_cd_irq >= 0)

			free_irq(host->gpio_cd_irq, host);

		if (host->gpio_cd != -ENOSYS)

			gpio_free(host->gpio_cd);



		iounmap(host->base);

		clk_disable_unprepare(host->clk);

drivers/mmc/host/mmci.h

+0 −3
Original line number Diff line number Diff line
@@ -176,9 +176,6 @@ struct mmci_host { 
	struct mmc_data		*data;

	struct mmc_host		*mmc;

	struct clk		*clk;

	int			gpio_cd;

	int			gpio_wp;

	int			gpio_cd_irq;

	bool			singleirq;



	spinlock_t		lock;