Commit ce5de62e authored Mar 05, 2020 by Greg Kroah-Hartman

Merge 5.4.24 into android-5.4



Changes in 5.4.24
	io_uring: grab ->fs as part of async offload
	EDAC: skx_common: downgrade message importance on missing PCI device
	net: dsa: b53: Ensure the default VID is untagged
	net: fib_rules: Correctly set table field when table number exceeds 8 bits
	net: macb: ensure interface is not suspended on at91rm9200
	net: mscc: fix in frame extraction
	net: phy: restore mdio regs in the iproc mdio driver
	net: sched: correct flower port blocking
	net/tls: Fix to avoid gettig invalid tls record
	nfc: pn544: Fix occasional HW initialization failure
	qede: Fix race between rdma destroy workqueue and link change event
	Revert "net: dev: introduce support for sch BYPASS for lockless qdisc"
	udp: rehash on disconnect
	sctp: move the format error check out of __sctp_sf_do_9_1_abort
	bnxt_en: Improve device shutdown method.
	bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
	bonding: add missing netdev_update_lockdep_key()
	net: export netdev_next_lower_dev_rcu()
	bonding: fix lockdep warning in bond_get_stats()
	ipv6: Fix route replacement with dev-only route
	ipv6: Fix nlmsg_flags when splitting a multipath route
	ipmi:ssif: Handle a possible NULL pointer reference
	drm/msm: Set dma maximum segment size for mdss
	sched/core: Don't skip remote tick for idle CPUs
	timers/nohz: Update NOHZ load in remote tick
	sched/fair: Prevent unlimited runtime on throttled group
	dax: pass NOWAIT flag to iomap_apply
	mac80211: consider more elements in parsing CRC
	cfg80211: check wiphy driver existence for drvinfo report
	s390/zcrypt: fix card and queue total counter wrap
	qmi_wwan: re-add DW5821e pre-production variant
	qmi_wwan: unconditionally reject 2 ep interfaces
	NFSv4: Fix races between open and dentry revalidation
	perf/smmuv3: Use platform_get_irq_optional() for wired interrupt
	perf/x86/intel: Add Elkhart Lake support
	perf/x86/cstate: Add Tremont support
	perf/x86/msr: Add Tremont support
	ceph: do not execute direct write in parallel if O_APPEND is specified
	ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi
	drm/amd/display: Do not set optimized_require to false after plane disable
	RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()
	drm/amd/display: Check engine is not NULL before acquiring
	drm/amd/display: Limit minimum DPPCLK to 100MHz.
	drm/amd/display: Add initialitions for PLL2 clock source
	amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags
	soc/tegra: fuse: Fix build with Tegra194 configuration
	i40e: Fix the conditional for i40e_vc_validate_vqs_bitmaps
	net: ena: fix potential crash when rxfh key is NULL
	net: ena: fix uses of round_jiffies()
	net: ena: add missing ethtool TX timestamping indication
	net: ena: fix incorrect default RSS key
	net: ena: rss: do not allocate key when not supported
	net: ena: rss: fix failure to get indirection table
	net: ena: rss: store hash function as values and not bits
	net: ena: fix incorrectly saving queue numbers when setting RSS indirection table
	net: ena: fix corruption of dev_idx_to_host_tbl
	net: ena: ethtool: use correct value for crc32 hash
	net: ena: ena-com.c: prevent NULL pointer dereference
	ice: update Unit Load Status bitmask to check after reset
	cifs: Fix mode output in debugging statements
	cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
	mac80211: fix wrong 160/80+80 MHz setting
	net: hns3: add management table after IMP reset
	net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
	nvme/tcp: fix bug on double requeue when send fails
	nvme: prevent warning triggered by nvme_stop_keep_alive
	nvme/pci: move cqe check after device shutdown
	ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
	audit: fix error handling in audit_data_to_entry()
	audit: always check the netlink payload length in audit_receive_msg()
	ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
	ACPI: watchdog: Fix gas->access_width usage
	KVM: VMX: check descriptor table exits on instruction emulation
	HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
