Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c3695015 authored by Andrzej Zaborowski's avatar Andrzej Zaborowski Committed by Tony Lindgren
Browse files

ARM: OMAP: Palm Tungsten E board update 



General update of the board file for Palm Tungsten E. Registers the
platform devices contained in the PDA (ROM chip, keypad, infra-red)
and updates the configuration for USB and MMC, whose config values
were previously guessed in most cases due to lack of documentation
(and now are confirmed by a number of users). Macros for GPIO pins are
moved to a file in include/asm-arm/arch-omap.

Signed-off-by: default avatarAndrzej Zaborowski <balrog@zabor.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 6ea59bb3

arch/arm/mach-omap1/Kconfig

+4 −5
Original line number Diff line number Diff line
@@ -84,11 +84,10 @@ config MACH_OMAP_PALMTE 
	bool "Palm Tungsten E"

	depends on ARCH_OMAP1 && ARCH_OMAP15XX

	help

          Support for the Palm Tungsten E PDA. Currently only the LCD panel

          is supported. To boot the kernel, you'll need a PalmOS compatible

          bootloader; check out http://palmtelinux.sourceforge.net for more

          information.

          Say Y here if you have such a PDA, say NO otherwise.

	  Support for the Palm Tungsten E PDA.  To boot the kernel, you'll

	  need a PalmOS compatible bootloader; check out

	  http://palmtelinux.sourceforge.net/ for more information.

	  Say Y here if you have this PDA model, say N otherwise.



config MACH_NOKIA770

	bool "Nokia 770"

arch/arm/mach-omap1/board-palmte.c

+359 −18
Original line number Diff line number Diff line
@@ -17,49 +17,189 @@ 


#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/input.h>

#include <linux/platform_device.h>

#include <linux/notifier.h>

#include <linux/clk.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/partitions.h>

#include <linux/spi/spi.h>

#include <linux/spi/tsc2102.h>

#include <linux/interrupt.h>



#include <asm/apm.h>

#include <asm/hardware.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/flash.h>



#include <asm/arch/gpio.h>

#include <asm/arch/mux.h>

#include <asm/arch/usb.h>

#include <asm/arch/tc.h>

#include <asm/arch/dma.h>

#include <asm/arch/board.h>

#include <asm/arch/irda.h>

#include <asm/arch/keypad.h>

#include <asm/arch/common.h>

#include <asm/arch/mcbsp.h>

#include <asm/arch/omap-alsa.h>



static void __init omap_generic_init_irq(void)

static void __init omap_palmte_init_irq(void)

{

	omap1_init_common_hw();

	omap_init_irq();

	omap_gpio_init();

}



static int palmte_keymap[] = {

	KEY(0, 0, KEY_F1),

	KEY(0, 1, KEY_F2),

	KEY(0, 2, KEY_F3),

	KEY(0, 3, KEY_F4),

	KEY(0, 4, KEY_POWER),

	KEY(1, 0, KEY_LEFT),

	KEY(1, 1, KEY_DOWN),

	KEY(1, 2, KEY_UP),

	KEY(1, 3, KEY_RIGHT),

	KEY(1, 4, KEY_CENTER),

	0,

};



static struct omap_kp_platform_data palmte_kp_data = {

	.rows	= 8,

	.cols	= 8,

	.keymap = palmte_keymap,

	.rep	= 1,

	.delay	= 12,

};



static struct resource palmte_kp_resources[] = {

	[0]	= {

		.start	= INT_KEYBOARD,

		.end	= INT_KEYBOARD,

		.flags	= IORESOURCE_IRQ,

	},

};



static struct platform_device palmte_kp_device = {

	.name		= "omap-keypad",

	.id		= -1,

	.dev		= {

		.platform_data	= &palmte_kp_data,

	},

	.num_resources	= ARRAY_SIZE(palmte_kp_resources),

	.resource	= palmte_kp_resources,

};



static struct mtd_partition palmte_rom_partitions[] = {

	/* PalmOS "Small ROM", contains the bootloader and the debugger */

	{

		.name		= "smallrom",

		.offset		= 0,

		.size		= 0xa000,

		.mask_flags	= MTD_WRITEABLE,

	},

	/* PalmOS "Big ROM", a filesystem with all the OS code and data */

	{

		.name		= "bigrom",

		.offset		= SZ_128K,

		/*

		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,

		 * 0x7b0000 bytes in the English-only ("enUS") version.

