Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cb72baf6 authored by Jing Li's avatar Jing Li
Browse files

ARM: dts: msm: Add new node for HHG camera device 

Override existing nodes for lahaina as MCLK and Voltage
changed for HHG platform.

Change-Id: I337e137a883b643d8501ef39cbb62e3d38a67c89
CRs-Fixed: 2853048
parent 7a1d7021

lahaina-camera-sensor-hhg.dtsi

0 → 100644
+78 −0
Original line number Diff line number Diff line 
&cam_cci1 {

/delete-node/ qcom,eeprom5;

/delete-node/ qcom,cam-sensor5;



	qcom,eeprom5 {

		cell-index = <5>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008j_l5>;

		cam_vdig-supply = <&pm8008j_l1>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1100000 0>;

		rgltr-max-voltage = <1800000 2800000 1150000 0>;

		rgltr-load-current = <5000 35000 301000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk5_active

				 &cam_sensor_active_rst5>;

		pinctrl-1 = <&cam_sensor_mclk5_suspend

				 &cam_sensor_suspend_rst5>;

		gpios = <&tlmm 105 0>,

			<&tlmm 115 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK5",

					"CAM_RESET5";

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <19200000>;

	};



	qcom,cam-sensor5 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <5>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008j_l5>;

		cam_vdig-supply = <&pm8008j_l1>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1100000 0 3200000>;

		rgltr-max-voltage = <1800000 2800000 1150000 0 3960000>;

		rgltr-load-current = <5000 35000 301000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk5_active

				 &cam_sensor_active_rst5>;

		pinctrl-1 = <&cam_sensor_mclk5_suspend

				 &cam_sensor_suspend_rst5>;

		gpios = <&tlmm 105 0>,

			<&tlmm 115 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK5",

					"CAM_RESET5";

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <19200000>;

	};

};