Loading drivers/soc/qcom/Kconfig +9 −0 Original line number Diff line number Diff line Loading @@ -221,6 +221,15 @@ config QCOM_SDMSHRIKE_LLCC can start using the LLCC slices. If unsure, say n. config QCOM_SM6150_LLCC tristate "Qualcomm Technologies, Inc. SM6150 LLCC driver" depends on QCOM_LLCC help Say yes here to enable the LLCC driver for SM6150. This is provides data required to configure LLCC so that clients can start using the LLCC slices. If unsure, say n. config QCOM_SDM845_LLCC tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" depends on QCOM_LLCC Loading drivers/soc/qcom/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -46,6 +46,7 @@ obj-$(CONFIG_QCOM_SHIMA_LLCC) += llcc-shima.o obj-$(CONFIG_QCOM_YUPIK_LLCC) += llcc-yupik.o obj-$(CONFIG_QCOM_SM8150_LLCC) += llcc-sm8150.o obj-$(CONFIG_QCOM_SDMSHRIKE_LLCC) += llcc-sdmshrike.o obj-$(CONFIG_QCOM_SM6150_LLCC) += llcc-sm6150.o obj-$(CONFIG_QCOM_MINIDUMP) += msm_minidump.o minidump_log.o obj-$(CONFIG_QCOM_MEM_OFFLINE) += mem-offline.o obj-$(CONFIG_QCOM_MEM_BUF) += mem-buf.o mem_buf_dma_buf.o Loading drivers/soc/qcom/llcc-sm6150.c 0 → 100644 +92 −0 Original line number Diff line number Diff line // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2017-2018,2020 The Linux Foundation. All rights reserved. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/soc/qcom/llcc-qcom.h> /* * SCT entry contains of the following parameters * name: Name of the client's use case for which the llcc slice is used * uid: Unique id for the client's use case * slice_id: llcc slice id for each client * max_cap: The maximum capacity of the cache slice provided in KB * priority: Priority of the client used to select victim line for replacement * fixed_size: Determine of the slice has a fixed capacity * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if * it't not a reserved way. * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used * by any other client than the one its assigned to. * cache_mode: Each slice operates as a cache, this controls the mode of the * slice normal or TCM * probe_target_ways: Determines what ways to probe for access hit. When * configured to 1 only bonus and reserved ways are probed. * when configured to 0 all ways in llcc are probed. * dis_cap_alloc: Disable capacity based allocation for a client * retain_on_pc: If this bit is set and client has maitained active vote * then the ways assigned to this client are not flushed on power * collapse. * activate_on_init: Activate the slice immidiately after the SCT is programmed */ #define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, wse, rp, a) \ { .usecase_id = uid, \ .slice_id = sid, \ .max_cap = mc, \ .priority = p, \ .fixed_size = fs, \ .bonus_ways = bway, \ .res_ways = rway, \ .cache_mode = cmod, \ .probe_target_ways = ptw, \ .dis_cap_alloc = dca, \ .write_scid_en = wse, \ .retain_on_pc = rp, \ .activate_on_init = a, \ } static struct llcc_slice_config sm6150_data[] = { SCT_ENTRY(LLCC_CPUSS, 1, 1, 128, 1, 0, 0xF, 0x0, 0, 0, 0, 1, 1), SCT_ENTRY(LLCC_MDM, 8, 8, 256, 0, 1, 0xF, 0x0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPUHTW, 11, 11, 128, 1, 1, 0xF, 0x0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPU, 12, 12, 128, 1, 0, 0xF, 0x0, 0, 0, 0, 1, 0), }; static int sm6150_qcom_llcc_probe(struct platform_device *pdev) { return qcom_llcc_probe(pdev, sm6150_data, ARRAY_SIZE(sm6150_data)); } static const struct of_device_id sm6150_qcom_llcc_of_match[] = { { .compatible = "qcom,sm6150-llcc", }, { }, }; static struct platform_driver sm6150_qcom_llcc_driver = { .driver = { .name = "sm6150-llcc", .of_match_table = sm6150_qcom_llcc_of_match, }, .probe = sm6150_qcom_llcc_probe, .remove = qcom_llcc_remove, }; static int __init sm6150_init_qcom_llcc_init(void) { return platform_driver_register(&sm6150_qcom_llcc_driver); } module_init(sm6150_init_qcom_llcc_init); static void __exit sm6150_exit_qcom_llcc_exit(void) { platform_driver_unregister(&sm6150_qcom_llcc_driver); } module_exit(sm6150_exit_qcom_llcc_exit); MODULE_DESCRIPTION("Qualcomm Technologies Inc sm6150 LLCC driver"); MODULE_LICENSE("GPL v2"); Loading