		 */

		.size		= 0x7b0000,

		.mask_flags	= MTD_WRITEABLE,

	},

};



static struct flash_platform_data palmte_rom_data = {

	.map_name	= "map_rom",

	.width		= 2,

	.parts		= palmte_rom_partitions,

	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),

};



static struct resource palmte_rom_resource = {

	.start		= OMAP_CS0_PHYS,

	.end		= OMAP_CS0_PHYS + SZ_8M - 1,

	.flags		= IORESOURCE_MEM,

};



static struct platform_device palmte_rom_device = {

	.name		= "omapflash",

	.id		= -1,

	.dev		= {

		.platform_data	= &palmte_rom_data,

	},

	.num_resources	= 1,

	.resource	= &palmte_rom_resource,

};



static struct platform_device palmte_lcd_device = {

	.name		= "lcd_palmte",

	.id		= -1,

};



static struct omap_backlight_config palmte_backlight_config = {

	.default_intensity	= 0xa0,

};



static struct platform_device palmte_backlight_device = {

	.name		= "omap-bl",

	.id		= -1,

	.dev		= {

		.platform_data	= &palmte_backlight_config,

	},

};



static struct omap_irda_config palmte_irda_config = {

	.transceiver_cap	= IR_SIRMODE,

	.rx_channel		= OMAP_DMA_UART3_RX,

	.tx_channel		= OMAP_DMA_UART3_TX,

	.dest_start		= UART3_THR,

	.src_start		= UART3_RHR,

	.tx_trigger		= 0,

	.rx_trigger		= 0,

};



static struct resource palmte_irda_resources[] = {

	[0]	= {

		.start	= INT_UART3,

		.end	= INT_UART3,

		.flags	= IORESOURCE_IRQ,

	},

};



static struct platform_device palmte_irda_device = {

	.name		= "omapirda",

	.id		= -1,

	.dev		= {

		.platform_data	= &palmte_irda_config,

	},

	.num_resources	= ARRAY_SIZE(palmte_irda_resources),

	.resource	= palmte_irda_resources,

};



static struct platform_device *devices[] __initdata = {

	&palmte_rom_device,

	&palmte_kp_device,

	&palmte_lcd_device,

	&palmte_backlight_device,

	&palmte_irda_device,

};



static struct omap_usb_config palmte_usb_config __initdata = {

	.register_dev	= 1,

	.register_dev	= 1,	/* Mini-B only receptacle */

	.hmc_mode	= 0,

	.pins[0]	= 3,

	.pins[0]	= 2,

};



static struct omap_mmc_config palmte_mmc_config __initdata = {

	.mmc[0]		= {

		.enabled 	= 1,

		.wire4		= 1,

		.wp_pin		= OMAP_MPUIO(3),

		.power_pin	= -1,

		.switch_pin	= -1,

		.wp_pin		= PALMTE_MMC_WP_GPIO,

		.power_pin	= PALMTE_MMC_POWER_GPIO,

		.switch_pin	= PALMTE_MMC_SWITCH_GPIO,

	},

};
@@ -67,21 +207,222 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { 
	.ctrl_name	= "internal",

};



static struct omap_uart_config palmte_uart_config __initdata = {

	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),

};



static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {

	.spcr2	= FRST | GRST | XRST | XINTM(3),

	.xcr2	= XDATDLY(1) | XFIG,

	.xcr1	= XWDLEN1(OMAP_MCBSP_WORD_32),

	.pcr0	= SCLKME | FSXP | CLKXP,

};



static struct omap_alsa_codec_config palmte_alsa_config = {

	.name			= "TSC2102 audio",

	.mcbsp_regs_alsa	= &palmte_mcbsp1_regs,

	.codec_configure_dev	= NULL,	/* tsc2102_configure, */

	.codec_set_samplerate	= NULL,	/* tsc2102_set_samplerate, */

	.codec_clock_setup	= NULL,	/* tsc2102_clock_setup, */

	.codec_clock_on		= NULL,	/* tsc2102_clock_on, */

	.codec_clock_off	= NULL,	/* tsc2102_clock_off, */

	.get_default_samplerate	= NULL,	/* tsc2102_get_default_samplerate, */

};



#ifdef CONFIG_APM

/*

 * Values measured in 10 minute intervals averaged over 10 samples.

