Merge "ARM: dts: msm: add bt power node for sa6155"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/clock/qcom,gcc-sm6150.h>

#include "sa6155-cnss.dtsi"

&qupv3_se0_2uart {

	status = "ok";

&soc {

	/* PWR_CTR2_VDD_1P8 supply */

	vreg_conn_1p8: vreg_conn_1p8 {

		compatible = "regulator-fixed";

		regulator-name = "vreg_conn_1p8";

		startup-delay-us = <4000>;

		enable-active-high;

		gpio = <&pm6155_1_gpios 1 0>;

	};

	/* PWR_CTR1_VDD_PA supply */

	vreg_conn_pa: vreg_conn_pa {

		compatible = "regulator-fixed";

		regulator-name = "vreg_conn_pa";

		startup-delay-us = <4000>;

		enable-active-high;

		gpio = <&pm6155_1_gpios 6 0>;

	};

	bluetooth_ext: bt-qca-auto-converged {

		compatible = "qcom,qca-auto-converged";

		pinctrl-names = "default";

		pinctrl-0 = <&bt_en_active>;

		/* BT_EN */

		qcom,bt-reset-gpio = <&tlmm 85 0>;

		/* PWR_CTR1_VDD_PA */

		qcom,bt-vdd-ctrl1-supply = <&vreg_conn_pa>;

		/* PWR_CTR2_VDD_1P8 */

		qcom,bt-vdd-ctrl2-supply = <&vreg_conn_1p8>;

		qcom,bt-vdd-rfa1-supply = <&pm6155_1_s6>;

		qcom,bt-vdd-rfa2-supply = <&pm6155_1_s5>;

		qcom,bt-vdd-rfa3-supply = <&pm6155_1_l15>;

		/* <vol_min, vol_max, load_curr, is_retention_supp> */

		qcom,bt-vdd-rfa1-config = <1350000 1350000 0 0>;

		qcom,bt-vdd-rfa2-config = <2040000 2040000 0 0>;

		qcom,bt-vdd-rfa3-config = <1904000 1904000 450000 0>;

	};

};

&qupv3_se7_4uart {

	status = "ok";

};

		sdhc0 = &sdhc_1;

		sdhc1 = &sdhc_2;

		spi10 = &qupv3_se10_spi;

		hsuart0 = &qupv3_se7_4uart;

	};

	cpus {