	HID: core: fix off-by-one memset in hid_report_raw_event()
	HID: core: increase HID report buffer size to 8KiB
	drm/amdgpu: Drop DRIVER_USE_AGP
	drm/radeon: Inline drm_get_pci_dev
	macintosh: therm_windtunnel: fix regression when instantiating devices
	tracing: Disable trace_printk() on post poned tests
	Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
	amdgpu/gmc_v9: save/restore sdpif regs during S3
	cpufreq: Fix policy initialization for internal governor drivers
	io_uring: fix 32-bit compatability with sendmsg/recvmsg
	netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports
	net/smc: transfer fasync_list in case of fallback
	vhost: Check docket sk_family instead of call getname
	netfilter: ipset: Fix forceadd evaluation path
	netfilter: xt_hashlimit: reduce hashlimit_mutex scope for htable_put()
	HID: alps: Fix an error handling path in 'alps_input_configured()'
	HID: hiddev: Fix race in in hiddev_disconnect()
	MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
	i2c: altera: Fix potential integer overflow
	i2c: jz4780: silence log flood on txabrt
	drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetime
	drm/i915/gvt: Separate display reset from ALL_ENGINES reset
	nl80211: fix potential leak in AP start
	mac80211: Remove a redundant mutex unlock
	kbuild: fix DT binding schema rule to detect command line changes
	hv_netvsc: Fix unwanted wakeup in netvsc_attach()
	usb: charger: assign specific number for enum value
	nvme-pci: Hold cq_poll_lock while completing CQEs
	s390/qeth: vnicc Fix EOPNOTSUPP precedence
	net: netlink: cap max groups which will be considered in netlink_bind()
	net: atlantic: fix use after free kasan warn
	net: atlantic: fix potential error handling
	net: atlantic: fix out of range usage of active_vlans array
	net/smc: no peer ID in CLC decline for SMCD
	net: ena: make ena rxfh support ETH_RSS_HASH_NO_CHANGE
	selftests: Install settings files to fix TIMEOUT failures
	kbuild: remove header compile test
	kbuild: move headers_check rule to usr/include/Makefile
	kbuild: remove unneeded variable, single-all
	kbuild: make single target builds even faster
	namei: only return -ECHILD from follow_dotdot_rcu()
	mwifiex: drop most magic numbers from mwifiex_process_tdls_action_frame()
	mwifiex: delete unused mwifiex_get_intf_num()
	KVM: SVM: Override default MMIO mask if memory encryption is enabled
	KVM: Check for a bad hva before dropping into the ghc slow path
	sched/fair: Optimize select_idle_cpu
	f2fs: fix to add swap extent correctly
	RDMA/hns: Simplify the calculation and usage of wqe idx for post verbs
	RDMA/hns: Bugfix for posting a wqe with sge
	drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'
	ima: ima/lsm policy rule loading logic bug fixes
	kprobes: Set unoptimized flag after unoptimizing code
	lib/vdso: Make __arch_update_vdso_data() logic understandable
	lib/vdso: Update coarse timekeeper unconditionally
	pwm: omap-dmtimer: put_device() after of_find_device_by_node()
	perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etc
	perf ui gtk: Add missing zalloc object
	x86/resctrl: Check monitoring static key in the MBM overflow handler
	KVM: x86: Remove spurious kvm_mmu_unload() from vcpu destruction path
	KVM: x86: Remove spurious clearing of async #PF MSR
	rcu: Allow only one expedited GP to run concurrently with wakeups
	ubifs: Fix ino_t format warnings in orphan_delete()
	thermal: db8500: Depromote debug print
	thermal: brcmstb_thermal: Do not use DT coefficients
	netfilter: nft_tunnel: no need to call htons() when dumping ports
	netfilter: nf_flowtable: fix documentation
	bus: tegra-aconnect: Remove PM_CLK dependency
	xfs: clear kernel only flags in XFS_IOC_ATTRMULTI_BY_HANDLE
	locking/lockdep: Fix lockdep_stats indentation problem
	mm/debug.c: always print flags in dump_page()
	mm/gup: allow FOLL_FORCE for get_user_pages_fast()
	mm/huge_memory.c: use head to check huge zero page
	mm, thp: fix defrag setting if newline is not used
	kvm: nVMX: VMWRITE checks VMCS-link pointer before VMCS field
	kvm: nVMX: VMWRITE checks unsupported field before read-only field
	blktrace: Protect q->blk_trace with RCU
	Linux 5.4.24