 * May differ slightly from device to device but should be accurate

 * enough to give basic idea of battery life left and trigger

 * potential alerts.

 */

static const int palmte_battery_sample[] = {

	2194, 2157, 2138, 2120,

	2104, 2089, 2075, 2061,

	2048, 2038, 2026, 2016,

	2008, 1998, 1989, 1980,

	1970, 1958, 1945, 1928,

	1910, 1888, 1860, 1827,

	1791, 1751, 1709, 1656,

};



#define INTERVAL		10

#define BATTERY_HIGH_TRESHOLD	66

#define BATTERY_LOW_TRESHOLD	33



static void palmte_get_power_status(struct apm_power_info *info, int *battery)

{

	int charging, batt, hi, lo, mid;



	charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);

	batt = battery[0];

	if (charging)

		batt -= 60;



	hi = ARRAY_SIZE(palmte_battery_sample);

	lo = 0;



	info->battery_flag = 0;

	info->units = APM_UNITS_MINS;



	if (batt > palmte_battery_sample[lo]) {

		info->battery_life = 100;

		info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);

	} else if (batt <= palmte_battery_sample[hi - 1]) {

		info->battery_life = 0;

		info->time = 0;

	} else {

		while (hi > lo + 1) {

			mid = (hi + lo) >> 2;

			if (batt <= palmte_battery_sample[mid])

				lo = mid;

			else

				hi = mid;

		}



		mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];

		hi = palmte_battery_sample[lo] - batt;

		info->battery_life = 100 - (100 * lo + 100 * hi / mid) /

			ARRAY_SIZE(palmte_battery_sample);

		info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -

				lo) - INTERVAL * hi / mid;

	}



	if (charging) {

		info->ac_line_status = APM_AC_ONLINE;

		info->battery_status = APM_BATTERY_STATUS_CHARGING;

		info->battery_flag |= APM_BATTERY_FLAG_CHARGING;

	} else {

		info->ac_line_status = APM_AC_OFFLINE;

		if (info->battery_life > BATTERY_HIGH_TRESHOLD)

			info->battery_status = APM_BATTERY_STATUS_HIGH;

		else if (info->battery_life > BATTERY_LOW_TRESHOLD)

			info->battery_status = APM_BATTERY_STATUS_LOW;

		else

			info->battery_status = APM_BATTERY_STATUS_CRITICAL;

	}



	if (info->battery_life > BATTERY_HIGH_TRESHOLD)

		info->battery_flag |= APM_BATTERY_FLAG_HIGH;

	else if (info->battery_life > BATTERY_LOW_TRESHOLD)

		info->battery_flag |= APM_BATTERY_FLAG_LOW;

	else

		info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;

}

#else

#define palmte_get_power_status	NULL

#endif



static struct tsc2102_config palmte_tsc2102_config = {

	.use_internal	= 0,

	.monitor	= TSC_BAT1 | TSC_AUX | TSC_TEMP,

	.temp_at25c	= { 2200, 2615 },

	.apm_report	= palmte_get_power_status,

	.alsa_config	= &palmte_alsa_config,

};



static struct omap_board_config_kernel palmte_config[] = {

	{ OMAP_TAG_USB,		&palmte_usb_config },

	{ OMAP_TAG_MMC,		&palmte_mmc_config },

	{ OMAP_TAG_LCD,		&palmte_lcd_config },

	{ OMAP_TAG_UART,	&palmte_uart_config },

};



static struct spi_board_info palmte_spi_info[] __initdata = {

	{

		.modalias	= "tsc2102",

		.bus_num	= 2,	/* uWire (officially) */

		.chip_select	= 0,	/* As opposed to 3 */

		.irq		= OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),

		.platform_data	= &palmte_tsc2102_config,

		.max_speed_hz	= 8000000,

	},

};



static void __init omap_generic_init(void)