drivers/soc/qcom/Kconfig +9 −0 Original line number Diff line number Diff line Loading @@ -221,6 +221,15 @@ config QCOM_SDMSHRIKE_LLCC can start using the LLCC slices. If unsure, say n. config QCOM_SM6150_LLCC tristate "Qualcomm Technologies, Inc. SM6150 LLCC driver" depends on QCOM_LLCC help Say yes here to enable the LLCC driver for SM6150. This is provides data required to configure LLCC so that clients can start using the LLCC slices. If unsure, say n. config QCOM_SDM845_LLCC tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" depends on QCOM_LLCC Loading
drivers/soc/qcom/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -46,6 +46,7 @@ obj-$(CONFIG_QCOM_SHIMA_LLCC) += llcc-shima.o obj-$(CONFIG_QCOM_YUPIK_LLCC) += llcc-yupik.o obj-$(CONFIG_QCOM_SM8150_LLCC) += llcc-sm8150.o obj-$(CONFIG_QCOM_SDMSHRIKE_LLCC) += llcc-sdmshrike.o obj-$(CONFIG_QCOM_SM6150_LLCC) += llcc-sm6150.o obj-$(CONFIG_QCOM_MINIDUMP) += msm_minidump.o minidump_log.o obj-$(CONFIG_QCOM_MEM_OFFLINE) += mem-offline.o obj-$(CONFIG_QCOM_MEM_BUF) += mem-buf.o mem_buf_dma_buf.o Loading
drivers/soc/qcom/llcc-sm6150.c 0 → 100644 +92 −0 Original line number Diff line number Diff line // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2017-2018,2020 The Linux Foundation. All rights reserved. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/soc/qcom/llcc-qcom.h> /* * SCT entry contains of the following parameters * name: Name of the client's use case for which the llcc slice is used * uid: Unique id for the client's use case * slice_id: llcc slice id for each client * max_cap: The maximum capacity of the cache slice provided in KB * priority: Priority of the client used to select victim line for replacement * fixed_size: Determine of the slice has a fixed capacity * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if * it't not a reserved way. * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used * by any other client than the one its assigned to. * cache_mode: Each slice operates as a cache, this controls the mode of the * slice normal or TCM * probe_target_ways: Determines what ways to probe for access hit. When * configured to 1 only bonus and reserved ways are probed. * when configured to 0 all ways in llcc are probed. * dis_cap_alloc: Disable capacity based allocation for a client * retain_on_pc: If this bit is set and client has maitained active vote * then the ways assigned to this client are not flushed on power * collapse. * activate_on_init: Activate the slice immidiately after the SCT is programmed */ #define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, wse, rp, a) \ { .usecase_id = uid, \ .slice_id = sid, \ .max_cap = mc, \ .priority = p, \ .fixed_size = fs, \ .bonus_ways = bway, \ .res_ways = rway, \ .cache_mode = cmod, \ .probe_target_ways = ptw, \ .dis_cap_alloc = dca, \ .write_scid_en = wse, \ .retain_on_pc = rp, \ .activate_on_init = a, \ } static struct llcc_slice_config sm6150_data[] = { SCT_ENTRY(LLCC_CPUSS, 1, 1, 128, 1, 0, 0xF, 0x0, 0, 0, 0, 1, 1), SCT_ENTRY(LLCC_MDM, 8, 8, 256, 0, 1, 0xF, 0x0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPUHTW, 11, 11, 128, 1, 1, 0xF, 0x0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPU, 12, 12, 128, 1, 0, 0xF, 0x0, 0, 0, 0, 1, 0), }; static int sm6150_qcom_llcc_probe(struct platform_device *pdev) { return qcom_llcc_probe(pdev, sm6150_data, ARRAY_SIZE(sm6150_data)); } static const struct of_device_id sm6150_qcom_llcc_of_match[] = { { .compatible = "qcom,sm6150-llcc", }, { }, }; static struct platform_driver sm6150_qcom_llcc_driver = { .driver = { .name = "sm6150-llcc", .of_match_table = sm6150_qcom_llcc_of_match, }, .probe = sm6150_qcom_llcc_probe, .remove = qcom_llcc_remove, }; static int __init sm6150_init_qcom_llcc_init(void) { return platform_driver_register(&sm6150_qcom_llcc_driver); } module_init(sm6150_init_qcom_llcc_init); static void __exit sm6150_exit_qcom_llcc_exit(void) { platform_driver_unregister(&sm6150_qcom_llcc_driver); } module_exit(sm6150_exit_qcom_llcc_exit); MODULE_DESCRIPTION("Qualcomm Technologies Inc sm6150 LLCC driver"); MODULE_LICENSE("GPL v2");