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0b31557e16c72bd30d1e6938ed199918ff326d88

parents d0dbb0ad cff670b3

Documentation/kbuild/makefiles.rst

+0 −17

Original line number	Diff line number	Diff line
		@@ -1115,23 +1115,6 @@ When kbuild executes, the following steps are followed (roughly):
		In this example, extra-y is used to list object files that
		shall be built, but shall not be linked as part of built-in.a.

		header-test-y

		header-test-y specifies headers (`*.h`) in the current directory that
		should be compile tested to ensure they are self-contained,
		i.e. compilable as standalone units. If CONFIG_HEADER_TEST is enabled,
		this builds them as part of extra-y.

		header-test-pattern-y

		This works as a weaker version of header-test-y, and accepts wildcard
		patterns. The typical usage is::

		header-test-pattern-y += *.h

		This specifies all the files that matches to `*.h` in the current
		directory, but the files in 'header-test-' are excluded.

		6.7 Commands useful for building a boot image
		---------------------------------------------

Documentation/networking/nf_flowtable.txt

+1 −1

Original line number	Diff line number	Diff line
		@@ -76,7 +76,7 @@ flowtable and add one rule to your forward chain.

		table inet x {
		flowtable f {
		hook ingress priority 0 devices = { eth0, eth1 };
		hook ingress priority 0; devices = { eth0, eth1 };
		}
		chain y {
		type filter hook forward priority 0; policy accept;

Makefile

+51 −55

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: GPL-2.0
		VERSION = 5
		PATCHLEVEL = 4
		SUBLEVEL = 23
		SUBLEVEL = 24
		EXTRAVERSION =
		NAME = Kleptomaniac Octopus

		@@ -622,7 +622,6 @@ ifeq ($(KBUILD_EXTMOD),)
		init-y := init/
		drivers-y := drivers/ sound/
		drivers-$(CONFIG_SAMPLES) += samples/
		drivers-$(CONFIG_KERNEL_HEADER_TEST) += include/
		net-y := net/
		libs-y := lib/
		core-y := usr/
		@@ -1262,19 +1261,15 @@ headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
		$(Q)$(MAKE) $(hdr-inst)=include/uapi
		$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi

		# Deprecated. It is no-op now.
		PHONY += headers_check
		headers_check: headers
		$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
		$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi HDRCHECK=1
		headers_check:
		@:

		ifdef CONFIG_HEADERS_INSTALL
		prepare: headers
		endif

		ifdef CONFIG_HEADERS_CHECK
		all: headers_check
		endif

		PHONY += scripts_unifdef
		scripts_unifdef: scripts_basic
		$(Q)$(MAKE) $(build)=scripts scripts/unifdef
		@@ -1542,7 +1537,6 @@ help:
		@echo ' versioncheck - Sanity check on version.h usage'
		@echo ' includecheck - Check for duplicate included header files'
		@echo ' export_report - List the usages of all exported symbols'
		@echo ' headers_check - Sanity check on exported headers'
		@echo ' headerdep - Detect inclusion cycles in headers'
		@echo ' coccicheck - Check with Coccinelle'
		@echo ''
		@@ -1707,6 +1701,50 @@ help:
		PHONY += prepare
		endif # KBUILD_EXTMOD