/* Periodically check for changes on important input pins */

struct timer_list palmte_pin_timer;

int prev_power, prev_headphones;



static void palmte_pin_handler(unsigned long data) {

	int power, headphones;



	power = !omap_get_gpio_datain(PALMTE_DC_GPIO);

	headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);



	if (power && !prev_power)

		printk(KERN_INFO "PM: cable connected\n");

	else if (!power && prev_power)

		printk(KERN_INFO "PM: cable disconnected\n");



	if (headphones && !prev_headphones) {

		/* Headphones connected, disable speaker */

		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);

		printk(KERN_INFO "PM: speaker off\n");

	} else if (!headphones && prev_headphones) {

		/* Headphones unplugged, re-enable speaker */

		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);

		printk(KERN_INFO "PM: speaker on\n");

	}



	prev_power = power;

	prev_headphones = headphones;

	mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500));

}



static void __init palmte_gpio_setup(void)

{

	/* Set TSC2102 PINTDAV pin as input */

	if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {

		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");

		return;

	}

	omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);



	/* Monitor cable-connected signals */

	if (omap_request_gpio(PALMTE_DC_GPIO) ||

			omap_request_gpio(PALMTE_USB_OR_DC_GPIO) ||

			omap_request_gpio(PALMTE_USBDETECT_GPIO)) {

		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");

		return;

	}

	omap_set_gpio_direction(PALMTE_DC_GPIO, 1);

	omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);

	omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1);



	/* Set speaker-enable pin as output */

	if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) {

		printk(KERN_ERR "Could not reserve speaker GPIO!\n");

		return;

	}

	omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0);



	/* Monitor the headphones-connected signal */

	if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) {

		printk(KERN_ERR "Could not reserve headphones signal GPIO!\n");

		return;

	}

	omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1);



	prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO);

	prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);

	setup_timer(&palmte_pin_timer, palmte_pin_handler, 0);

	palmte_pin_handler(0);

}



static void __init omap_palmte_init(void)

{

	omap_board_config = palmte_config;

	omap_board_config_size = ARRAY_SIZE(palmte_config);



	platform_add_devices(devices, ARRAY_SIZE(devices));



	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));



	omap_serial_init();

	palmte_gpio_setup();

}



static void __init omap_generic_map_io(void)

static void __init omap_palmte_map_io(void)

{

	omap1_map_common_io();

}
@@ -90,8 +431,8 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") 
	.phys_io	= 0xfff00000,

	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,

	.boot_params	= 0x10000100,

	.map_io		= omap_generic_map_io,

	.init_irq	= omap_generic_init_irq,

	.init_machine	= omap_generic_init,

	.map_io		= omap_palmte_map_io,

	.init_irq	= omap_palmte_init_irq,

	.init_machine	= omap_palmte_init,

	.timer		= &omap_timer,

MACHINE_END

include/asm-arm/arch-omap/board-palmte.h

0 → 100644
+34 −0
Original line number Diff line number Diff line 
/*

 * linux/include/asm-arm/arch-omap/board-palmte.h

 *

 * Hardware definitions for the Palm Tungsten E device.

 *

 * Maintainters :	http://palmtelinux.sf.net

 *			palmtelinux-developpers@lists.sf.net

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#ifndef __OMAP_BOARD_PALMTE_H

#define __OMAP_BOARD_PALMTE_H



#include <asm/arch/gpio.h>



#define PALMTE_USBDETECT_GPIO	0

#define PALMTE_USB_OR_DC_GPIO	1

#define PALMTE_TSC_GPIO		4

#define PALMTE_PINTDAV_GPIO	6

#define PALMTE_MMC_WP_GPIO	8

#define PALMTE_MMC_POWER_GPIO	9

#define PALMTE_HDQ_GPIO		11

#define PALMTE_HEADPHONES_GPIO	14

#define PALMTE_SPEAKER_GPIO	15

#define PALMTE_DC_GPIO		OMAP_MPUIO(2)

#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)

#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)

#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)

#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)



#endif	/* __OMAP_BOARD_PALMTE_H */

include/asm-arm/arch-omap/hardware.h

+4 −0
Original line number Diff line number Diff line
@@ -330,6 +330,10 @@ 
#include "board-voiceblue.h"

#endif



#ifdef CONFIG_MACH_OMAP_PALMTE

#include "board-palmte.h"

#endif



#endif /* !__ASSEMBLER__ */



#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */