Loading include/dt-bindings/regulator/qcom,rpmh-regulator-levels.h +42 −1 Original line number Diff line number Diff line /* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2018, The Linux Foundation. All rights reserved. * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. */ #ifndef __QCOM_RPMH_REGULATOR_LEVELS_H Loading @@ -19,4 +19,45 @@ #define RPMH_REGULATOR_LEVEL_TURBO_L1 416 #define RPMH_REGULATOR_LEVEL_MAX 65535 /* * These set constants may be used as the value for qcom,set of an RPMh * resource device. */ #define RPMH_REGULATOR_SET_ACTIVE 1 #define RPMH_REGULATOR_SET_SLEEP 2 #define RPMH_REGULATOR_SET_ALL 3 /* * These mode constants may be used for qcom,supported-modes and qcom,init-mode * properties of an RPMh resource. Each type of regulator supports a subset of * the possible modes. * * %RPMH_REGULATOR_MODE_PASS: Pass-through mode in which output is directly * tied to input. This mode is only supported by * BOB type regulators. * %RPMH_REGULATOR_MODE_RET: Retention mode in which only an extremely small * load current is allowed. This mode is supported * by LDO and SMPS type regulators. * %RPMH_REGULATOR_MODE_LPM: Low power mode in which a small load current is * allowed. This mode corresponds to PFM for SMPS * and BOB type regulators. This mode is supported * by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type * regulators. * %RPMH_REGULATOR_MODE_AUTO: Auto mode in which the regulator hardware * automatically switches between LPM and HPM based * upon the real-time load current. This mode is * supported by HFSMPS, BOB, and PMIC4 FTSMPS type * regulators. * %RPMH_REGULATOR_MODE_HPM: High power mode in which the full rated current * of the regulator is allowed. This mode * corresponds to PWM for SMPS and BOB type * regulators. This mode is supported by all types * of regulators. */ #define RPMH_REGULATOR_MODE_PASS 0 #define RPMH_REGULATOR_MODE_RET 1 #define RPMH_REGULATOR_MODE_LPM 2 #define RPMH_REGULATOR_MODE_AUTO 3 #define RPMH_REGULATOR_MODE_HPM 4 #endif Loading
include/dt-bindings/regulator/qcom,rpmh-regulator-levels.h +42 −1 Original line number Diff line number Diff line /* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2018, The Linux Foundation. All rights reserved. * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. */ #ifndef __QCOM_RPMH_REGULATOR_LEVELS_H Loading @@ -19,4 +19,45 @@ #define RPMH_REGULATOR_LEVEL_TURBO_L1 416 #define RPMH_REGULATOR_LEVEL_MAX 65535 /* * These set constants may be used as the value for qcom,set of an RPMh * resource device. */ #define RPMH_REGULATOR_SET_ACTIVE 1 #define RPMH_REGULATOR_SET_SLEEP 2 #define RPMH_REGULATOR_SET_ALL 3 /* * These mode constants may be used for qcom,supported-modes and qcom,init-mode * properties of an RPMh resource. Each type of regulator supports a subset of * the possible modes. * * %RPMH_REGULATOR_MODE_PASS: Pass-through mode in which output is directly * tied to input. This mode is only supported by * BOB type regulators. * %RPMH_REGULATOR_MODE_RET: Retention mode in which only an extremely small * load current is allowed. This mode is supported * by LDO and SMPS type regulators. * %RPMH_REGULATOR_MODE_LPM: Low power mode in which a small load current is * allowed. This mode corresponds to PFM for SMPS * and BOB type regulators. This mode is supported * by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type * regulators. * %RPMH_REGULATOR_MODE_AUTO: Auto mode in which the regulator hardware * automatically switches between LPM and HPM based * upon the real-time load current. This mode is * supported by HFSMPS, BOB, and PMIC4 FTSMPS type * regulators. * %RPMH_REGULATOR_MODE_HPM: High power mode in which the full rated current * of the regulator is allowed. This mode * corresponds to PWM for SMPS and BOB type * regulators. This mode is supported by all types * of regulators. */ #define RPMH_REGULATOR_MODE_PASS 0 #define RPMH_REGULATOR_MODE_RET 1 #define RPMH_REGULATOR_MODE_LPM 2 #define RPMH_REGULATOR_MODE_AUTO 3 #define RPMH_REGULATOR_MODE_HPM 4 #endif