		# Single targets
		# ---------------------------------------------------------------------------
		# To build individual files in subdirectories, you can do like this:
		#
		# make foo/bar/baz.s
		#
		# The supported suffixes for single-target are listed in 'single-targets'
		#
		# To build only under specific subdirectories, you can do like this:
		#
		# make foo/bar/baz/

		ifdef single-build

		# .ko is special because modpost is needed
		single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS)))
		single-no-ko := $(sort $(patsubst %.ko,%.mod, $(MAKECMDGOALS)))

		$(single-ko): single_modpost
		@:
		$(single-no-ko): descend
		@:

		ifeq ($(KBUILD_EXTMOD),)
		# For the single build of in-tree modules, use a temporary file to avoid
		# the situation of modules_install installing an invalid modules.order.
		MODORDER := .modules.tmp
		endif

		PHONY += single_modpost
		single_modpost: $(single-no-ko)
		$(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
		$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost

		KBUILD_MODULES := 1

		export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))

		# trim unrelated directories
		build-dirs := $(foreach d, $(build-dirs), \
		$(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))

		endif

		# Handle descending into subdirectories listed in $(build-dirs)
		# Preset locale variables to speed up the build process. Limit locale
		# tweaks to this spot to avoid wrong language settings when running
		@@ -1715,7 +1753,9 @@ endif # KBUILD_EXTMOD
		PHONY += descend $(build-dirs)
		descend: $(build-dirs)
		$(build-dirs): prepare
		$(Q)$(MAKE) $(build)=$@ single-build=$(single-build) need-builtin=1 need-modorder=1
		$(Q)$(MAKE) $(build)=$@ \
		single-build=$(if $(filter-out $@/, $(single-no-ko)),1) \
		need-builtin=1 need-modorder=1

		clean-dirs := $(addprefix _clean_, $(clean-dirs))
		PHONY += $(clean-dirs) clean
		@@ -1820,50 +1860,6 @@ tools/%: FORCE
		$(Q)mkdir -p $(objtree)/tools
		$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*

		# Single targets
		# ---------------------------------------------------------------------------
		# To build individual files in subdirectories, you can do like this:
		#
		# make foo/bar/baz.s
		#
		# The supported suffixes for single-target are listed in 'single-targets'
		#
		# To build only under specific subdirectories, you can do like this:
		#
		# make foo/bar/baz/

		ifdef single-build

		single-all := $(filter $(single-targets), $(MAKECMDGOALS))

		# .ko is special because modpost is needed
		single-ko := $(sort $(filter %.ko, $(single-all)))
		single-no-ko := $(sort $(patsubst %.ko,%.mod, $(single-all)))

		$(single-ko): single_modpost
		@:
		$(single-no-ko): descend
		@:

		ifeq ($(KBUILD_EXTMOD),)
		# For the single build of in-tree modules, use a temporary file to avoid
		# the situation of modules_install installing an invalid modules.order.
		MODORDER := .modules.tmp
		endif

		PHONY += single_modpost
		single_modpost: $(single-no-ko)
		$(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
		$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost

		KBUILD_MODULES := 1

		export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))

		single-build = $(if $(filter-out $@/, $(single-no-ko)),1)

		endif

		# FIXME Should go into a make.lib or something
		# ===========================================================================

arch/arm/boot/dts/stihxxx-b2120.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -46,7 +46,7 @@
		/* DAC */
		format = "i2s";
		mclk-fs = <256>;
		frame-inversion = <1>;
		frame-inversion;
		cpu {
		sound-dai = <&sti_uni_player2>;
		};

arch/mips/kernel/vpe.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -134,7 +134,7 @@ void release_vpe(struct vpe *v)
		{
		list_del(&v->list);
		if (v->load_addr)
		release_progmem(v);
		release_progmem(v->load_addr);
		kfree(v);
		}